Jump to content
SAU Community

Recommended Posts

Hi fellow Skyliners,

I have a R33 (1997 series 2 GTS25t) that's been unregistered since 2005 and it's been garaged all this time - it's been turned over and warmed up every weekend so it's all good in that aspect.

Now, what I want to know is, I plan to get it registered in the next few weeks and it requires a blue slip. It's relatively stock except for

* Frontmount Intercooler - installed properly with brackets

* A really quiet exhaust that it came from Japan with

* Set of 19 inch rims

* M-sport front bumper & 400R side skirts

* Rear seat removed - I want to register it as a two-seater.

I mean....it's still got the factory air induction box ffs !

Does anybody know of someone that does blue slips in western Sydney that's not so strict in regards to minor modifications ? I'll pay the extra few dollars for a blind mechanic if need be - if you know what I mean *wink* *wink* :)

Your help is much appreciated.

Edited by RBEE
Link to comment
https://www.sau.com.au/forums/topic/350303-blue-slip-in-sydney/
Share on other sites

where in sydney?

I'm also semi curious about this.. i'm kinda in the same boat... i've just been spending a fair bit of time returning some bits to stock but it still have some mods i dont want to bother changing.

where in sydney?

I'm also semi curious about this.. i'm kinda in the same boat... i've just been spending a fair bit of time returning some bits to stock but it still have some mods i dont want to bother changing.

I'm between Blacktown and Parramatta out west

I searched around a bit and got recommanded the following people

* Hami LPG - Blacktown - Some indian guy that really hates oil leaks but usually pass most things that arent too out-of-this-world

* Zec - Castlehill

* Eastern Creek Smash Repairs

Please let me know if anybody has had experience with any of these places in relations to blue slips....Thanks.

Thanks evil_weevil, I'll try those place next week and see what they say.

180_mph, seriously man, why wouldn't I post the easy-blue-slippers here ? Wouldn't it make life easier for others in the same boat as me ? Besides, blue slips aren't something that's needed everyday.

Plus it's extra business for the mechanic........so it's a win-win-win situation for all involved.

Gregor, at no stage did I mention the term 'dodgy' lol I said 'blind mechanic' just so that I'm not discriminating against the disabled LOL ;)

Edited by RBEE

180, evil-weevil is NOT stating that these two workshops are dodgy, just that they may be able to help obtain a blue slip. Both places are reputable, and I seriously doubt either one of them would risk their reputation and business licences for the sake of some clown with an extra $50-100 (or whatever) on top of the cost.

RBEE, if you really ARE looking for a dodgy/easy blue-slip, then asking for one on an online, public forum is pretty damned dumb.

Here's something that everyone should think about: if you manage to easily get a car back on the road with an even slightly dodgy blue or pink slip for your car, how many cars do you think this same place has passed for blue or pink slips that aren't even close to road-worthy?

This is why we have THIS thread: http://www.skylinesaustralia.com/forums/topic/228238-read-this-whos-the-best-tunerworkshopresprayerdetaileretc/

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...