Jump to content
SAU Community

Recommended Posts

Ok, this engine was built for my track R32 before the Tax man put a stop to the project! The engine was built and has not been unused or put into a car since it was rebuilt. It is sitting in UASs engine room and is ready to drop in. Would suit someone looking for a new donk for their GTR.

The engine has the following components and internals.

RB30 block, machined and prepared by ARC.

RB26 GTR head which has been serviced, STD cams (Not sure which model)

Forged Eagle Rods and CP Pistons and rings 40 thousand over size

Some port matching has be done, but I cant comment to the extent, the head gasket was sized for a TO4Z

GTR Plenum and throttle body

Crank has machined and has Nismo rings (I think)

GTR oil and water pump

T4 high mount single manifold

External waist gate

GTR starter motor and alternator

RB25 sump (only bolted by a few bolts so easy to change)

A single variable cam sprocket for the exhaust side.

This engine if for sale whole and will not be separated as parts

Price $5900

Any questions please PM me and if you wanted to see the engine it is at UAS in Seven Hills

post-42-1291065618_thumb.jpg

post-42-1291065650_thumb.jpg

post-42-1291065680_thumb.jpg

post-42-1291065705_thumb.jpg

post-42-1291065736_thumb.jpg

post-42-1291065949_thumb.jpg

post-42-1291065998_thumb.jpg

  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You know how your car rolled through a fence in your last jacking escapade? Scissor jacks increase the likely hood of that sort of thing happening immensely!
    • http://calfinn.com.au/product/1500kg-standard-trolley-jack-cj-2t-c/1500kg-standard-trolley-jack-cj-2t-c   I have this and fits under a S3 33 GTR with no issues. Purchased in 2009 and not one issue. It was $950 back then. Not cheap but something so important isn’t worth cheaping out on.
    • Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
    • Welcome! New member myself, but I had an R33 back in 2002. Best advice I could give, based on my experience: if you're running the factory turbo, be very conservative with boost. I made the mistake of just fiddling around with the boost controller and cranking the boost for fun, and the end result was my intake pipes popping off frequently from the constant deluge of oil that was being blown into the recirc by the stressed-out turbo, which itself was siphoning oil from the engine and farting it out both sides of its centre bearing (or something to that effect). If I could do it all again, I would have gotten a new turbo and had a tune dialled in professionally and then just left it alone! Funny you mention the metal shavings in the gearbox, as I had the same thing - the probe plug (magnetic drain plug, essentially) would come out caked with shavings. At least it was doing its job. Not sure if that's just sacrificial wear and part of the deal, or if my gearbox was shagged, but I wasn't abusing it. Enjoy the R33 - they're a dying breed, and if they weren't $35k+ on CarSales in Queensland, I might have picked up one of those again, instead of the 370GT I own now (though I'm loving the 370GT, that big 3.7L V6 just hits different).
    • Howdy folks. I owned an R33 back in 2002, which was thoroughly beyond my capacity (financially speaking) to maintain/insure, so we parted ways in 2004. Fast forward 21 years (to literally yesterday, in fact) and I'm now the proud owner of a 2007 V36 370GT. I'm happily surprised by how much power the VQ37VHR makes, compared to the RB25DET, considering the latter is turbocharged. I had planned to add a turbo at some point but I'm on the fence about whether I'll even need it (though I do love the sudden onset of extra torque). Any other 370GT owners around the traps, I'd love to hear about your experiences with this car (good and bad).
×
×
  • Create New...