Jump to content
SAU Community

Recommended Posts

Hi Team r34 2000 audio wiring example help needed,

Yes I have searched for this and anything that came close to my wiring did not match some wires.

I need to map the r34audiowiring photo to the targetjvc wiring photo.

The thing is I did spend hours searching for the wiring diagram and found some things that looked promising but when looked at closely some pins were missing in places they should have been and the colours did not match up.

I was once game to trial and error but not any more, certainly on my 180sx I have done this a few times with no dramas but this setup is far more mismatched and undocumented.

Hope someone can do me a translation :) I would be very very happy this weekend.

The only thing I can get for sure is the brown and light brown inner pair on the bigger connector is a speaker.

post-72381-0-22751100-1297350742_thumb.jpg

post-72381-0-94729400-1297351274_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/353570-r34-audio-wiring/
Share on other sites

Oh I think that the big connector maps all the speakers out as in 8 lines map out 4 speakers.

But the rest I just am not game enough to trial &error.. :(

Theres a pink wire out there as well as what looks like coax antenna which I have accidentally ripped - also whats not clear is that there is a fused line which I think is the 12v battery?

All in all too risky to just give it a go n see..

you might be in over your skill set ????? sorry for assuming that

the wires wont match up directly, if your "stuck" already take it to a pro, before you set off the airbag or fry one of the computers

and the coax will now need some solder(some skill) to fix if you expect to get any radio channels?

I have mounted everything nice and snug, and have a fair idea on what I'm doing however like I said I dont know which wire is which speaker and which wire is power /gnd/ign etc due to the fact that there are no Nissan wiring diagrams that match these what should be factory plugs.

No I'm not soldering - crimping instead.

Otherwise I will need to get a multimeter & do some testing. :)

Change of plans,

I ended up following these examples

http://www.patrol4x4.com/forum/nissan-patrol-gq-y60-ford-maverick-11/audio-wiring-colours-mean-what-19575/

http://www.the12volt.com/installbay/forum_posts.asp~TID~74637~PN~1

Also this diagram http://www.scribd.com/doc/4742725/The-Install-Dr-Nissan-Skyline-Stereo-Wiring is 100% correct - what threw me was the different colors. For r34's use the bottom one of course.

Also - remove the band expander if you have one, however my radio is not connected as the jap 2 pronged plug needs to be matched to a standard aerial male plug.

And did it myself - why? well dont take this to heart but Perth is a fairly boganised place that stocks the most common parts that are - mostly falcon, commodore, camry, magna etc parts. Nowhere could I find an AERPRO adapter in perth for nissan of that model after phoning around Supercheap, Repco,Jaycar and Alltronics

Err more generalisation, Perth is a mining town where - certain services and businesses are simply not found within a 15km radius south of perth so.. .not only that they are either fully booked or closed .

  • 1 year later...

Yes you can without set top box , you need a digital tv antenna( 200 bucks) plus install thru metal of car or some diversity tv antennas for digital works but not on small cars like a coupe only wagons , trucks etc , on the move digital tv is really hard to lock on to , i have it (i don't watch it while moving ) but you can listen to digital radio moving legally

You could output to back seat and use the radio upfront still

You also need a digital radio with digital tv ( most are analog or only digital radio still only a few exist) DAB-T

and you can interface multiple screen from those units but i use a video amp/ multiscreen control

You can watch 4 different sources to 4 different screens , be great in a wagon with kids lol

and you have to deal with digital lock pixels , some places will block signal no matter what you use for antenna , hell even my home tv with a digital ready antenna locks up random for a split second ?

Another option is in car pc

Or ipad on 3g

But anything is possible With enough $$$$ and skills

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...