Jump to content
SAU Community

Recommended Posts

Hi Guys, I'm new to this forum but would like to try and get some answers please. I've been looking around at several dealers to buy a 2008 Skyline 370GT or later and whilst the pricing varies (give or take $5K) all the vehicles I've looked at generally have mileage under 10K. Now call me old fashioned, but this makes me very suspicious that the odometer has been wound back either in Japan or here, particularly since they are all 2007 or 2008 models. Is there any other logical reason as to why the mileage is so low or is my suspicion correct? Any help would be appreciated, as I don't want to end up with a car that has had 50-100K wound off the odometer.

Link to comment
https://www.sau.com.au/forums/topic/348968-imported-skyline-odometer-readings/
Share on other sites

I'd be requesting from the seller, the auction sheet, deregistration form for the car and also the service manual for the vehicle, K's marked on these should be consistant with the odometer reading. If the seller can't come up with one or more of these be very careful going ahead, personally I would walk away given the prices dealers are asking for these.

Less than 10000ks the car should look virtually new. No wear on pedal rubbers, switchgear and the like. Have a look around the driver's door jamb for signs of dealer service stickers (or remnants of) that may have been removed to conceal the true ks.

Thank you, your advice is much appreciated - knowing little about these types of imports what you have given me will be very useful. Thanks Again.

I'd be requesting from the seller, the auction sheet, deregistration form for the car and also the service manual for the vehicle, K's marked on these should be consistant with the odometer reading. If the seller can't come up with one or more of these be very careful going ahead, personally I would walk away given the prices dealers are asking for these.

Less than 10000ks the car should look virtually new. No wear on pedal rubbers, switchgear and the like. Have a look around the driver's door jamb for signs of dealer service stickers (or remnants of) that may have been removed to conceal the true ks.

Admittedly I was pretty skeptical myself when I was purchasing. I even came across a 2007 V36 with only 900km. According to my agent, extremely low km cars come up a lot and is normal.

In the end I purchased a 2007 with ~6000km. Was told by the agent that the condition was consistent with kms. When I got the car, they weren't kidding. Interior was basically brand new, even with the smell. Service manuals also looked legit and were consistent. Paintwork was a bit worn, not bad, but not great. I put that down it being a black car, and most likely the car spent most it's time outside. Nothing a weekend with meguiars couldn't fix.

Even the compliance workshop commented on how new it looked. Actually made it easy for them to comply and get it through quickly.

It probably pays to use a reputable agent for that assurance. I used prestige motorsport and they were first class. Highly recommended.

Edited by SyKRyD

Thank you for your comment and advice, it's also appreciated.

Admittedly I was pretty skeptical myself when I was purchasing. I even came across a 2007 V36 with only 900km. According to my agent, extremely low km cars come up a lot and is normal.

In the end I purchased a 2007 with ~6000km. Was told by the agent that the condition was consistent with kms. When I got the car, they weren't kidding. Interior was basically brand new, even with the smell. Service manuals also looked legit and were consistent. Paintwork was a bit worn, not bad, but not great. I put that down it being a black car, and most likely the car spent most it's time outside. Nothing a weekend with meguiars couldn't fix.

Even the compliance workshop commented on how new it looked. Actually made it easy for them to comply and get it through quickly.

It probably pays to use a reputable agent for that assurance. I used prestige motorsport and they were first class. Highly recommended.

I used Prestige Motorsport too, Geoff is great.

My DEC 2007 V36 had 10,600kms on it, as per the auction sheet and the service manuals. Mind you I paid a bit more at auction for such a low KM car, the value IMO is to be had with the ones with 'high' KMs. One similar spec/colour sold with 50,000kms for considerably (i.e. $15k) less. If it's well looked after that's somewhat irrelevant.

I wouldn't touch a local one if they didn't have books or auction papers, cars that new should almost always have them.

  • 2 years later...

Looks like you've already got all the information you need, it's not uncommon for these cars to have very low km's coming from Japan where they don't do alot of driving especially if the car lived in the city.

Most important thing i think would be just determining how clean the interior is for it's age & km's check common wear parts of the car such as tears in the leather, possibly a bit of wear on the gear knob, steering wheel then overall condition.

goodluck

also you should have the auction sheet and the inspections sheet. My car had two inspections and the KM's lined up over all of that time. Mines done 80,000 over 10 years now which is pretty high, but it was from a more regional area of Japan

Umm. I think you are replying to Haxorz's post made 2 years ago..

manc01 just jumped in to ask how easy it is to adjust the odo..

Not sure exactly, but I believe most tuners would have access to the tools required to adjust the odo to whatever they want. Like with all imports, you should check other items for wear, this will help identify a false Odo reading..

How is the odometer actually wound back? If it is as common as everyone seems to think then it must be pretty simple??

Electronically.

One of the guys came across an item in yahoo Japan auction the other day that was a service to wind back the clock. If the condition of the car doesn't match whats in front of you, then its been wound.

There are other things like De-Reg certs that capture the kms based on the last 3 years (I think), and of course the auction sheets for the car.

But really, what does it matter - buy off condition rather than the number on the dash. We all know most of the dealers wind it back. Its no big surprise.

brakes are a good thing to check too.. if it shows 10,000km on the odo, but has 'lipped' brake rotors.. you will know something is wrong..

not really, I heard v35's chew through rotors like no tomorrow.....it's not uncommon to see lipped rotors on only 20000-30000kms if it was driven hard...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...