Jump to content
SAU Community

Recommended Posts

  • 3 weeks later...
I think Rezz can get them?

i too am looking at the ganador mirrors for a R32 GTR...i found 2 places that sell them

takakaira - normal ones unpainted 35000 yen about $436 plus tax which = ??

2. carbon ones 57000 yen $710 plus tax freight...?

from http://www.perfectrun.com.au/real_size_ima...raeromirror.htm

with 15 per cent discount.... normal $ 505 plus freight

carbon $710 plus freight...

Either way they seem abit much ... cany anyone get them for a better price?

Also i have a friend going to japan around june-july'ish can these be found in your local autobrac's and will they be cheaper?

any thoughts appreciated

Link to comment
https://www.sau.com.au/forums/topic/35337-ganador-mirrors/#findComment-731404
Share on other sites

I only get the East Bear or Nick's ones... they're smaller than Ganadors, but more expensive.

would you be interested in sourcing a set and sending them down..?

for a R32 GTR...DaiOni said the normal ones are around 30000 yen...How much would they be sent to melbourne? if your interested in chasing it up...

R32 GTR ganador aero mirrors....

cheers

Link to comment
https://www.sau.com.au/forums/topic/35337-ganador-mirrors/#findComment-732384
Share on other sites

I would like to let people know that Ganador dont actually make GENUINE CF mirrors :D

I bought a set of these for my old 33LM GTR and paid extra for the carbon version , so imagine how pissed off I was when they came and they were just a horrible pattern thats supposed to look like carbon :goddam: :goddam: :goddam:

I just think people should be aware of this fact as you pay extra for CF and it isnt really CF your getting

Link to comment
https://www.sau.com.au/forums/topic/35337-ganador-mirrors/#findComment-732756
Share on other sites

can the Ganador mirrors fold electronically ?

Each product comes with the same wiring plug as genuine one, which allows you to plug it straight into original factory wiring. The angle of the mirror glass can be adjusted by using original factory switch. (Except for mirror folding function)

*Mirror body can be folded manually

taken from the site i linked...abit of a shame ..but atleast you can fold them manually i suppose....

Link to comment
https://www.sau.com.au/forums/topic/35337-ganador-mirrors/#findComment-733195
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Was that with the cas upside or correct way up?
    • Did and sync timing with light 
    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
×
×
  • Create New...