Jump to content
SAU Community

Gtr Transport To Philip Island?

druzilla32

By druzilla32,
in R35 GTR

 Share

Recommended Posts

fungoolie Community Regular

fungoolie

Posted
Posted

Hi Guys,

can anyone recommend reliable car transport for my r35 to get to philip island?

I dont want some incompetent schmuck scratching every panel before it arrives.

If this is for the Nissan Drive days in March I know that the dealers are offering transport to PI so hopefully their regular carriers would know how to take enough care with your car.

SlipR35 Enthusiast

SlipR35

Posted
Posted

If this is for the Nissan Drive days in March I know that the dealers are offering transport to PI so hopefully their regular carriers would know how to take enough care with your car.

Fungoolie, where did you hear that Nissan are offering transport? Not the case in SA.

Slip.

handbrake Veteran

handbrake

Posted
Posted (edited)

transport not offered in Qld either as Drew has mentioned.

I passed on the offer. Look at the schedule, long way to haul the car form here with very little track time.

If I am going to take the car down, it would be for a couple of weeks and several days at a few different tracks, not a few sessions in an afternoon at one.

Edited by handbrake
druzilla32 Mentor

druzilla32

Posted
  • Author
Posted

thanks for the comments.

yeah CEVA was actually one that I am waiting on a quote for.

However like mark said , it is a fair but of stuffing around for so little track time so i think i will pass on this too.

nissan should handle the transport so we can just relax and actually enjoy ourselves.

fungoolie Community Regular

fungoolie

Posted
Posted (edited)

Fungoolie, where did you hear that Nissan are offering transport? Not the case in SA.

Slip.

Hi Slip,

Can't remember the guys name but when he came out to tell me if I'd won one of the spots he said that if I needed transport of the car he could arrange it through their own carrier. I was in front of Ziad when he said it. I ended up opting for Program 2 in the end.

Also have a look at the attachment.

Look 5 lines down in the overview. Bit ambiguous I know but implies that they will do it but at your cost. It's almost saying you HAVE to do it through them!

My thoughts went along the same lines as Handbrake in the end. It's not really a 2 day event, just from 4PM to 4PM and track time is minimal..... Plus on top of that you have to go through the whole rigmarole of pre and post track day inspections etc etc. If I'm going to drive PI I'd prefer to do a PIARC 2 day sprint event only costing $340 for the two days with heaps more track time and it's not during the working week.....

post-61477-0-15173300-1296791570_thumb.jpg

Edited by fungoolie
  • Like 1
handbrake Veteran

handbrake

Posted
Posted (edited)

I know the Nissan boys do read this forum so I will say that I think they have done the right thing by listening to their customers and trying to organise one of these track days at a place like PI but I would need more time on the circuit than the schedule offered to make me consider it worthwhile, especially coming from interstate.

Edited by handbrake
SlipR35 Enthusiast

SlipR35

Posted
Posted

Hi Slip,

Can't remember the guys name but when he came out to tell me if I'd won one of the spots he said that if I needed transport of the car he could arrange it through their own carrier. I was in front of Ziad when he said it. I ended up opting for Program 2 in the end.

Also have a look at the attachment.

Look 5 lines down in the overview. Bit ambiguous I know but implies that they will do it but at your cost. It's almost saying you HAVE to do it through them!

My thoughts went along the same lines as Handbrake in the end. It's not really a 2 day event, just from 4PM to 4PM and track time is minimal..... Plus on top of that you have to go through the whole rigmarole of pre and post track day inspections etc etc. If I'm going to drive PI I'd prefer to do a PIARC 2 day sprint event only costing $340 for the two days with heaps more track time and it's not during the working week.....

Thanks Mate,

Hadn't seen that attachment. If you're around tomorrow come out to Martin's in the arvo to catch up and have a chat.

Cheers

Slip.

RCCC Enthusiast

RCCC

Posted
Posted

Why can't they organise one in Eastern Creek?

I know the Nissan boys do read this forum so I will say that I think they have done the right thing by listening to their customers and trying to organise one of these track days at a place like PI but I would need more time on the circuit than the schedule offered to make me consider it worthwhile, especially coming from interstate.

SS8_Gohan Grand Master

SS8_Gohan

Posted
Posted

I would recommend CEVA.

They had a number of new Porsches at their Melbourne depot, they take photos of the car and note all damage in front of you when you drop it off.

yeah, unless you point the damage out to them - don't go CEVA

they don't take photos either

fungoolie Community Regular

fungoolie

Posted
Posted (edited)

Thanks Mate,

Hadn't seen that attachment. If you're around tomorrow come out to Martin's in the arvo to catch up and have a chat.

Cheers

Slip.

Would've liked to come out to Martin's today but had to load in and set up for our gig at the Highlander tonight. I will make it soon though! I currently have next weekend off.

Cheers

David

Edited by fungoolie
OzStriker Enthusiast

OzStriker

Posted
Posted

yeah, unless you point the damage out to them - don't go CEVA

they don't take photos either

On the day, I watched them thoroughly look over and record two cars before our they did our car and transported it to Perth.

The car arrived in Perth very quickly and I will happily use CEVA again.

Beer Baron Grand Master

Beer Baron

Posted
Posted

well having personally used ceva I would advise to ummmm look elsewhere. my own personal experience is they DID NOT take pictures of the car (I did though) when it was received at their depot, there were other issues too but suffice to say that I would be seeking an alternate arrangement to transport any car of mine in the future. I had previously had plenty of people recommend them but after what I witnessed and what occurred in my case I will not be going back there. The stories told to me by a staff member at the depot certainly didn't fill me with confidence either.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      "Cheap" bolt on turbo on RB25DET NEO

      By Kapr · Posted

      You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
    • Watermouse
      "Cheap" bolt on turbo on RB25DET NEO

      By Watermouse · Posted

      https://www.facebook.com/share/19kSVAc4tc/?mibextid=wwXIfr
    • Kinkstaah
      Airbox for +T

      By Kinkstaah · Posted

      It would be well worth deciding where you want to go and what you care about. Reliability of everything in a 34 drops MASSIVELY above the 300kw mark. Keeping everything going great at beyond that value will cost ten times the $. Clutches become shit, gearboxes (and engines/bottom ends) become consumable, traction becomes crap. The good news is looking legalish/actually being legal is slighly under the 300kw mark. I would make the assumption you want to ditch the stock plenum too and want to go a front facing unit of some description due to the cross flow. Do the bends on a return flow hurt? Not really. A couple of bends do make a difference but not nearly as much in a forced induction situation. Add 1psi of boost to overcome it. Nobody has ever gone and done a track session monitoring IAT then done a different session on a different intercooler and monitored IAT to see the difference here. All of the benefits here are likely in the "My engine is a forged consumable that I drive once a year because it needs a rebuild every year which takes 9 months of the year to complete" territory. It would be well worth deciding where you want to go and what you care about with this car.
    • GTSBoy
      Airbox for +T

      By GTSBoy · Posted

      By "reverse flow", do you mean "return flow"? Being the IC having a return pipe back behind the bumper reo, or similar? If so... I am currently making ~250 rwkW on a Neo at ~17-18 psi. With a return flow. There's nothing to indicate that it is costing me a lot of power at this level, and I would be surprised if I could not push it harder. True, I have not measured pressure drop across it or IAT changes, but the car does not seem upset about it in any way. I won't be bothering to look into it unless it starts giving trouble or doesn't respond to boost increases when I next put it on the dyno. FWIW, it was tuned with the boost controller off, so achieving ~15-16 psi on the wastegate spring alone, and it is noticeably quicker with the boost controller on and yielding a couple of extra pounds. Hence why I think it is doing OK. So, no, I would not arbitrarily say that return flows are restrictive. Yes, they are certainly restrictive if you're aiming for higher power levels. But I also think that the happy place for a street car is <300 rwkW anyway, so I'm not going to be aiming for power levels that would require me to change the inlet pipework. My car looks very stock, even though everything is different. The turbo and inlet pipes all look stock and run in the stock locations, The airbox looks stock (apart from the inlet being opened up). The turbo looks stock, because it's in the stock location, is the stock housings and can't really be seen anyway. It makes enough power to be good to drive, but won't raise eyebrows if I ever f**k up enough for the cops to lift the bonnet.
    • BuiltNotBought
      Airbox for +T

      By BuiltNotBought · Posted

      There is a guy who said he can weld me piping without having to cut chassis, maybe I do that ? Or do I just go reverse flow but isn’t reverse flow very limited once again? 
×
×
  • Create New...