Jump to content
SAU Community

Recommended Posts

  • 3 months later...

I have to update this for Steve, as Im just as excited as he is. Big props to Powertune and everyone else involved, but we were out testing yesterday (His our again today), and what an awesome shakedown. I wont post any times or details, ill let Steve do that, but here is a pic

9949619036_937517b5d5_c.jpg

1264143_711606702186289_1555694663_o.jpg

So after the cage getting painted the engine and gearbox was dropped off for installation in March. Work up until this point was faultless. I was quoted 4 weeks until completion.

April....... Wife cancer

May........Kid sick

June...... Kid not his

July.... Separated from wife

August.... Bikies after him

September... Bikies poured sulphuric acid on his hair and my legs were broken

I genuinely felt sorry for the cnut. I have succumbed to the fact that he is mentally not there. Through my observations and from my opinion (medically based) he is a compulsive liar (only the seperation part is true) which makes it very hard to deal with. Just check out his trader thread. That has only unravelled the tip of the iceberg...believe me! . I'm not here to discredit his business even though he has cost me tens of thousands through missing parts, engine failure due to poor workmanship.

So lets move on to the awesome part ;)

I had to goto the workshop to hijack my own car with a few mates unannounced. As I have a car to prep for wtac ;p

VSPORT next stop... Brakes, suspension, dry sump sorted! Superb efforts there from Todd and Johnny

POWERTUNE to finish the car for testing.... Fcking awesome gig they run there! They do everything!!!

HALTECH - so generous with time and support and such a awesome product when understood

Justin from PROWIRE who wired the whole car up without fault on the first start!!! Drops panties bro lol

Anyway.... Shakedown was frigging awesome. Could not fault the car mechanically. Haltech setup my whole data logging trackside and once again there efforts are above and beyond.

I destroyed my front left canard yesterday collecting a witches hat under lock up but I'm still getting over the novelty of clutchless shifting :P

Boz doing what he does at TRACKSCHOOL tested the car............. Video to come .......

I can't believe it's this quick out of the box so early in its testing without any aero and on its run in tune.... And weighing in at 1420kg :P

post-31999-0-69596700-1380324901_thumb.jpg

post-31999-0-99374800-1380324915_thumb.jpg

post-31999-0-96143200-1380325874_thumb.jpg

Ur "mate" did the dash I think haha

That's right.... ur mate that sent away ur exact brakes lol

just alloy wrapped in carbon.

Shifter is a custom made extension by powertune on a pivot to give the exact same consistent throw to the holinger plus signal to the Motorsport systems strain gauge shifter. It also gives the driver a back and forward feel.... vs the easy dog leg option which gives inconsistent and weird angles of thow. All this because the seat position is at the passengers rear foot rest ;)

Mouth watering for sure!

Big novelty for me at the moment pulling that big knob...all I'm thinking of is getting to sixth and bleeping the throttle on downshifts on the peddle box. Until I'm comfortable with that ill start zoning in on my lap times :P

Car is looking awesome. Can't wait to see some shakedown vids and the car out at WTAC!

Who was this in refernce to?

So after the cage getting painted the engine and gearbox was dropped off for installation in March. Work up until this point was faultless. I was quoted 4 weeks until completion.

April....... Wife cancer
May........Kid sick
June...... Kid not his
July.... Separated from wife
August.... Bikies after him
September... Bikies poured sulphuric acid on his hair and my legs were broken

I genuinely felt sorry for the cnut. I have succumbed to the fact that he is mentally not there. Through my observations and from my opinion (medically based) he is a compulsive liar (only the seperation part is true) which makes it very hard to deal with. Just check out his trader thread. That has only unravelled the tip of the iceberg...believe me! . I'm not here to discredit his business even though he has cost me tens of thousands through missing parts, engine failure due to poor workmanship.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...