Jump to content
SAU Community

Recommended Posts

Hey guys,

My rear window washer isn't working and I want to fix it so I've had a closer look at it. The motor on the front washer bottle for the rear is working. I put a shorter hose on it and it shoots water out. I figured that maybe the jet bit on the rear window was blocked. I disconnected the hose that goes to it and tried to shoot the rear window washer, but nothing came out. This tells me that maybe there is a kink in the hose from the front bottle to the rear of the car, or a split; something that isn't allowing the water to get to the rear washer jet.

Does anybody know where the hose travels, front to rear? Are there any common problems etc?

Any help or ideas to get this fixed would be great!

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/343389-fixing-rear-window-washer/
Share on other sites

would be helpful to know car model... i'm going to assume R33 (because thats what i have/ know)

but on the R33's the tube runs down the drivers side of the car then up the side of the rear seat, under the rear parcel tray and to the nozzle.

One thing to check (was an issue with mine) was that near the end of the line at the back, under the parcel tray was a little 1-way valve (so that you didn't have to pump water along the whole tube every time). this had perished and cracked for me hence why mine wasn't working. i just removed it and taped the tubes back together and it seems to work fine enough for me now.

i.ve got a problem with mine that if im on a hill with the bonnet higher then the boot it just drips untill the water runs out! i know is gravity but how do i fix it?

yeah, +1 for broken hose somewhere.

with the issue i described before, the way i found out was exactly like that, went outside to find my car taking a leak :P

i would check the place i mentioned first, just under the parcel tray/ shelf.

yeah, +1 for broken hose somewhere.

with the issue i described before, the way i found out was exactly like that, went outside to find my car taking a leak :P

i would check the place i mentioned first, just under the parcel tray/ shelf.

its actually coming out of the washer jet but only when im on a hill facing up hill

My car does this too, whenever I leave it on a hill all the water drains out, also when I stick the boot in, the water pushes back and out the water spray half way up the rear windscreen, not that big an issue but im worried that over time it may cause rust around the boot seal. Would love to know if there is a common cause for this before I start ripping everything apart.

check that one way valve that i have mentioned before.

in theory even though the water is flowing in the direction it is supposed to, that valve would put up some resistance (which is overcome when the water has the extra force provided by the pump)

that or someone has taken the 1-way valve out, because after i removed mine i noticed when i hit high boost my car wets its self :P

well, there is something in common between the R32 GT-R and R33 S1 sedan at least then, who would have thought :blush:

one day i might bother seeing about a new one way valve, but as i said it's been working ok without one.

Just makes a little squirt when i hit high boost and she gets excited.... oh right, we are supposed to be talking about cars >.>

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Price seems pretty good to me. Also seems a hell of a lot cheaper then buying another vehicle that only ever gets used for towing.  I'm a long way from you mate, I'm a couple of hours out of Brizzy. 
    • New [400]Z, they're available in manual and you don't have to worry about parts scarcity. 
    • Just planning to have the wiring neat and hide as much as possible.
    • The sodium acetate, mixed with citric acid, doesn't actually buffer each other. Interestingly though, if you used Sodium Acetate, and acetic acid, THAT becomes a buffer solution. Additionally, a weak acid that can attack a metal, is still a weak acid that can attack a metal. If you don't neutralise it, and wash it off, it's going to be able to keep attacking. It works the same way when battery acid dries, get that stuff somewhere, and then it gets wet, and off it goes again breaking things down. There's a reason why people prefer a weak acid, and it's because they want TIME to be able to be on their side. IE, DIY guys are happy to leave some mild steel in vinegar for 24 hours to get mill scale off. However, if you want to do it chemically in industry, you grab the muriatic acid. If you want to do it quicker at home, go for the acetic acid if you don't want muriatic around. At the end of the day, look at the above thumbnail, as it proves what I said in the earlier post, you can clean that fuel tank up all you want with the solution, but the rust that has now been removed was once the metal of the fuel tank. So how thin in spots is your fuel tank getting? If the magazine on the left, is the actual same magazine as on the right, you'll notice it even introduces more holes... Well, rust removal in general actually does that. The fuel tank isn't very thick. So, I'll state again, look to replace the tank, replace the fuel hanger, and pump, work out how the rust and shit is making it past the fuel filter, and getting into the injectors. That is the real problem. If the fuel filter were doing its job, the injectors wouldn't be blocked.
    • Despite having minimal clothing because of the hot weather right now, I did have rubber gloves and safety glasses on just in-case for most of the time. Yes, I was scrubbing with my gloves on before, but brushing with a brush removes the remaining rust. To neutralize, I was thinking distilled water and baking soda, or do you think that would be overkill?
×
×
  • Create New...