Jump to content
SAU Community

Recommended Posts

Hello everyone,

Dunno if this has been talked about before but i did a search but couldnt find the answer i'm looking for.

So, last year the drag race association here on the island joined IHRA and we got a lot of new rules and this year one of the new rules is that cars that are competing cant run with coolant that has glycol in it.

Is there any alternatives to coolant or any other types of coolant that doesnt have glycol in it? Because i dont really want to rely on just water to keep the engine temperature down.

Thanks in advance for the replies.

Take care

Link to comment
https://www.sau.com.au/forums/topic/351160-alternative-to-engine-coolant/
Share on other sites

HI mate, water cools better than glycol anyway, it absorbs more heat for it's volume.

We run straight distilled water in the race car with a corrosion inhibitor. Castrol make the inhibitor I use but I am sure there are other brands available.

If you find you still need more cooling capacity, we also use redline water wetter which made the car run about 5-10o cooler.

  • Like 1

I didnt know that water cools better than glycol, thats good to know. I had a look at the castrol corrosion inhibitor and the redline water wetter, both looks good. Gonna talk to my friends and see if they want to join in on a group buy so we can order some online.

Thanks for the reply Duncan.

BTW I should add that glycol does have a role....it adds the anti-freeze ability. When we are going to goulburn in winter we change back to coolant, the extra cooling isn't really important that time of year anyway

.

I just assumed that wasn't an issue for you in the caribeean but it might be for others reading :D

  • 2 weeks later...

HI mate, water cools better than glycol anyway, it absorbs more heat for it's volume.

We run straight distilled water in the race car with a corrosion inhibitor. Castrol make the inhibitor I use but I am sure there are other brands available.

If you find you still need more cooling capacity, we also use redline water wetter which made the car run about 5-10o cooler.

do u use the water wetter and corrosion inhibitor together?

like im asking if they are compatible together?

full bottle of each in each full colling system fill up?

i know that the redline water wetter has an inhibitor in it but prob not very much and and if your using de mineralised water i suppose it cant hurt to add the 200ml castrol inhibitor also?

I've never used them both together, when running the redline water wetter it has stuff in it already like you said. once again, i've never had a problem.

but be careful of sub 0 evenings...

BTW I should add that glycol does have a role....it adds the anti-freeze ability. When we are going to goulburn in winter we change back to coolant, the extra cooling isn't really important that time of year anyway

.

I just assumed that wasn't an issue for you in the caribeean but it might be for others reading :D

Yea, thats not gonna a be a issue here in the caribbean. A good thing too otherwise a lot of people would protest against this new rule.

yeah the whole point of so called 'coolant' is that it lowers the freezing point so your liquid doesn't freeze up at 0 degrees C. like dunc said it doeasn't really help much with the cooling capacity it does raise the boiling point a bit but under 0.9-1.3 bar pressure (depending on your cap seat pressure) water's boiling point is increased a fair bit anyway. that's what stops is boiling in your engine, the pressure. under 1 bar atmospheric pressure plus the added 1 bar system pressure pure water will boil only at about 120C.

lol well if my car even got close to those temps id be sorting out a better cooling system.

i have found both my r33s have pretty good factory cooling systems (not talking about oil)

no matter how hot the ambiant temp is or how long im being hard on them, the water temp is pretty stable.

genuine thermostat, a regular cooling system flush and retaining clutch fan probably have a bit to do with that though.

more horsepower and thermo fans and water instead of coolant will be the test in the near future when car is back on the track

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I should. But it already uses too much fuel for a daily. You might note my recco for engine chnages are almost exclusively to people who have it as a weekender/summer car. I don't even have room to keep the spares for this one, let alone another car.
    • If I had "perfect R33 GTR" kinda money I would have bought one of the crazy expensive low mileage HJA cars, but I am sadly not that wealthy. I already picked this car out of various Skylines for sale locally, most of which were worse in some way. Only a few cars were actually better but also more expensive. In terms of buying a motor locally, I at least have the option to inspect it myself and juding the seller as a person, and used or freshly rebuilt engines that some people sell are actually ok price-wise. I knew the car was going to require work, but shit piled up real fast and I haven't even driven 1000km yet as the turbo started oiling like a bitch within a few weeks after I got the car.   I assume it wasn't actually me who cracked it, though there is no way to know when that crack formed and if the previous owner even knew it was there. Buying another 05U Block can be a gamble, yeah, but the cheapest PRP cast block is like twice or more money-wise, and billet is 3 or 3 times as much. For now I am most likely just keeping the current engine, as a rebuild or engine swap isn't happening right now. But I am seriously considering buying a second engine and selling mine in return. Might be a sweet deal at the end.
    • Hi all. I need some help buying the correct size banjo bolts for my 2860 turbos. Because whoever installed them tore up the original part, I ordered new ones of this kind, because I just figured these were the most leak-resistant option as I already had trouble with a shitty braided line. I need to know the thread size of the smaller left hole, that is the turbo oil feed connection. I found out so far that the turbo oil inlet apparently has a 7/16"-24 thread, but I cannot find any listing or description of the thread size on this line. I do not have the original bolts. I tried using the bolts that were in the turbos (the ones that were mounted with the shitty braided line) but they sit very loosely so they can't be the right thread. Means either these bolts are the wrong ones (how do they fit the turbo then? no clue) or the wraparound-lines have a different thread than the turbo oil feed itself. Help is appreciated, asking Nissan directly is obviously not going to work.
    • EDIT: PSA to whoever stumbles upon this thread. It is in fact a crack in the block that caused this concern. Just letting you know. In my case, a few cm long hairline crack going horizontally above the turbo oil feed. Classic RB shit I guess
×
×
  • Create New...