Jump to content
SAU Community

Recommended Posts

just changed all my fluids except the rear diff, how many kms should I be going between changing rear diff oil, standard R33 GTR sreies1 diff , car is 800+hp and sees the track once a month-ish along with some "normal" street stuff a few times a week ? if that matters?

Link to comment
https://www.sau.com.au/forums/topic/346240-diff-oil-change/
Share on other sites

Good synthetic gear oils are incredibly tough. You typically triple the drain interval. So for an ordinary car, go from 100,000kms to 300,000kms. Not sure what that means for your 800hp beast tho.

Link to comment
https://www.sau.com.au/forums/topic/346240-diff-oil-change/#findComment-5576145
Share on other sites

Good synthetic gear oils are incredibly tough. You typically triple the drain interval. So for an ordinary car, go from 100,000kms to 300,000kms. Not sure what that means for your 800hp beast tho.

cheers Stabby, 30000-50000 you'd think at least.. was only done about 5000 ago, so won't worry about that for a while...

would it be similar for the OS giken two way in the front? :(

Link to comment
https://www.sau.com.au/forums/topic/346240-diff-oil-change/#findComment-5576422
Share on other sites

cheers Stabby, 30000-50000 you'd think at least.. was only done about 5000 ago, so won't worry about that for a while...

would it be similar for the OS giken two way in the front? :(

Yeah i'd say so - the only concern it if it gets cooked, but synths handle heat a lot better as well. If you're paranoid get the oil tested, say after 20,000 and then you'll get an indication of how long it lasts under 800hp of punishment.

Link to comment
https://www.sau.com.au/forums/topic/346240-diff-oil-change/#findComment-5576481
Share on other sites

Best time to know when it needs changing is when it goes black, when my mechanic changed every drivetrain fluid (front & rear diff, attessa, transfer case, gearbox, clutch, brakes), all of them were black, except for the front diff which still looked brandnew. I'm guessing because the ATTESSA system is a part-time system, the front diff could go alot longer without changing than the rear.

Link to comment
https://www.sau.com.au/forums/topic/346240-diff-oil-change/#findComment-5578283
Share on other sites

Best time to know when it needs changing is when it goes black, when my mechanic changed every drivetrain fluid (front & rear diff, attessa, transfer case, gearbox, clutch, brakes), all of them were black, except for the front diff which still looked brandnew. I'm guessing because the ATTESSA system is a part-time system, the front diff could go alot longer without changing than the rear.

yeah that may be the case normally, but I think my front does more work than normal, spins all 4 a bit when boost hits in first, and I have torque split controller, so put more to the front than factory.

But if I'm going to the effort of getting the car on a hoist or off the ground enough to check diff oils, I'll just change them for the cost of a bit of oil. i like the idea of getting it tested at 20k or there abouts, then I'll know if its still good, just started doing this with the engine oil and its well worth the $35, I'd recommend everyone does it, gives you some handy info about your motor.

Link to comment
https://www.sau.com.au/forums/topic/346240-diff-oil-change/#findComment-5578336
Share on other sites

man i wouldnt worrie about it aye, change it but dont worrie about changing it all the time, every 50k's maybe id leave it longer. with 800hp behide it the oil isnt gunna save it, no matter how new it is.

Link to comment
https://www.sau.com.au/forums/topic/346240-diff-oil-change/#findComment-5578485
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
    • Continental have consistently beaten the absolute shit out of every other performance tyre in Wet/Damp/Cold conditions and give up a little bit of time (half a second at most) in the dry. Almost like it's engineered for German conditions or something. I'd def give those a try.
×
×
  • Create New...