Jump to content
SAU Community

Recommended Posts

Hi Guys,

I need some help here. I recenly bought a skyline 93 GTST. I just brought my car to Autobahn today and they list the problem as below which is the most expensive things---Suspension and Brake:

Oil Leak from motor cost $95 just to wash the motor and further cost of changes.

Both outer tie rod ends boots split---$330

Front Catsre Arm Bushes split---$500

Rear Shocks leaking, replace---$535

Brake Pad and Rotor Change---$500

Its like costing me more than $2000 (as i still haven't mentioned others)

My Question is

Does outer tie rod ends boots, Front Catsre Arm bushes and Rear shocks have to be changed? If i don't change, is that still ok to run?? As far as i know it will just affect the wheel alignment and a bit uncomfortable.

Also, Is that worth to pay $90 just to wash the engine and inspect where the oil leak is??? Be Honest, Its not really that serious leaking, so is that common in most of the skyline??

The Brake pad and rotor is ok for me to change as it is the common things...

Please help me...i just want to know is that worth to change the whole suspension system or its ok for me to run normally on the road.

Thankyou thankyou thankyou!!!!!

Boots split (replace at some stage so dirt and grime don't chew out seals and bearings )

Caster arm bushes split ( will affect alignment as it get worse)

Engin bay ( buy some degreser and a weed sprayer from buntings cleans up nice ) probably just your rocket cover gasket

Shocks learning ( replace asap as this will affect traction and can be dangerous !!!)

Thx a lot mate. It is so useful to me. Just the cost is a bit too expensive ($1600 just the suspension parts), I still can drive normally if i don't change the suspension right? I mean the diff will be only a bit hard to turn and control the wheel..but it won't make my car go diff direction worst to worst, is that true???LOL :devil:

Boots split (replace at some stage so dirt and grime don't chew out seals and bearings )

Caster arm bushes split ( will affect alignment as it get worse)

Engin bay ( buy some degreser and a weed sprayer from buntings cleans up nice ) probably just your rocket cover gasket

Shocks learning ( replace asap as this will affect traction and can be dangerous !!!)

If it were me I would look at the tutorial section and do it my self as it will save money . As long as your oil isn't running out weekly I wouldnt worrie for now ! Your leaking shock and caster arm bush would be the first thing I replace asap then fix the leak in the Engin bay and for now just cover the split in your tie rod end boots with gaffa untill you can find some in good nick at the wreckers . I wouldn't advise driving with split caster bushes and leaking shock for long as I said they will only get worse .

Give your Engine bay a good clean with truck degreaser and find out if that leak is bad or not !!!

What a rip bro, I bet you $10 that oil leak is your rear main seal. That's a gearbox-out job. You should replace your shocks if they really are leaking, and replace those bushes, they will greatly improve your handling and ride. It's pretty easy to do as well...

I'd take your car elsewhere as it sounds like your getting ripped.

Tie rod end boots, provided the tie rod end isn't worn you should just be able to fit new boots (alot less than $330), seems like they've quoted you for new tie rod ends? Did they say if they were actually worn?

Front caster rod bushes split, $500? :devil: I did mine recently, the bush kit was $90 trade, maybe $120 retail? Takes half an hour to undo the bolt and two nuts, press out the old bushes (unless it has after-market ones already), fit the new ones and refit the rods to the car.

Rear shocks leaking, get it done. $535 to remove the back seat, shocks, compress and remove the springs and change the shocks over, including parts and labor is reasonable, provided they're fitting a good shock.

Brake pad and rotor change $500? Standard rotors and pads or?

Then a wheel alignment as is always required with suspension/steering work.

Its a big help for me. Thx a lot. The tie rod end boots is quoted as a new one. They said it is split. The Front caster rod bushes..can you tell me what equipment do i need to fix it by myself?? They put the wheel nuts real hard...I kw all the equipment won't be cheap...i mean at least cost me $300 to buy the set. But i just can't unscrew the nuts with a manual spanner.haha,maybe need a electronic one. The Rear Shocks....that's the hard bit...I don't think i can handle this part as it has many steps. The Brake is the standard one as they said...If i can unscrew the wheel, I would rather do it myself as well~

I'd take your car elsewhere as it sounds like your getting ripped.

Tie rod end boots, provided the tie rod end isn't worn you should just be able to fit new boots (alot less than $330), seems like they've quoted you for new tie rod ends? Did they say if they were actually worn?

Front caster rod bushes split, $500? :devil: I did mine recently, the bush kit was $90 trade, maybe $120 retail? Takes half an hour to undo the bolt and two nuts, press out the old bushes (unless it has after-market ones already), fit the new ones and refit the rods to the car.

Rear shocks leaking, get it done. $535 to remove the back seat, shocks, compress and remove the springs and change the shocks over, including parts and labor is reasonable, provided they're fitting a good shock.

Brake pad and rotor change $500? Standard rotors and pads or?

Then a wheel alignment as is always required with suspension/steering work.

If your unsure about any part of it, don't do it. Best bet is to find someone from here in your area with a bit of mechanical knowledge and tools, better off paying them a couple hundred for their time to do the work than have something go wrong. Or take your car to another shop and get it re-quoted (preferably somewhere that regularly works on imports) to see if they can save you a few dollars.

Just get a big long fat torque shifter to break those nuts... I'm pretty scrawny and I managed to break locking wheel lugs that some retard used an impact gun on. All you need is a socket set really. Rear shocks are piss easy btw, not sure what you have to take out in a 33 to get access to strut bolts but I just needed to take off most of the interior boot trims. That's 2 bolts there, and undo another bolt at the bottom of the shock and it just slides out!

Thx for all you guys supporting~I think i will sell it at last. I mean after I pay for 2k in my 93 Skyline, I don't mind, but other parts may start having problem as it is a 93 model and every parts get wear. Do you guys pay high maintainance fee on Skyline series 1 model???

If your unsure about any part of it, don't do it. Best bet is to find someone from here in your area with a bit of mechanical knowledge and tools, better off paying them a couple hundred for their time to do the work than have something go wrong. Or take your car to another shop and get it re-quoted (preferably somewhere that regularly works on imports) to see if they can save you a few dollars.

some of those things are jobs you can to with minimal knowledge and tools.

You could EASILY cut that in half if you have a friend with a couple of basic tools and a spare weekend!

DONT JUST ALLOW YOURSELF TO GET BEND OVER LIKE THAT

I might be wrong, but it sounds like you took your car to Autobarn, which is a parts store. They came out and looked at it, and offered to sell you some parts. Perhaps they exaggerated the costs because they want to err on the safe side. Either way, you need to see a mechanic. If the guy offering to fix your car doesn't have oily hands from working on cars, you need to find help elsewhere.

I agree, the costs estimated are far too high. Castor rod bushes - $100, Steering boots - $40. You could probably get a decent set of second hand rear coilovers for $300 as well, which are best to source from a jap parts wrecker as if they're leaking/blown you can agree exchange (try to make this arrangement prior to purchase).

As for the leaks, just put some cardboard on the floor where you park, monitor the oil and other leaks, and track down their location yourself if wanting to save cash.

Also, do as much research as possible. READ A LOT of technical articles and learn about your car, or you will either:

a) be ripped off by unscrupulous people in the trade who get a sense of how little you know; or

b) have to be spoonfed all the information you need while lacking true peace of mind of how things are running so you could enjoy your driving with safety and confidence.

Hi, just one thing i am worrying about now. My friend is a mechanic and he told me that if i not changing the split outer tie rod ends and the caster arm bushes, my car can lost control very soon (meaning no steering power) and the worst case is the wheel can come off. Is that true???

I might be wrong, but it sounds like you took your car to Autobarn, which is a parts store. They came out and looked at it, and offered to sell you some parts. Perhaps they exaggerated the costs because they want to err on the safe side. Either way, you need to see a mechanic. If the guy offering to fix your car doesn't have oily hands from working on cars, you need to find help elsewhere.

I agree, the costs estimated are far too high. Castor rod bushes - $100, Steering boots - $40. You could probably get a decent set of second hand rear coilovers for $300 as well, which are best to source from a jap parts wrecker as if they're leaking/blown you can agree exchange (try to make this arrangement prior to purchase).

As for the leaks, just put some cardboard on the floor where you park, monitor the oil and other leaks, and track down their location yourself if wanting to save cash.

Also, do as much research as possible. READ A LOT of technical articles and learn about your car, or you will either:

a) be ripped off by unscrupulous people in the trade who get a sense of how little you know; or

b) have to be spoonfed all the information you need while lacking true peace of mind of how things are running so you could enjoy your driving with safety and confidence.

My friend is a mechanic...

How much time can he spend with you and your car?

Let him pore over your report > get the parts > get to work with him: don't just watch him > pay him > you save anyway + you learn heaps. :blush:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...