Jump to content
SAU Community

Recommended Posts

hi my name is robert.

i have a 97 s1 stagea. i have to repare the cv joints on the front drive shafts.

i know that they are the r33 gtr. I have a mate with some 32 gtr shafts but not shore if they are the same as 33gtr dose eney1 know?

also i have been told that rb26 intake can fit on the 25?

the same mate just got a 34gtr and is changing the frount brake set up. I would like to use the 34 brakes on the stagea but been told they will not fit?

also if the guy that has the books with all aftermarket parts can get back to me would be greatly appreciated

Link to comment
https://www.sau.com.au/forums/topic/350913-stagea/
Share on other sites

I have fitted R34GTT brakes front and rear on my S1 Stagea no problems. They bolt straight up. You need to trim the stone guard on the rear and pull the olives out of the lines - you'll see what I mean when you come to it. Not sure about the GTR brakes but I would think they fit as well. Are they Brembos?

Or join the Willwood group buy!!!!

Link to comment
https://www.sau.com.au/forums/topic/350913-stagea/#findComment-5631453
Share on other sites

yer they are brembos stock on a 34 gtr .

I have talked to just jap and they are 14 mm bolts and couse the stages run 33 gtst calipers they are 12 or 13 mm bolts

so drilling needed.

I have 18inch vip rims but changing to some work rims when i find out what they are called lol. I seen and like just not know the type yet.

also i found out from just jap that 32 and 33 gtr drive shafts are the same

Link to comment
https://www.sau.com.au/forums/topic/350913-stagea/#findComment-5632775
Share on other sites

Word up that's the best and easiest option, that said people on here still had dramas getting the cars idle and cold start ect to work right. As for info in w.a just stick to this site man I'm from Perth too and this is the best place for info!

Link to comment
https://www.sau.com.au/forums/topic/350913-stagea/#findComment-5634888
Share on other sites

yer i know.

all good just get a greddy

I have a JJ greddy copy. There is an excellent DIY in Skylines, by iX9.

If you go greddy PM me and I will tell you about a couple of tricks to make it easier,

Link to comment
https://www.sau.com.au/forums/topic/350913-stagea/#findComment-5635129
Share on other sites

yer will just do a greddy later. have a few other things to sort out first

i going to be running a heltech Platinum Sport 2000 ecu later as i have been told the stock is not that grate with its tune

and not like being modded.

i have a greddy on my vl as well was not to bad to fit

i selling the vl as well if eney 1 into

Edited by whitenight27
Link to comment
https://www.sau.com.au/forums/topic/350913-stagea/#findComment-5636162
Share on other sites

some mods i am wanting to do are

1, add a piggy back to the stock ecu

2, some coilovers

3, cams and new lifters as 1 or the other is worn

4, r34 gtr front end. have most parts when my mate changes his bits on his 34

5, bigger turbo must be in the stock spot thow.

6, some new coilpacks

7, brakes maby my mates 34 gtr when he upgrades

8, and rims. i have some in mind there work rims but not know the name

i have looked on some sights but no luck. i have found some that look similer they are fabulous profound rims

Link to comment
https://www.sau.com.au/forums/topic/350913-stagea/#findComment-5636182
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...