Jump to content
SAU Community

Recommended Posts

Fishing around for some track rims to put on my R32 GTR.

I figure either R33 or R34 GTR rims would do the job.

I don't want to spend more than $1000 for the 4 rims....

I suppose something in Melb/Vic would be nice so I can come and have a look.

Jack 0401 994 746

Link to comment
https://www.sau.com.au/forums/topic/348059-r33-or-r34-gtr-wheels/
Share on other sites

Just to be specific, I'm after R33 GTR wheels or R34 GTR wheels.

I suppose I'm not fussed what model wheels they are as long as they are 18" x 9/9.5" ish... with the right offset.

I'd even consider 17" rims with the same width and offset, but the price would need to be right too.

I just don't want cheap and nasty no-name brand rims....

Thanks for looking!

Edited by JZP

Hi Mate

I have two sets of 34 GT-R Rims discounted in this thread here

http://www.skylinesaustralia.com/forums/topic/347178-discounts-on-te37-gtr-stockies-and-heaps-more/

great wheels for track - forged, light and because they're common - if you wreck one, it's very easy to find a replacement (I always have a few spares kicking around for this reason)

You won't get 34 GT-R rims for around the thousand mark, but I have these - which are closer to that budget and they're a good quality rim, just an older design.

http://www.importmonster.com.au/shop/product_info.php?products_id=1087

I also have some Advan tri spokes in 18 x 10 that are rough, but structurally sound for $950 the set - I was just going to give them a coat of black paint and use them on my 32 but.. well, I have too many wheels.. something's gotta give :)

I got stock R34 GTT 17" rims lying in my garage, 80% thread

let me know if you want them, throw me a price

then I'll find out how much the postage is from Brisbane to your place (Melb right?)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The speedo's can be very conservative, when my Mazda NC MX5 speedo is showing 118kph, the GPS, and a calibrated radar.... cop mate.....hits me at around 110kph +/- 1 or 2 kph, and that is on a 215/45 17, stock tyres size is 205/45 17 as well, so weirdly conservative with stock tyre size When my Commodore speedo red 116kph GPS had me at 110kph After doing some offset and clearance measurements to see what can fit the NC on 17x8 +40, without guard rolling or rubbing anything at my current ride height, I've decided that when my tyres are toast, I'm going to fit 225/45 17 and see where that gets me IRT actual speed of my speedo and GPS/radar From the online calculator I should be still be doing around 5kph under an actual 110kph when the speedo is showing 110kph My ADHD requires that when I'm doing 110kph on the speedo, that the actual road speed is actually really close to that, and not alot slower And going from 205 to 225 still keeps the car within the %/mm allowable in the NSW vehicle rules and regulations, which is nice, as long as I'm looking at the latest version that is.....LOL https://www.nsw.gov.au/sites/default/files/2021-02/RMS-13.464-Light-vehicle-modifications-Vehicle-Standards-Information-No-6-November-2013.pdf
    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
    • Does the scanner do all the CUs in the car, or only the ECU?
    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
×
×
  • Create New...