Jump to content
SAU Community

Recommended Posts

I just picked up my R32 GTR from its quarantine inspection and when I revved the vehicle to about 6K rpm's suddenly heaps of thick smoke began pouring from the exhaust. It seems that the smoke was only generated when the car was in gear as it would thin out when in neutral.

When I stopped the vehicle it wouldn't start again. The engine would turn over but not fire up.

Has anyone experienced similar problems? I have been told it might be a blown oil seal in the turbo.

Any help would be appreciated

Link to comment
https://www.sau.com.au/forums/topic/34355-thick-smoke-pouring-from-exhaust/
Share on other sites

A blown turbo seal would not prevent the car from starting. What colour was the exhaust smoke? The head gasket couldve blown and filled with coolant (the organic head gaskets Nissan put on from the factory are quite worn out after 15 years of hard driving) or you couldve done some more serious internal damage. I assume this is a 15 year old import? If so keep in mind the car would have sat on the docks for quite some time (several months), the fuel would have gone stale and combined with our high temperatures, its not a good combination.

Id take it to a reputable mechanic and get a compression and leak down test and go from there.

A leak down test is similar to a compression test, but instead of telling you how much pressure is in a cylinder, it tells you how much pressure is leaking from a cylinder. Any more than around 25 - 30% leakage is a big problem.

pressure test the cooling system, take plugs out while system is under pressure and crank the motor, if water sprays out....bad news(headgasket). There is also a sniffer they can put over ur radiator filler neck and if it detects and exhaust gases then the dye in the sniffer changes colour, ours goes greeny yellow from the original blue colour. also water in oil and oil in water.

plz don't double post your problem godzillr

also water in oil and oil in water.

1st thing to check..

Id take it to a reputable mechanic and get a compression and leak down test and go from there.

:werd: = worse case scenario. However may just be bad petrol, or due to it sitting there for months with "stale" oil, or a multitude of less serious problems.

If it is an 1989 car, I hope yours is an exception and not going to the common place when 15 year GTR's start flooding the country until the government changes the laws. Feel sorry for you if its serious damage, as a rebuild on RB26DETT is well into the 1000's and you have a lemon.

Everything seems to be intact.

I have just taken it to Skyline Performance Imports in Canberra. Unfortunately they won't be able to have a good look until mid next week. It is looking like it could be expensive.

When I find out what the problem is I will let everyone know.

Everything seems to be intact.  

I have just taken it to Skyline Performance Imports in Canberra.  Unfortunately they won't be able to have a good look until mid next week.  It is looking like it could be expensive.  

When I find out what the problem is I will let everyone know.

Godzillr - let me know how it goes, as I got my R last week and it is looking pretty good. did you hear any loud/bad noises when you reved to 6k?, did it rev cleanly or stutter and fluff? how much fuel did you hav in the car???

good luck with it, look forward to catching up with you.

Danooh- I will certainly let you know and congratulations on your car...

I didn't hear any noises but it did misfire between 5K and 6K rpm's. I picked up the car and it was completely out of fuel. I filled it to the top with BP premium. I drove it for a good 60km's before I had the problem.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..   
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...