Jump to content
SAU Community

Recommended Posts

Hi, as most of you know, any car imported from japan will have a speed limiter/governor/lock which limits the car top speed to merely 180-190km/h only. As most of you also know, our car can do much faster than that :)

Which bring me to my question, how do you bypass/remove the speed limiter/governor/lock for my V36? Is there any other way other than reflashing the ECU?

I've done this to my old V35 using FSC (Fan & Speed Controller) HKS delimiter and it work..Is there any similar bypass for V36? Maybe certain tyoe of HKS SLD(Speed lock delimiter)? Or a new FSC? Or other non-HKS product?

Edited by WeezzerR_1405

Weezer - A quick google search and I found this:

Pivot Speed Meter V has the following functions:

- Provide highly accurate speed display up to 350km/h in Units of 1 km/h

- Remove 180 km/h (140 km/h for Kei Cars) speed Limiter

- Auto measurement of acceleration time for set distance. (Distance setting choices of: 100m, 200m, 300m, 400m)

- G meter to measure torque and brake performance with accurate 0.01 unit display of both acceleration and braking

Size: 51mm × 35mm × 22mm

Product page: http://www.jdmconcept.com.au/index.php?opt...125&cid=253

Install guide: http://www.jdmconcept.com.au/index.php?opt...Pdf&cid=253

Not to highjack thread but what options to the V35 coupe 6MT owners have?

http://www.jdmconcept.com.au/index.php?opt...ail&cid=253 = Pivot Speed Meter V

What other devices are there? i cant find where to by the HKS delimiter ..

Thanks

Weezer - A quick google search and I found this:

Pivot Speed Meter V has the following functions:

- Provide highly accurate speed display up to 350km/h in Units of 1 km/h

- Remove 180 km/h (140 km/h for Kei Cars) speed Limiter

- Auto measurement of acceleration time for set distance. (Distance setting choices of: 100m, 200m, 300m, 400m)

- G meter to measure torque and brake performance with accurate 0.01 unit display of both acceleration and braking

Size: 51mm × 35mm × 22mm

Product page: http://www.jdmconcept.com.au/index.php?opt...125&cid=253

Install guide: http://www.jdmconcept.com.au/index.php?opt...Pdf&cid=253

Weezer - A quick google search and I found this:

Pivot Speed Meter V has the following functions:

- Provide highly accurate speed display up to 350km/h in Units of 1 km/h

- Remove 180 km/h (140 km/h for Kei Cars) speed Limiter

- Auto measurement of acceleration time for set distance. (Distance setting choices of: 100m, 200m, 300m, 400m)

- G meter to measure torque and brake performance with accurate 0.01 unit display of both acceleration and braking

Size: 51mm × 35mm × 22mm

Product page: http://www.jdmconcept.com.au/index.php?opt...125&cid=253

Install guide: http://www.jdmconcept.com.au/index.php?opt...Pdf&cid=253

I already did some google search prior to posting here and did find the 'Pivot Speed Meter V' that you've suggested..however, upon checking its manual/catalogue..it does not support V36 engine, 370z or even V35 for that matter..it might be compatible for speed reading and others..but the Limiter Cut (LC) function will not work...below link is the list of cars compatible to Pivot Speed Meter V:

http://www.pivotracing.com/files/1995247/u...alog-sml-v2.pdf

So yeah..unless someone have tried this on their V36 and it works..i wont be buying it yet...:rofl:

Not to highjack thread but what options to the V35 coupe 6MT owners have?

http://www.jdmconcept.com.au/index.php?opt...ail&cid=253 = Pivot Speed Meter V

What other devices are there? i cant find where to by the HKS delimiter ..

Thanks

Well..i bought my FSC HKS delimiter in a japan website..not sure about australia though

I had a look into this when I first got my 370, came up with nothing but mind you this was 2 years ago & there was hardly anything in the way of modifications (moreso than what little is available today)

I gave up on the idea as it's a useless feature for road going & I realised I wouldn't get much fasterr than 180km/h on a racetrack straightaway before running out of space

good luck with your search :ermm:

maybe Cobb accessport from the US? but not sure if it would even have the speedcut feature & maps would be tuned to US fuel (whatever their RON equivalent they use)

Hi, as most of you know, any car imported from japan will have a speed limiter/governor/lock which limits the car top speed to merely 180-190km/h only. As most of you also know, our car can do much faster than that :D

Which bring me to my question, how do you bypass/remove the speed limiter/governor/lock for my V36? Is there any other way other than reflashing the ECU?

I've done this to my old V35 using FSC (Fan & Speed Controller) HKS delimiter and it work..Is there any similar bypass for V36? Maybe certain tyoe of HKS SLD(Speed lock delimiter)? Or a new FSC? Or other non-HKS product?

Does anyone understand / speak KOREAN????

There is a Korean site that advertises a SPEED LIMIT CANCELLER (SLC) for the Skyline / Infiniti / Z 370 series engine.

There is a YouTube video to prove(!!) their claims.

Does anyone know if cars a speed limited in Korea, like Japan??

It also looks like this module is sold in USA

Check out:

http://www.0motors.co.kr

[ this is a crappy Google translation ]

Infiniti SL, C (Speed Limit Cancler) released!

Young-hsd-one suspension helped us your response Many thanks

This is the second product released SLC.Infiniti

at the end of a long research and development have raised the limit for the best and has been successful in commercialization.

Currently being marketed in Japan, the products of the parent company, but some problems were found

Young munjejeomdeuleulgo complement our product and fix all the best products have been released.

This product is the name of the SLC (Speed Limit Canceler), and followed the vehicle wiring myeotgadakman simply turns off if the speed limit from the development of manufacturing, from production to 100 percent confident that the Republic of Korea domestic technology ^ _ ^ Product column for details INFINITI items are.

  • 6 years later...

Anything New on this Thread i have a 2010 Nissan Skyline KV36 370gt sedan. i keep hitting the limiter and i would love to know some way of getting around it. (Private Roads and Track Ofcourse)

Ebay

HKS SPEED LIMIT DEFENCER

or with the R33 there is a wire from the ecu you cut - its likely your car has one too if you can get a pinout diagram. You could put a switch on it.

  • 3 weeks later...
On 10/06/2017 at 8:47 AM, Trex said:

This sounds like a recipe for disaster. The amount of time it will take you to get over 180 in the v36, you'd need a run way.

Some of us would disagree and argue that it's not about getting to 180 from the moment one takes off at the lights. ;)

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
×
×
  • Create New...