Jump to content
SAU Community

Recommended Posts

Hey everyone,

last time i was at eastern creek i was told that the helmet i have is longer up to aussie standard and was told before i go back next time ill need a new one

now what i wana know is where in the wollongong/ sydney area is the best/ cheapest place to get motor sport helmets from?

Link to comment
https://www.sau.com.au/forums/topic/350304-helmets/
Share on other sites

http://bikegearwarehouse8-px.rtrk.com.au/mx-gear/Mens_Motorcross_Helmets

or goto your local bike shop...they always have specials

eg today i got my carbon/kevlar MX helmet for 150bucks

basic open face helmets can be had for 80bucks but they are heavy and..... well shit to be honest

Link to comment
https://www.sau.com.au/forums/topic/350304-helmets/#findComment-5624891
Share on other sites

Hey everyone,

last time i was at eastern creek i was told that the helmet i have is longer up to aussie standard and was told before i go back next time ill need a new one

now what i wana know is where in the wollongong/ sydney area is the best/ cheapest place to get motor sport helmets from?

Does it have as AS sticker on it? What brand/model and how old?

Link to comment
https://www.sau.com.au/forums/topic/350304-helmets/#findComment-5624919
Share on other sites

Does it have as AS sticker on it? What brand/model and how old?

+1, what standard is it that was knocked back?

CAMS helmet requirements are here: http://www.camsmanua...dule_G_Q111.pdf

importantly, it includes the following:

4.8 Moratoriums

(a) There is a moratorium on the implementation of any changes to apparel requirements, save for any identified and pressing safety related requirements which may arise or become evident, for non-international events, until 31 December 2012.

Link to comment
https://www.sau.com.au/forums/topic/350304-helmets/#findComment-5625306
Share on other sites

It's been like that for ages and It's all pretty clear on their website:

Helmet Standards approved for Race for Real Off-Street Meetings

Drivers Drivers of vehicles slower than 10.99-seconds (1/4 mile) are permitted to use any helmet (full-face or open- face) meeting one of the following Standards:

• SNELL SA2000, SA2005, SFI 31.2A (USA)

• SNELL M2000, M2005, SFI 41.2A (USA)

• BS 6658-1985

• AS/NZS 1698:2006 or AS/NZS 1698.

Link to comment
https://www.sau.com.au/forums/topic/350304-helmets/#findComment-5625690
Share on other sites

yeh i never knew that when i went up last time coz before that i had never had a problem and helmet is still in basically new condition.

but anyway im going to make a trip up to the place in auburn in the next week or so

Link to comment
https://www.sau.com.au/forums/topic/350304-helmets/#findComment-5625943
Share on other sites

  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Ironically the GTT was quite reliable in the 7 years of ownership. From memory I've only had to replace a radiator and coilpacks out of inconvenience 
    • Yes I can see how that would put you off HFM, especially with the price of good quality brake fluid. From what I understand it as you say the BM50 is the standard BMC for a R32 GTR, I must admit I would like to go far a Genuine Nissan BM57, but lack of cash prevents that at present. With the price being so close between the genuine BM50 and BM57 a BM57 New it seems a better choice as you gain that 1/16 bore size with the BM57, I would be interested in how much difference you feel with the BM57 fitted. I am going to take SteveL's advice in the short term and see how much actually comes out of that proportioning valve vent and save up for the Genuine Nissan part. Thanks for clarifying the HFM failure
    • Thanks mate. I just got the post inspection 1/2 done from state roads when the starter motor packed up, either that or the car alarm system is having trouble.  OEM part number 23300-AA112.
    • Hi, I though I was coming to an end in finding a replacement starter motor for a rb25de neo. I came across a starter motor from Taarks and a message below stating: Direct fit. 11 Tooth count. All below part numbers have been superseded to 11 teeth. Can some body shed some light on going from 8 teeth to 11 teeth apart from 36-month / 25,000 km warranty for passenger vehicles to 12 Month Warranty. Compatible with the following Nissan part numbers: 23300-20P00 23300-20P01 23300-20P05 23300-20P10 23300-20P11 23300-AA111 23300-AA112 23300-AA300 23300-08U10 23300-08U11 23300-08U15  
    • Low battery? Maybe check capacity? I know first-hand, on BMWs if your battery drops below 80% capacity, it starts causing strange issues.
×
×
  • Create New...