Jump to content
SAU Community

Recommended Posts

  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

Having had an R34 with Xeon lights all I can say is once you've experienced it everything else looks pretty weak.

There seems to be some misconception on this site about these lights.

Firstly they are only permitted for low beam as the startup time delay makes them useless for daylight flashing use.

Your Highbeams are a separate globe and from memory the '33 turns it's lowbeam off on highbeam. If this is so just rewire the lowbeams to stay on.

No way will wiring melt, these globes are 35W not 55W halogen and even accounting for ballast losses the total current draw will be less than halogen.

On startup they may draw more power until up to operating temp but that's about a second only.

The pits can pick you for them if they really want too but it seems strange that BMW's Audi's and Lexus run them stock.

If hassled just revert to halogen temporarily.

They are a great safety benefit so any reasonable pit inspector would let them pass.

Cheers

I just recently installed HID in my R33. Highbeams work fine.

Have been past many cops and haven't been picked up yet. The only attention I get is from other cars and pedestrians due to superiority of light compared to the halogen. Make the car look really cool at night..

It would be interesting to know the legalities as they are pretty damn bright!

nah i was saying that from the lil animation on the site, it was saying how it doesn't allow the use of highbeam, or some utter shit like that, i now truly believe the meaning of don't always believe what you read :bonk:

adrian :D

OH MY GOD

For those that have NOT seen xenons in an R33, see if you can hook up with Chris (CC).

Just went for a spin with him following me and then he took me for a drive, and OMFG!! It is totally amazing.

My girlfriend is going to totally hate me now, because I need xenons. It's that simple.

Jason - didn't evolution R muck about a bit before it got it's act together to provide the dials for the last group buy? or am I wrong and should be told to shut up? :rolleyes:

it was car quest that did the mucking about cam, evo r seem to have caught the same bug that raymond has...it seems.

how many are outstanding now.

Jason....xenons....will they help you keep up with all the other skylines on the cruise. or are you intending to just fall behind and then fry them with light power

i guess if you install the HID kit, and then angle your lights a little more down than usual, especially in a series II with the different headlights then you could prolly get away with it.

the brightness that is

i guess if you install the HID kit, and then angle your lights a little more down than usual, especially in a series II with the different headlights then you could prolly get away with it. 

the brightness that is

tilting the lights down does very little as HID throws light out in all directions..

when I tried to get mine levelled, it came up with a blank reading..

i think a special headlight assembly is required, but not 100% sure

I've just spoken with the Technical Department for Vehicle Examinations in Welshpool and have been advised that:

1. Changing Halogen to Xenon is acceptable, only if the Xenon kit complies with ADR (Australian Design Regulations)

2. They will not supply that in writing, because if the product complies WITH ADR, there is no need for you have it in writing.

It was recommended that I contact places like Hella etc, who make Xenon kits and to discuss with them the situation, and because they are fully aware of the ADRs, they should be able to provide me with any further information.

Later today I will contact Hella and possible Bosch, Panasonic and Phillips (all of whom I have seen have some part to play in the creation of Xenon kits, be it the Ballast or the Ignitor systems) and see what I can find out.

Hicks, not all of us have disposable income to go out and purchase things we want/need at a drop of a hat. Xenon lights up the road so much better than Halogen lights, and as I enjoy night cruising, I feel that is it something that *I* need.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Lets say I wanted to buy this, specifically for this purpose. How do I actually perform the function. Can I still buy a Consult-1? Am I about to be burned by the fact my car is a 2000 model Series 2 R34 and thus will be some stupid other system? Do I just need this -> https://obd2australia.com.au/product/nissan-consult-14-pin-to-usb-ddl-diagnostic-interface-with-ftdi-ft232r-chip/ And with what software?
    • That's probably OK. That's a face to face compression joint between two surfaces with the clamping load provided by those bolts. So.... it's unlikely that the bolts will end up feeling that load in shear, unless the clamping surfaces are not large enough, bolts not got enough tension on them, etc etc to prevent the two faces from moving wrt each other. Which... I would hope the designers have considered, seeing as it's probably one of the most important things the upright has to do apart from resist collapsing in its own right. But yes, it would definitely be worth asking them what their safety factor on that part of the design was. I tend to think that the casting, being a casting, is not necessarily the strongest bit of material in the world. It's about an inch square, and when you think about the loads that are being put into it, you have to wonder what safety factor the Nissan boys (and every other OEM engineer who has designed all the millions of other uprights that look essentially the same) used to account for defective casting, aging, severe impacts on the wheel, etc etc. 
    • Those bolts would be orders of magnitude stronger that cast aluminium though.  And its mainly clamping force, not shear they are dealing with?
    • Except all that twisting force that is breaking a cast piece, appears to be going through 4 bolts in the picture Johnny posted of the BryPar one...
    • The smart approach is to use the gearbox loom from the manual car. Makes it a lot easier - just plugs into the switches on the box and plugs into the main loom up near the fusebox. Then you only need to deal with bypassing the inhibit switch. The other approach requires you to use the wiring diagram to identify those wires by colour and location, perhaps even indulging in a little multimeter action to trace them end to end to make sure, and then.... you will have the answers you need. The R34 wiring diagram is available on-line (no, I do not have a link to it myself - I would have to do a search if I wasn't able to go to the copy I have at home).
×
×
  • Create New...