Jump to content
SAU Community

R34 Gt Coupe Build

notavailable
 Share

Recommended Posts

notavailable Rookie

notavailable

Posted
Posted

I just picked up a GT Coupe NON turbo for $5500, I know a bargain, well it was my cousin who sold it to me. The engine is in "pretty good" condition, it's not exactly immaculate. it runs but there are several oil leaks and it needs a ring change as per the mechanics saying. I'm thinking about putting an RB26 in. What would it take? I know I have to guy the engine but after that, do I have to do modifications to the chassis or just bolt in. How do I hook it up to the drive shaft. I know I'm a noob but if I'm doing a swap then why not the RB. By the way what about the RTA, do I have to notify them or something. Is this even legal to do. Do I have to get the car reinspected by blue slip. What about cops won't they ask why it's a RB26 not the stock engine, even if I tell the RTA? Please guys the engine in this thing is ****ed up, it runs but my mechanic said change it, the cracks in the sump are too expensive and not worth it.

Link to comment
https://www.sau.com.au/forums/topic/351707-r34-gt-coupe-build/
Share on other sites
StealthX Veteran

StealthX

Posted
Posted

Prepare yourself for alot of money and a fair bit of headfarking.

RB26 in good condition: $4,000 - $4,500.

Custom sump (without diff): $500

Installation labor: $1,000 - $1,200

Then prepare yourself for blown turbo town, most rb26's turbos are getting on, and it'd be a wise move for the sake fo your engine to swap to a single or get new -5s (GT2860) within the next 6 months.

You'll have to notify the RTA, I don't know about eastern states laws, but you'll def need an inspection of some sort. You wouldn't wanna risk it, You'd barely last a few weeks judging by the rate that skylines get hassled on the roads, and they'd take one peek in your engine bay and see that it's not stock...

Bronx Mentor

Bronx

Posted
Posted

+ electronics, ecu etc??? i needed all those parts when i did my conversion. also exhaust would needa be redone, dont know if you still need to modify your brakes either if you put a higher performance engine into your car, the non turbo brakes are so small you can barely stop a horse with them.....

engineers report or certificate???

also are you still allowed to put an older motor in a newer car??? somewhere i read about that, or was that just for compliance??

syfon Veteran

syfon

Posted
Posted

a copper aint going to look your vehicle record and see that it is a non-turbo, or and RB26 bla bla bla.

They will seach your plates and see "Nissan Skyline", nothing else. A police officer is not going to be able to tell that your car is a factory non-turbo just by looking at the vehicle record, nor will they be able to tell the difference between and RB26 and an RB25 non-turbo, expect for the few police officer's who may have some mechanical knowledge....

mad082 Grand Master

mad082

Posted
Posted

don't forget a turbo gearbox (unless the r34 natro boxes are stronger than the r33 natro boxes), brake upgrade (if needed), LSD.

yes you need to notify the transport department. you may possibly need it blue plated.

to be honest, for what it will cost you to do it you could sell the natro, buy a turbo 34 and do mods to it and be making more power than a stock 26.

notavailable Rookie

notavailable

Posted
  • Author
Posted

That's not the point, a built Civic might too but I loath civics lol. The point is the RB26 has more potential and is bigger. I mean why bother with an RB25. The 26 STOCK is BETTER. It's just the way it is. Now I could build a RWD GT-R here, yeh its not going to be a GTR but I never said it was. It's an RB26 Skyline RWD. I'll even put the GTR body kit and fenders to give it that look.

Anyways so what should I do at first, ask the RTA or build the car then go. Is it the RTA or the transport department or are they the same which you're talking about. By the way when cops look they don't see a Skyline GTR they see skyline so he's going to harass me, naturally as he is a useless loser. But anyways be that as it may I don't want trouble. So what should I do first for those who have done. What did you guys do?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...