Jump to content
SAU Community

Recommended Posts

Take a look at your own passes of late for example. You have done about 5+ 13.4-13.5's and then a 13.0 and a 13.1

If consistency is the issue, I would challenge you to look at the two times alone that were run AFTER the nitrous/over-rich condition was fixed.

13.0 @ 115.15mph

13.1 @ 115.56mph

Within a tenth of each other and also within half of one mph.

The 3 runs before that were revving only to 6krpm as the car was over-fuelling and turning into a slug (as evidenced by the massive black smoke plumes the car expelled just before every gear change.)

The car felt GREAT on the last two passes of the day....A different car that freely revved to a peak of 7298 rpm with gear changes coming within 100 rpm of this each time. Boost was stable and even for the majority of the run and the car suffered none of it's previous bogging up top as the fuel prob was fixed with correct jetting.

Ther point is this. Every time I run the car, I am aiming to get the absolute most out of it for that run. I don't care if i have a bad launch cos something about the WHOLE run could tell me something I didnt know before. I'm gonna come out and say it that I beleive a low 12 is possible in my car with Radial tyres - RIGHT NOW. Tell me why I should aim for 12.7 when 100 years of drag racing maths and some common sense tells me otherwise?!?!? Tell me why I should be dissapointed with running 14.0 in a stuffed-up run on the way to getting there?!?!?!

As a point of interest, after 4 meets and about 15-20 different runs, I am YET to have a day or night at the track where the car runs more than 0.5sec +/- different for the session.

I'm sorry mate but it just doesn't make sense to me to aim for the mud when there's so much better there waiting.

Adrian

  • Replies 59
  • Created
  • Last Reply

Top Posters In This Topic

I would really like conformation on this.

What is the quickest ET / MPH that an R32/R33/R34 GTS-T/GTT has run with the std turbo intact and untouched?

Will also start a new post in General Auto asking the same question.

Adrian

 

I just wouldn't be going to the track aiming to knock 0.5->0.9sec off "just like that" because the mph says its possible.  

Why? The whole idea about going to the track is to see how fast you can get the car moving. If its capable, try different techniques until you get there.

If it was that easy many more people would be doing it.

Think about it... you have 12-14sec to do what u gotta do. A minor 0.1-0.3sec stuff up anywhere along that 400m is gonna ruin a good time.

I just think consistency is the key to a 'quicker' time. With a 115mph TS a 12.1 flat would not be out of the question thats a whole 0.9sec faster than what has currently been done

I think this consistency thing you're on about refers to driver ability (ie practice makes perfect). The reason why most people run a super time around slightly slower times is for that 1 super run they got everything right. What they need to do is try and mimic these actions again and again until consistency is achieved. Achieving consistency for a slower time may provide good training for a faster pass but its really selling the car and yourself short.

Hope that makes sense...

13.0 @ 115.15mph

13.1 @ 115.56mph

I'm sorry mate but it just doesn't make sense to me to aim for the mud when there's so much better there waiting.

Adrian

i totally agree there is shit tins left in it going by the mph.

what are your 60ft times outta interest?

Both of those runs were with high 2.2's.

Have gone 2.0 on more than a couple of occassions when the tyres didnt suck.

Hoping for the same mph on 2.0's then 1.8 on some Drag Radials.

Adrian

note... slicks :D

Fair enough i aint got a stock turb, but i ran 12.9 @ 109mph... with 2.1 60ft.

On your average 225 street tyre. And my car weights in the same as yours, and you have a decent advantage with your IRS setup

You need rubber mr 2rismo i think!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...