Jump to content
SAU Community

Recommended Posts

i have a thud noise happening when taking off from 1st, not launching or anything, just normal drive off

any suggestions where my search should being, i was thinking possible engine or transmission mount

car has recently been fitted with new clutch and im assuming the workshop would have mentioned if the transmission mount was stuffed

also how hard is it to change engine mounts without removing the engine itself

Link to comment
https://www.sau.com.au/forums/topic/344327-thud-noise-on-takeoff/
Share on other sites

i have a thud noise happening when taking off from 1st, not launching or anything, just normal drive off

any suggestions where my search should being, i was thinking possible engine or transmission mount

car has recently been fitted with new clutch and im assuming the workshop would have mentioned if the transmission mount was stuffed

also how hard is it to change engine mounts without removing the engine itself

My 32 GTR is also making a thud noise and when i looked under i noticed one of the rear cradle bushes was stuffed so i would check there first. I have not changed mine yet, but im 90% sure that's the problem with mine.

My 32 GTR is also making a thud noise and when i looked under i noticed one of the rear cradle bushes was stuffed so i would check there first. I have not changed mine yet, but im 90% sure that's the problem with mine.

tnx for the suggestion, I'm thinking of taking it down for pedders $14 28 point check to get a comprehensive inspection done

I reckon Engine mount. Does it also thud when you let off? (ie Let off gas before changing into 2nd)

Changing engine mounts is easy,

Jack up front, support car on stands

Jack up engine just enough to take the weight (Make sure you have a nice piece of timber to go between sump and jack)

Out with old in with new :laugh:

EDIT: this if for most cars, I just noticed you are godzilla powered, I have never changed a mount on a GTR so you may wanna find some specific info regarding that mate. (knowing how fun they are to work on lol)

Edited by Mandingo
I reckon Engine mount. Does it also thud when you let off? (ie Let off gas before changing into 2nd)

Changing engine mounts is easy,

Jack up front, support car on stands

Jack up engine just enough to take the weight (Make sure you have a nice piece of timber to go between sump and jack)

Out with old in with new :(

EDIT: this if for most cars, I just noticed you are godzilla powered, I have never changed a mount on a GTR so you may wanna find some specific info regarding that mate. (knowing how fun they are to work on lol)

worn engine mounts, will it be visible and obvious when looking at it under the car that its shagged?

anyone replaced them with engine in?

I've got clunks and thuds, and a nismo engine/gearbox mount kit to go in when i find some time. Dont know if it will fix it....

Check out this thread on replacing them;

http://www.skylinesaustralia.com/forums/Cv...20&start=20

I've got clunks and thuds, and a nismo engine/gearbox mount kit to go in when i find some time. Dont know if it will fix it....

Check out this thread on replacing them;

http://www.skylinesaustralia.com/forums/Cv...20&start=20

u beauty, was looking for this tnx

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
    • Probably. I take it that they are also mentioned to be for R34 Skyline? For example.... RDA has that part as RDA7957. I have the dimpled and slotted version of that on my car https://www.ebay.com.au/itm/285518478694?srsltid=AfmBOopKxMuAFpsxZJdB1cam4D5RAj1f9yJyOttPZLAwXVNCOiwlhrIy This is DBA's top one piece equivalent https://www.ebay.com.au/itm/364246686631?srsltid=AfmBOorbb0XHQgqTvZLgQPhg70nqJtGvdojKnugum3O2LFSr2h-obp8D  
    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
×
×
  • Create New...