Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

Just when you thought you had it all.........

A fellow forum member sent me a link on Gumtree to this:

A 6 page fold out brochure on the ADM's.

Paid through the nose for it but I have never seen this version.

Cheers,

Bob.

post-78207-0-71926300-1371234172_thumb.jpg

post-78207-0-61657200-1371234173_thumb.jpg

post-78207-0-85160500-1371234174_thumb.jpg

post-78207-0-10745200-1371234176_thumb.jpg

  • Like 1

Hi Guys,

I attended the shooting of a dealership promotional video for the upcoming VF Commodore.

A few Aussie/American and Japanese Muscle Cars were required to give the Commodore some presence.

Well...... that was the idea. Quite frankly I think it ran a poor last but anyway I thought I share some of the pics.

Cheers,

Bob.

post-78207-0-17097900-1371282981_thumb.jpg

post-78207-0-13062700-1371282983_thumb.jpg

post-78207-0-60006400-1371282984_thumb.jpg

post-78207-0-92113000-1371282985_thumb.jpg

post-78207-0-39532400-1371282987_thumb.jpg

post-78207-0-95021300-1371282990_thumb.jpg

post-78207-0-31386100-1371282993_thumb.jpg

post-78207-0-10490100-1371282995_thumb.jpg

post-78207-0-83619100-1371282996_thumb.jpg

post-78207-0-49462700-1371283031_thumb.jpg

post-78207-0-21679300-1371283033_thumb.jpg

On 9 news brisbane last night there was footage of a maroon adm gtr that had been stolen and run over road spikes. Bit of a mess, the owner must be shattered. Had aftermarket rims on it. Cant find any footage sorry.

Could this be the car? http://bit.ly/11SmOiI

Looks to me like it is a JDM that has had a roof aerial fitted to it.

Could this be the car? http://bit.ly/11SmOiI

Looks to me like it is a JDM that has had a roof aerial fitted to it.

LOL...... Had me going for a minute.

Yes an jDM that looks like aN ADM at first look.

Bob.

Yep, thats the car. I did only catch a glimpse of it on the telly and I always look for the roof antenna, so you can imagine my horror. Glad to hear it was a JDM not an ADM.

  • 1 month later...

Hi All

I am selling the ADM GTR R32 I have so am looking for advice. It has never been modified except for fitting an engine immobilizer. Would I be correct in thinking it is the only one in as delivered condition? I don't want advertise it with any misleading statements. It's in very good condition otherwise.

No, quite a few are original. I'm pretty sure Bob's is 100% stock. It is certainly a strong selling point though and will assist with its value as there are numerous cars out there with various degrees of modification.

Yes...... Mine is 100% stock too as is Jim's up in Newcastle.

The ADM's are more likely to be stock as they would have been a big buy in their day and still are.

Your best saying "One of very few in original condition."

I think that is a fair statement.

Regards......

Bob.

BTW...... What will your asking price be? Any Pics?

Hi Bob

Thanks for the comments, "One of very few in original condition." is a better way to put it.

I am asking 60K. Shannons have it insured "agreed value" for 50k from 2 years ago.

I'd really like to have a get together one day as Jim and I are a bit isolated up here.

Couple of photos, the handbrake and I. I don't normally look that stupid but it's the best I've got.

Regards

John

post-42257-0-14563900-1377431832_thumb.jpgpost-42257-0-58825400-1377431859_thumb.jpgpost-42257-0-68617300-1377431883_thumb.jpgpost-42257-0-68339000-1377432321_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
    • Hi All, putting the engine back together and everything is perfect except have this plug left over.. any ideas what it is for and where it goes? Is on cold side under the intake plenum *note not a stock plug, as everything has been modified Cheers
×
×
  • Create New...