Jump to content
SAU Community

Recommended Posts

I'm selling my series 2 1996 GTR LM V-Spec. This is one of only 98 ever made as a special edition.

The car was personally imported early 2006 with 68,000km's on the dash. The car currently sits on 109,000kms.

I have the original auction sheet in which it was a grade 4 with grade B interior.

The original importer also completed a full major service at the time of import including new timing belt, water pump etc. Full service and all oils changed (both diffs, engine, gear box) at hyperdrive on the 19/05/2010.

The car has the following modifications:

Nismo Rays LM-GT1 Wheels 18x10 all-round with quallity Toyo Proxe 275/18/35 rubber. Tread still like new on all wheels.

Power FC + Hand Controller

HKS Hi Power Silent Exhaust

Tomei Cam Gears

19 Row Oil Cooler with Relocator

GReedy Profec B Boost controller

GReedy Turbo Timer

Autometer Boost Guage in PSI

Factory rear carbon spoiler

Factory side GTR Decals

Factory front bonnet Lip

RB26 Clear Timing Belt Cover

Custom Pod Heat Shield

Nismo Fuel Cap

Nismo Radiator Cap

Cold Air induction to Pod's

Apexi Induction Kit

Nismo Clear Side and Front indicators

The car now has brand new 20% tint all round.

This car is a genuine collectors item in its original Championship Blue (BT2) colour which can be verified by the engine bay build plate. Overall the car is in very good condition, paint is excellent and interior is very tidy. The pictures don't do it justice, it really needs to be seen.

I only ever run the car on 98 and it's always warmed up and cooled down before and after driving.

If you have any questions please contact me on 0410 039 043.

$24990 ono.

Thanks.

caradrhys.jpg

caradrhys4.jpg

caradrhys3.jpg

caradrhys2.jpg

carsale1.jpg

carsale7.jpg

carsale8.jpg

Edited by gersfan
Link to comment
https://www.sau.com.au/forums/topic/345428-r33-gtr-v-spec-lm-limited/
Share on other sites

aww man, if only this was for sale when i was looking i would have snapped it up straight away.

great looking car man and a bargain too!

wow, that is nice, pity its so far away from most of the buyers which I'd say would be on the east coast, although someone over there in the west will no doubt pick it up and be very happy with it ......

absolutely love this shot of it, looks not too dissimilar to the wrx blue colour .....

caradrhys4.jpg

Edited by Simon_Koala

looks like an awesome ride... couple of q's...... does the air con still work, and what is the power out put (do you have a dyno sheet) cheers

http://www.yourfilelink.com/get.php?fid=589499

looks like an awesome ride... couple of q's...... does the air con still work, and what is the power out put (do you have a dyno sheet) cheers

http://www.yourfilelink.com/get.php?fid=589499

Air-con works fine. I haven't had it on a dyno but it's a pretty conservative tune, ping is extremely low the rev limit is 7k although you can increase it with the controller if wanted. I would guess 280-300 awhp.

When I bought it I had plans to finish the exhaust, upgrade the turbo's and retune etc but my life has changed direction so modifications have stayed the same as when I got it.

And navan that's a nice 32 you have

Edited by gersfan
open to swaps? or are u after cash.

vy clubsport.

I'd consider swaps but it would need to be cash my way and a car I don't need to fully insure

thanks though

  • 2 weeks later...

Hey mate my aunty lives in Perth and I am going to get her to come have a look at the car if it doesn't sell by sometime next week. She is a mechanic so she can do all the scouting for me while she is there which helps. Beautiful car, I am chasing a 32gtr but this is a unique example that I would like to own for awhile.

just a couple questions. Did the car come with the powerfc installed so the tune was already on the car? If not can you get a dyno sheet for it.

Sweeeeeeeeet

Hey mate my aunty lives in Perth and I am going to get her to come have a look at the car if it doesn't sell by sometime next week. She is a mechanic so she can do all the scouting for me while she is there which helps. Beautiful car, I am chasing a 32gtr but this is a unique example that I would like to own for awhile.

just a couple questions. Did the car come with the powerfc installed so the tune was already on the car? If not can you get a dyno sheet for it.

Sweeeeeeeeet

It already had the powerfc and tune when I purchased it, I don't have a dyno sheet.

Serious buyer with money can drive it and feel it for themselves, I'm guessing 280awhp but I don't know. Is capable of much more with a solid tune and full exhaust I'm sure.

I've had a few enquires about swaps so I'll just put this out there. If I was to take a swap if would need to be worth 10k max, and preferably a 4 cylinder.

Thanks

Edited by gersfan

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks mate, couldn't find in VIC, ended up ordering one from NSW, getting rwc to get new plates and registration done.
    • Before all the EFR fan boys come in, have a look at: https://www.garrettmotion.com/racing-and-performance/performance-catalog/turbo/g-series-ii-g30-825-58mm/ It also comes in a T4 1.06 divided housing. I would dare say if you want response & also decent power, this thing would chop.   AND apologies, just re-read your post, you've already bought the turbo... whatever you do, make sure you stick with divided housing and proper twin scroll manifold.
    • People have got to stop doing that. ShatGPT is not a search engine. It is a hallucination factory.   I also would recommend the 1.05. The .83 will "work" for you , in that it will be more responsive, but I think you'll find that it won't be anywhere near as good running it out to 8000rpm as the big housing will be.
    • Decided for the first time ever I would tow my car TO the track day on the same working theory as bringing tools and spares "if I have it I wont need it, but if I leave it behind i will 100% need it" all setup and ready to go out and try these A050 for the first time First session showed I needed to stiffen up the dampers a touch but still managed a few 1:21's without much effort. things were looking good. Came in a dropped the tyres down  to 26/28 as they had gotten to 35/33C from 22C cold The first lap of session two I managed to drop into 1:20's. Then in the second lap into the second session. Coming into T3 and I suddenly lost brake pedal followed by some huge rear end vibrations and scraping sounds. Got it back into the pits after session ended and found this. in the attached video, all of the wobble is in the hub its self, wheel is mint, and bearing feels tight. lKXLqpd - Imgur.mp4   Deciding it was a bent spindle I tried to find bearing/hub assembly locally but was unsuccessful so it was loaded back onto the trailer i luckily brought it on to drag it back home  
    • 1.05 you’ve gotta let it breath 
×
×
  • Create New...