Jump to content
SAU Community

Recommended Posts

95 25t

1. Twin dump pipe full maundrel bent system 3 inch turbo to tip

2. Turbosmart bleed @ 11 psi

3. K&N panel filter (hehe - 1kw)

Rest of the car stock.

How many kws would I have gained do u think?

Next on my list is hybrid fmic, then PowerFC. Hoping for close to 200rwkw

with all that plus good tuning... :bs!: ?

Link to comment
https://www.sau.com.au/forums/topic/35025-how-much-power-do-i-have-not-much/
Share on other sites

A power run should set you back arpund $40.

Woah! Is that all... Thought it would be at least $100. Anybody know a good dyno on Brisvegas northside?

Be pretty happy with 165rwkw, that would mean 30kw for $1300. Mmmm $1700 for hybrid fmic but i have nfi how much power gain from that maybe 10 rwkw? I've heard of peeps getting 20 rwkw's out of powerfc though, maybe another $1500 + tune. Should be near my goal then for about $3150.

Should I be looking @ stonger clutch before all this or will standard b ok up to 200 rwkws? Woops forgot a whiteline kit too didnt i...

Hey stop newby bashing u :flamer:

not heaps because with those sorts of mods the std ecu runs rich as we all know and have experienced. I reckon around 140 - 150 rwkw depending on dyno.

Your future mods sound good but I think when you get the power fc, thats when you can make the most of the mods u have.

well as a base idea for u. I got a 12/93 r33 gtst. When i dynoed it, it had a cat back 3 inch, pod filter with no air feed, and boost controller set on 13psi and i made 213rwhp(bout 160rwkw) u would be around that mark i would think. Give or take 10 kw

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I mean it's a bit late to say "This won't have any tangible effect and it is not worth spending more than about three seconds on it, please just enjoy the car" But I said it anyway. Does the pod actually get any airflow in that position behind a bumper like that?
    • Hey guys - apologies for digging this up. Has this website been shutdown or is the outage temporary?
    • So, went shopping at Just Jap for things that might work for the intake  After some trial fitting there I ended up with a 3" x 45° silicone bend, a 3" x 300mm alloy straight, and a humped joiner, some minor trimming will be required to shorten some of the stuff, but nothing that is beyond my "ham fisted" skills The guy at Just Jap was most helpful as we had all sorts of joiners,  bends and stuff out trial fitting  Laying it out above the stuff in there it seems everything will fit nicely, and looking at it, it is probably the way I should have been looking at doing it from the beginning, probably..... In the end it is a front bar off job anyway to remove the original stuff behind the front bar that is taking up the required realestate needed, so maybe a Thursday or Friday job And because I'm a hopeless consumer, I grabbed some new steel wheel nuts, the current ones are a spline drive type with a "security" socket, that somehow someone keeps misplacing, the new ones are a basic black steel 17mm hex socket In other news: I just did my "final" tax return, I am now officially a old retired veteran pensioner, and I'm milking the system for all it's worth,  life is good
    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
×
×
  • Create New...