Jump to content
SAU Community

Recommended Posts

RB26 gtr head for sale, off a R32, comes with covers, cams, valves, intake plenum , throttle bodies with linkages, $1600

Tomei procams, 264 duration and 10.25 lift both sides, $600

Supertech bronze valve guides, $200 delivered

Gates racing adjustable cam gears for RB26, same as HKS but just a different colour $250, brand new

Pm me or message me on 0434121069

Pm sent

Photos of head, note manifold is not included hahaha

155836_465415666255_721026255_6194495_3188808_n.jpg\

67835_465414686255_721026255_6194491_2700895_n.jpg

65868_465413931255_721026255_6194485_4317391_n.jpg

Valve guides, not there is 24 of them just got a pic of two packs

232babb0.jpg?t=1292449573

Edited by Althotas

Hi, could i have the numbers stamped of each the camshafts to identify the specs and any other tale tell signs.

I cannot find Tomie 264 10.25 cam references.

Maybe something else, another brand, Tomie different specs, Kelro cam......

bump, cheers mate

Head now $1500 and will throw in a brand new genuine nissan headgasket :)

Hi

I guess the head is in need of valve guides as they were listed for sale as well

could be interested

Regards Devo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...