Jump to content
SAU Community

Karbonetic Carbon Fibre Parts - 2012 Range Now In Stock!

Just Jap Racing
 Share

Recommended Posts

Just Jap Racing Grand Master

Just Jap Racing

Posted
Posted

Fresh into our Sydney superstore is the massive new range of Karbonetic Lightweight Carbon Fibre Doors, Bootlids, Spoilers, Lips and other hot Carbon accessories for all popular Japanese vehicles.

All Karbonetic items are manufactured to a very high standard, and unless otherwise stated are direct replacements for OEM parts.

With a huge number of Karbonetic products already in store, and loads more on the way, don't delay, get onto our website and check out the range yourself, or drop by our Sydney warehouse

Here are a few examples of our current stock - All of which is available for immediate pickup and delivery:

Karbonetic Carbon Fibre Coil Pack Cover - Mitsubishi Lancer EVO 4-8 (4G63T)

- Manufactured From Ultra Lightweight Carbon Fibre

- Direct Fit

- High Gloss Finish

- Superior Quality

- $119.00 + Freight

evocarbplugcover.jpg

Karbonetic Carbon Fibre Timing Belt Cover - Mitsubishi Lancer EVO 4-8 (4G63T)

- Manufactured From Ultra Lightweight Carbon Fibre

- Direct Fit

- High Gloss Finish

- Superior Quality

- $119.00 + Freight

evocarbcamgearcover.jpg

Karbonetic Carbon Fibre Timing Belt Cover - Nissan RB25DET

- Manufactured From Ultra Lightweight Carbon Fibre

- Direct Fit

- High Gloss Finish

- Superior Quality

- $125.00 + Freight

rb25carbtimingcover.jpg

Karbonetic Carbon Fibre Coil Pack Cover - Nissan RB25DET

- Manufactured From Ultra Lightweight Carbon Fibre

- Direct Fit

- High Gloss Finish

- Superior Quality

- $125.00 + Freight

rb25carbplugcover.jpg

Karbonetic Carbon Engine Cover Set - Nissan RB26DETT

- 2 Piece Set

- Timing Belt & Valley Cover Included

- Manufactured From Ultra Lightweight Carbon Fibre

- Less Than 0.5Kg (Both Pieces Combined)

- High Gloss Finish

- Superior Quality

- $299.00 + Freight

rb26carboncovers.jpg

Karbonetic Carbon Fibre OEM Rear Wing- Nissan Skyline R32 GTR

- Manufactured From Ultra Lightweight Carbon Fibre

- Weighs only 2.25kg (Significant Weight Saving Over Factory Item)

- Full Carbon Type

- Direct Replacement

- High Gloss Finish

- Superior Quality

- $499.00 + Freight

bnr32carbwing.jpg

Karbonetic JUN Style Carbon Fibre Front Lower Lip - Nissan Skyline R32 GTR

- Manufactured From Ultra Lightweight Carbon Fibre

- High Gloss Finish

- Superior Quality

- $399.00 + Freight

bnr32juncarblip.jpg

Karbonetic Carbon Fibre Front Grill - Nissan Skyline R32 GTR

- Manufactured From Ultra Lightweight Carbon Fibre

- High Gloss Finish

- Superior Quality

- $199.00 + Freight

bnr32carbgrill.jpg

Karbonetic Carbon Fibre Front Grill - Nissan Skyline R33 GTR

- Manufactured From Ultra Lightweight Carbon Fibre

- High Gloss Finish

- Superior Quality

- $199.00 + Freight

bcnr33carbgrill3.jpg

Karbonetic JUN Style Carbon Fibre Front Lower Lip - Nissan Skyline R33 GTR

- Manufactured From Ultra Lightweight Carbon Fibre

- High Gloss Finish

- Superior Quality

- $399.00 + Freight

bcnr33juncarblip.jpg

Karbonetic Carbon Fibre Fuse Box Cover - Nissan Skyline R33 GTR

- Manufactured From Ultra Lightweight Carbon Fibre

- High Gloss Finish

- Superior Quality

- $119.00 + Freight

bcnr33carbfuse.jpg

Karbonetic Carbon Centre Console Surround - Nissan S13

- Manufactured From Ultra Lightweight Carbon Fibre

- Simple Installation

- High Gloss Finish

- Superior Quality

- $109.00 + Freight

s13carbconsole.jpg

Karbonetic Carbon Bonnet Air Duct Set - Nissan R35 GTR

- Direct Replacement

- 2 Piece Set

- Super Lightweight Carbon Fibre

- High Gloss Finish

- Superior Quality

- $299.00 + Freight

r35vents.jpg

Karbonetic Carbon Fibre Engine Cover - Nissan R35 GTR (VR38DETT)

- Direct Replacement

- Super Lightweight Carbon Fibre

- High Gloss Finish

- Superior Quality

- $399.00 + Freight

r35carbengcover.jpg

Karbonetic Carbon Fibre Battery Cover - Nissan R35 GTR (VR38DETT)

- Direct Fit

- Super Lightweight Carbon Fibre

- High Gloss Finish

- Superior Quality

- $199.00 + Freight

r35carbbattcvr.jpg

Karbonetic Carbon Trunk - Nissan Skyline R32 GTR & R32 GTS-T Coupe

- Direct Replacement Boot Lid

- Lightweight Carbon Fibre

- Weight 5.5kg

- High Gloss Finish

- Superior Quality

- $650.00 + Freight

r32carbtrunk.jpg

Karbonetic Carbon Trunk - Nissan Skyline R33 GTR & R33 GTS-T Coupe

- Direct Replacement Boot Lid

- Lightweight Carbon Fibre

- Weight 4.5kg

- High Gloss Finish

- Superior Quality

- $650.00 + Freight

r33trunk.jpg

Karbonetic Carbon Trunk - Nissan Skyline R33 GTR & R33 GTS-T Coupe (Flush Type)

- Direct Replacement Boot Lid

- Lightweight Carbon Fibre

- Flush Fit Design

- Weight 6.0kg

- High Gloss Finish

- Superior Quality

- $699.00 + Freight

karbr33flushboot.jpg

Karbonetic Carbon Trunk - Nissan Skyline R34 GTR & R34 GTT Coupe

- Direct Replacement Boot Lid

- Lightweight Carbon Fibre

- High Gloss Finish

- Superior Quality

- $650.00 + Freight

r34trunk.jpg

Karbonetic Carbon Trunk - Nissan R35 GTR

- Direct Replacement Boot Lid

- Lightweight Carbon Fibre

- Weight 4.5kg

- Includes Factory Rear Wing Mounting Holes

- High Gloss Finish

- Superior Quality

- $1099.00 + Freight

r35trunk.jpg

Karbonetic Time Attack Dry Carbon Doors - Nissan R35 GTR

- Direct Replacement Bare Doors

- Driver & Passenger Door Included

- Full Dry Carbon Construction

- Extreme Lightweight

- Individual Door Weight: 4kg (8kg Combined)

- OEM Door Weight: 9.6kg (19.20kg Combined)

- Superior Quality

- Designed For Race Use

- $3999.00 + Freight (Left & Right Set)

35drydoor1.jpg

Karbonetic Carbon Trunk - Nissan S13 Silvia

- Direct Replacement Boot Lid

- Lightweight Carbon Fibre

- High Gloss Finish

- Superior Quality

- $650.00 + Freight

s13trunk.jpg

Karbonetic Time Attack Carbon Fibre Doors - Nissan S13, S15 & Skyline R32 GTS-T & GTR, and R34 GTT & GTR

- Direct Replacement

- Lightweight Carbon Fibre

- High Gloss Finish

- Superior Quality

- Designed For Race Use

- From $1499.00 Per Pair + Freight

s13carbdoor1.jpg

s13carbdoor2.jpg

Karbonetic Carbon Trunk - Nissan S14 200SX

- Direct Replacement Boot Lid

- Lightweight Carbon Fibre

- Weight 6.0kg

- High Gloss Finish

- Superior Quality

- $650.00 + Freight

s14trunk.jpg

Karbonetic Carbon Trunk - Nissan S15 200SX

- Direct Replacement Boot Lid

- Lightweight Carbon Fibre

- High Gloss Finish

- Superior Quality

- $650.00 + Freight

s15trunk.jpg

Karbonetic Carbon Trunk - Subaru Impreza WRX GDB

- Direct Replacement Boot Lid

- Lightweight Carbon Fibre

- High Gloss Finish

- Superior Quality

- $650.00 + Freight

karbwrxgdbboot.jpg

Karbonetic Carbon Trunk - Mitsubishi Lancer EVO X CZ4A

- Direct Replacement Boot Lid

- Lightweight Carbon Fibre

- Weight 5.1kg

- High Gloss Finish

- Superior Quality

- $899.00 + Freight

evo10trunk2.jpg

Karbonetic Carbon Trunk - Mitsubishi Lancer EVO 7/8/9 CT9A

- Direct Replacement Boot Lid

- Lightweight Carbon Fibre

- High Gloss Finish

- Superior Quality

evo7trunk2.jpg

evo7trunkfitted.jpg

HOW CAN YOU PLACE YOUR ORDER?

The answer is simple!

Checkout our massive new range of Carbon Fibre parts and accessories from Karbonetic and purchase online 24/7 at http://www.justjap.com for fast Australia-wide delivery, or simply drop by and check them out in the flesh!

With Australia's biggest range of High Performance Japanese Parts all under one roof, and all available online, purchasing your tuning parts online couldn't be easier!

Please contact our sales team if you have any questions, or reply here

Link to comment
Share on other sites
tangomatt Proficient

tangomatt

Posted
Posted

Hi Just Jap staff,

I have been wanting to buy carbon boot lid for my BNR34 for a while, but I have a few concerns/qualms about fitting a carbon trunk lid. I was wondering if you could clarify these as it would help me decide whether to take the plunge and just get one!

1, The overall fit of the carbon trunk in terms of panel gaps, alignment with rear quarter panels, OEM rear bumper; and ease of fitting OEM high mount stop light; lock barrel and latch.

2, Can OEM spoiler be mounted and if so would additional bracing needs to be custom fabricated to prevent spoiler being ripped off at high speeds? Or is the carbon trunk be strong enough to support the OEM spoiler by itself? How hard is it drill the holes for the OEM spoiler? (Can a panel shop handle such a job)

3, Is there any gurantee policy on the finish and fitment of the carbon trunk? That is what if one was ordered and the fitment ended up sub- standard?

The reason for all these questions is because I imported a carbon spoiler from Japan a while back and the fitment was so poor I ended up not installing it altogether, and to date it is still sitting in my garage collecting dust!

Love to hear from you abut this

Link to comment
Share on other sites
Just Jap Racing Grand Master

Just Jap Racing

Posted
  • Author
Posted

Hi Just Jap staff,

I have been wanting to buy carbon boot lid for my BNR34 for a while, but I have a few concerns/qualms about fitting a carbon trunk lid. I was wondering if you could clarify these as it would help me decide whether to take the plunge and just get one!

1, The overall fit of the carbon trunk in terms of panel gaps, alignment with rear quarter panels, OEM rear bumper; and ease of fitting OEM high mount stop light; lock barrel and latch.

2, Can OEM spoiler be mounted and if so would additional bracing needs to be custom fabricated to prevent spoiler being ripped off at high speeds? Or is the carbon trunk be strong enough to support the OEM spoiler by itself? How hard is it drill the holes for the OEM spoiler? (Can a panel shop handle such a job)

3, Is there any gurantee policy on the finish and fitment of the carbon trunk? That is what if one was ordered and the fitment ended up sub- standard?

The reason for all these questions is because I imported a carbon spoiler from Japan a while back and the fitment was so poor I ended up not installing it altogether, and to date it is still sitting in my garage collecting dust!

Love to hear from you abut this

Hi Matt,

Thanks for your query - Let me see if I can address your questions.

1. As with almost all Carbon Fibre aftermarket parts on the market, fit quality is generally good however if you are looking for absolute perfection, you may struggle with anything short of a $2000 dry carbon unit, and even then some adjustments are often required to obtain a spot on fit. I am aware of your car and know you are quite picky so what I will try and do is check with the boys if we have fitted one in house for a customer, and if so, see if I can track down some photos. That said, we have sold a number of them to customers and had no complaints. Normally I would say bring your car in and test fit one and see how you like it but short of you driving up from Melbourne that would be a tall order!

2. The R34 Coupe Carbon Bootlid is designed to be wingless, and therefore it does not have the provision for reattaching your factory wing. It may be possible to drill it yourself to suit, however we don't advise doing so as there is potential to damage the boot itself. Furthermore, we would also recommend that if you are attaching any large wing to a Carbon Boot, that bracing be added underneath for strength and piece of mind. As for weather or not a panel shop can handle such a task, im sure you can appreciate we can't answer that, and it really depends on which panel shop you went to. The Boot Lid itself is designed to accomodate your factory brake light and boot latch/release mechanism.

3. The finish on the Wet Carbon Boot Lid's is high gloss, so if you receive one and find a serious fault in the finish/scratch/s or damage, we will cover it under warranty.

I hope this clarifies - Please give me a call in the store direct if you would like to discuss further on (02) 9545 0532.

Cheers,

Steve

Link to comment
Share on other sites
bigmikespec Veteran

bigmikespec

Posted
Posted

Regarding the carbon fibre parts.

Are the boot lids, doors, bonnets etc made from 100% carbon or is it a fibreglass structure skinned with carbon fibre material. Looking at the carbon doors for the R35 they appear to be 100% carbon hence the price whereas the doors for R33/R34 are much cheaper.

Thanks

Link to comment
Share on other sites
Just Jap Racing Grand Master

Just Jap Racing

Posted
  • Author
Posted

Regarding the carbon fibre parts.

Are the boot lids, doors, bonnets etc made from 100% carbon or is it a fibreglass structure skinned with carbon fibre material. Looking at the carbon doors for the R35 they appear to be 100% carbon hence the price whereas the doors for R33/R34 are much cheaper.

Thanks

Hi mate,

We stock a variety of both Wet and Dry Carbon products. All parts are Wet Carbon (Carbon with Fibreglass re-inforcement) unless otherwise stated or labelled as Dry Carbon.

At this stage the only doors we are stocking in Dry Carbon are R35, however we expect to be extending the range within the coming months.

Regards,

Steve

Link to comment
Share on other sites
  • 1 month later...
Just Jap Racing Grand Master

Just Jap Racing

Posted
  • Author
Posted

Do u guys have any Carbon bonnets for the Series 1 R33 GTS-T ? Looked on ur website & only seems u have them for the series 2 models . Would buy one off u guys if u have them for the Series1 . Cheers Josh

Hi Josh,

We are hoping to have some in the near future but at this time we only have stock for ECR33 Series II im afraid.

Regards,

Steve

Link to comment
Share on other sites
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Rezz
      Japan Scrapbook

      By Rezz · Posted

      Inside and outside ESCON Field in Sapporo in Hokkaido
    • 13btLUCE
      R34 awd issue

      By 13btLUCE · Posted

      Gday gents, been having a issue for a little while now and have come for some advice. car is a r34 gt-four (awd na sedan), when taking tight corners such as car parks and roundabouts feels as if the diff is locked on both ends, have literally snapped 3 shafts and issues doing my head in. Car has 60k klm so mechanical failure in the diff is unlikely but possible, been to 2 very reputable shops near where I live and both have had no luck. What would be my process of trying to find the cause? not too interested in pulling apart transfer cases just to find nothing, have these cars come out with electronic BS that might cause this? not too mechanically inclined so any information will probably be passed on an expert thanks in advance 
    • silviaz
      r34 GTT Excessive fuel consumption on stock Rb25det neo

      By silviaz · Posted

      Ah right.
    • Rezz
      New topic :0... Japan members what do you drive currently?

      By Rezz · Posted

      I realise that perhaps no one will in Japan will see this, but why not try anyway. What are you driving in Japan? I have a (sniff (;_;) ) 2018 Toyota Corolla Sports 1.2L Turbo 6MT. It has a class trailing 116PS and 190Nm power/torque... 😐 Why? Because back in 2018 there was only 1(?) manual transmission car available from Toyota which was the 86 (not including the Mark X GRMN 2015/2019), so when they released this one I had to support them by getting one in the hope that they would continue to release more manual models. As it turns out they released the Supra, Yaris, and GR Corolla all with manual transmissons after that. Mods are RSR Ti2000 Down springs, HKS panel filter, 18x8.5" Weds Sports SA-20R Face F with 215/40R18 Toyota Proxes Sport tyres. Eventually a full exhaust, boost controller sub-con, Blitz turbocharger and aero parts will be added before it gets replaced... 
    • Rezz
      R32 Nostalgia

      By Rezz · Posted

      It looks proper factory fitted. It's exactly how I would do it. Well done 👍
×
×
  • Create New...