Jump to content
SAU Community

Gt3582R Compressor Surge

l0WRB

By l0WRB,
in Engines & Forced Induction

 Share

Recommended Posts

l0WRB Mentor

l0WRB

Posted
Posted

anyone know where to start looking..

gettin bad compressor surge in 3rd gear full throttle running 20psi, happens really bad if im doing 60kmph in a higher gear..and put my foot down.

wont surge in 1st or 2nd ..

only really started doing it recently..

4" intake with 4" filter thats only 6months old?

any ideas?

Link to comment
https://www.sau.com.au/forums/topic/348357-gt3582r-compressor-surge/
Share on other sites
R31Nismoid Grand Master

R31Nismoid

Posted
Posted

a stock 2.5ltr is gonna have a hard time ingesting that much air IMO.

Most people using a GT35 either have a 25/30 or a 25 head thats been tidy'd up a bit and so on.

BOV setup and so i assume is all functional?

l0WRB Mentor

l0WRB

Posted
  • Author
Posted

a stock 2.5ltr is gonna have a hard time ingesting that much air IMO.

Most people using a GT35 either have a 25/30 or a 25 head thats been tidy'd up a bit and so on.

BOV setup and so i assume is all functional?

I don't run a bov

but i could test out a bov which i have lying around here.

Its just weird that its only started doing it recently.

infact it could have been happening earlier its only since i got the external gate plumbed back into my exhaust that i can actually hear the motor etc..

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

ah... key information you missed.

there is no way, under load in 4th, the gate will be opening.

so external or not, you should quite easily be able to work that out.

either way you might need a GTR BOV that leaks low throttle, it might alleviate.

otherwise it could also be in the tune which is another point.

My GT3040/600HP had ever so slight surge at around 2200-2400rpm from memory. barely audible at the best of times and didn't hurt the graph majority. Only did it in 5th as well so wasn't much of an issue. the larger comp wheel in the 35 will just make it more noticeable over mine.

l0WRB Mentor

l0WRB

Posted
  • Author
Posted

Yes you prob are right i dont think gate opens until around 16psi.. so i should have heard it.

well the bov i have here is just a blitz bov and the spring is soft, but i was using this bov 2 weeks ago when i was out and about one night and thats when i first picked up on the surge ..

might pull intercooler off and give it a clean could be restricted ? oil residue?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • JC71
      new 1.5 LSD issues/concerns

      By JC71 · Posted

      the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
    • TurboTapin
      Most women will agree that parking is the most taxing part of driving

      By TurboTapin · Posted

      What a time to be alive!!
×
×
  • Create New...