Jump to content
SAU Community

Recommended Posts

here we go again!!!!!!!!!!!!!!!:rolleyes:

Andy Kuc (pronounce KUTZ) @ Pro Automotive

or Nick Summers @ GT garage....

only 2 people to talk to, both know RB's inside and out!!!

I use Andy, but only because he's been a good mate for 15 plus year's..

Cheers Jon

Hey guys just wonderin who everyone thinks is the best tuner in TAS I have nearly finish my 26/30 build and want to know who I shoul get to tune it

what does your 26/30 consist of?

stock bottom end with a 26 head?

forged bottom end, big cams and port job?

anyone that tunes can get an engine running,

its the ones in the know that can get the most out of it

what does your 26/30 consist of?

stock bottom end with a 26 head?

forged bottom end, big cams and port job?

anyone that tunes can get an engine running,

its the ones in the know that can get the most out of it

hey mate this is whats getting done/has already

T04r top mount turbo

blitz 660cc injectors

straight throught 3" exhaust

apexi afc neo piggy back ecu

bosch 040

malpassi fuel pressure reg

piping kit

everything else pretty much stan dard

Mods i am in the process of doing/building

upgrading to bosch 044 with surge tank

mahle pistons and rings

forged h beam conrods

ported head

sump adaptor

rb30 bottomend bored .040 acid didpped and all that

ross harmonic balancer

apexi power fc djetro

crank balanced and all that

race bearings

arp head studs

cosmetic head gasket

Unless you have an immac tidy setup & have excess money OR are already chummy with Kutz, as a random off the street you'd be far better off at GT.

Summers is a top bloke, does exactly what you want and does it well for a decent price. Won’t turn his nose up at backyard jobs and doesn’t have a superiority complex like certain other tuners seem to... He also isnt scared to push a car a bit closer to the limits it was built to handle (on request).

I’ve only ever had and heard of good experiences, which I definitely couldn’t say about many other places in TAS…

*zips up flame suit, rests back and cracks open a can*

Unless you have an immac tidy setup & have excess money OR are already chummy with Kutz, as a random off the street you'd be far better off at GT.

Summers is a top bloke, does exactly what you want and does it well for a decent price. Won't turn his nose up at backyard jobs and doesn't have a superiority complex like certain other tuners seem to...

These are exactly the reasons I choose GT Garage over pro automotive.

Andy does awesome work, but so do Nick and Ben plus they are just friendlier blokes.

Cheers yea I went to gt before and they were grate just wondered if there was anyone closer to launnie but don't mind the drive anyway

there is boost automotive in launceston, but i'd avoid them like the plague

not all bad storys from them, but enough that you don't want to take your chances (plus he will try and sell you a haltech for $1,000,000)

there is boost automotive in launceston, but i'd avoid them like the plague

not all bad storys from them, but enough that you don't want to take your chances (plus he will try and sell you a haltech for $1,000,000)

yea i did go through him once with my old ecu but he chargeder a fortuen and my car wouldnt even start was just shit really

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...