Jump to content
SAU Community

Recommended Posts

Hi Everyone,

Its time for our annual Dyno Day. if you would like to participate please put your entry through sooner than later.

We got (from memory) 44 cars last year and had to turn down about 10 so there is a limit on how many we can do.

It is a 4WD dyno so all types (FWD, RWD or 4WD) are welcome. For the R34 GTRs I know you will need to remove the rear diffuser.

(9th Feb 2011) There are 15 spots out of the 40ish max taken already, so be quick.

Previous Pics: http://www.gtcarclub.com/Resources/!events/20090719DynoDay/index.html

20110319_Annual_Dyno_Day_Flyer.jpg

Link to comment
https://www.sau.com.au/forums/topic/353321-19th-march-2011-gtcc-dyno-day/
Share on other sites

Hey Gents

Yah I know it is near Knox. Seriously even when I had my R33 GT-R I never had any issues @ Knox and I was there every 2nd day but I am not saying you guys won't/don't.

VCM Suite is on Ferntree Gully Rd so you do not need to pass Knox.

You guys don't realise but Pettite probably surfs these forums regularly and if you state you are trying to avoid Knox the more effort he will make it to come down :)

Sorry guys I cannot gurantee what I have no control over but the last 2 times we have been there, not a cop in sight.

Hope you guys still decide to come down if not to Dyno, for a look see.

Regards

B

PS: Sorry didn't know it was on the same day as DECA.

PS2: Thanks to those who have already paid.

  • 2 weeks later...

Are there any more spots?

I have never been to one of these so what the procedure/format of these event? Do your cars have to be modified or anything or just anyone with preferably skylines involved?

Age limit? (lol) I am an oldie (45)

Regards

Dazza

Are there any more spots?

I have never been to one of these so what the procedure/format of these event? Do your cars have to be modified or anything or just anyone with preferably skylines involved?

Age limit? (lol) I am an oldie (45)

Regards

Dazza

Spoke to Brandon last week, said there is still spots so quick get in :)

Can be any car, stock or modified hell my GTR is stock as a rock and going on :D

No age limit!

Thanks for the reply Leigh

Yes guys, your car does not need to modified or expected to deliver large amounts of HP or Kws.

Some people use it as a comparison when they are about to do Mods, since we try and do a Dyno day every 12mths, they can then compare what sort of performance difference their mods have made.

Others just like to be able to analyse their power curve.

Others just like to participate and check out the different cars.

Im Surprised but we still have spots left.

Thanks

Bran

Hi Guys,

We still have some spots left.

I will be emailing the timetables on Thursday sorry but I need to sit down and work it all out :)

Some people can only make it in the mornings etc etc

Even if you are not dynoing your car please feel free to pop by grab a bite take some pics and mingle.

Thanks

Bran

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...