Jump to content
SAU Community

Recommended Posts

f**k it, I'm happy to pay the $10 once the mats actually show up.

I can't pay before they show up, because i'd feel like an idiot transferring more money to a guy who took my money months ago and so far hasn't delivered anything or even kept in contact

Guys, i emailed ashlee from mat craft and here is their response.

Yes the order left our work shop on the 18th of March. I have just traced it and it shows that it was delivered on the 23rd March. The order we received is as below.

I have read through your forum and see that some of your members have complained about the price increase of $10 and that if he paid straight away we would have had to honour the initial quote.. Please note that the prices he had obviously given you were from Feb 2010 which is the last time we did a group buy with him.. We had a $10 price increase per set during the year and he didn't confirm prices with me until he placed the order, so please just make note to your members we didn't increase pricing knowing he had already been paid for the order.

I am positive that you will get your mats from David. I'm not sure why he has no access to internet or what is happening but a similar situation happened in the last group buy and I had members contacting me about it, he came through in the end and supplied all the mats.

I will be advising David we won't be doing any more group buys for him though as for us it's not worth us having the chance that our name will be tarnished by people waiting on their mats. Even though at our end we received the order on the 10th of march for 6 sets of mats and had them out of here on the 18th which is more than acceptable on our behalf. Please let people know we do and are happy to supply direct to customers.

Regards,

Ashlee

. 1. Paul Bahry Nissan Skyline R34 Black 5 mats 'Skyline' Nissan Heelpad

2. 2. Simon Beckett Nissan Skyline R33 Black 5 mats 'Skyline' Nissan Heelpad -

3. 3. Steven Yudodihardjo Nissan S15 Black 4 mats 'Silvia' NO HEELPAD -

4. 4. Elias Haddad Subaru Impreza WRX Black 2 front mats 'WRX' NO HEELPAD NB ONE PIECE REAR -

5. 5. Jacky Ho Nissan Skyline R32 GTR Grafite 5 mats 'GTR logo' Nissan Heelpad -

6. 6. Isaac Insoll Nissan Skyline R33 Black 5 mats 'Skyline' Nissan Heelpad

This is a bit suprising as i though there would be more then 6 orders... lucky my order was on the list.

Edited by bob san

Just got mine.

I had ordered with a heelpad originally... Then late january i swapped for no heelpad. I posted in this thread and sent him an Email as well. Still got the heelpad.. So i've emailed matcraft to see if i can get a price for drivers mat only without a heelpad, we'll see how it goes :)

Mat's themselves are very nice quality. Looks so much better than the "multicolour" factory mats <3

Yeah I wanted to change and get no healpad as well, but did not bother saying anything to him because it would complicate things, Just heard the heal pads wear a way pretty quickly, so I have ordered a metal heal pad that screws through the carper to sit there. Which will match the GTR pedals if they come from Japan from the group buy lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...