Jump to content
SAU Community

Recommended Posts

Here is our selection of brand new HDI(Hybrid development International) Intercoolers and kits.

HDI are very well known in Australia and for the quality of their Front mount kits and EBC's.

Why choose HDI? Check these vids for a few reasons....



- The link next to each item below will take you to our site where you can view pics & details and where you can purchase and pay via paypal with our secure online checkout system.



INTERCOOLER KITS:

R34.jpg

HDI GT SPEC INTERCOOLER KIT SKYLINE R32-R33-R34 - DISCONTINUED.
FITS R32 GTST - R33 GTST - R34 GTT
- Core Size: 600x300x78
- Overall size 800x300x78(including end tanks)
- 3"Inlet & 3"Outlet - Polished Finish
- low pressure drop 0.2psi at 15psi
- strong tube and fin design
- tested for up to 80psi (around 800hp)
- plumbing made from mandrel bent aluminium with chrome polished silver
- comes with all necessary mounting brackets, 3 layer silicon joiners and t-bolt race clamps.
- 12 month warranty

GTS%20GTspec.jpg

CLICK HERE FOR THE INSTALL GUIDE

HDI GT SPEC KIT DYNO TESTED ON R33 GTST.......



-------------------------------------------------------------------------------------------------------------------------

HDI GT2 INTERCOOLER KIT SKYLINE R32-R33-R34 - AU$600.00 delivered Addtocart.gif
FITS R32 GTST - R33 GTST - R34 GTT
- Core Size: 580x285x78
- 2.75"Inlet & 2.75"Outlet
- Polished Finish
- low pressure drop
- strong tube and fin design
- Good for up to 900hp
- plumbing made from mandrel bent aluminium with chrome polished silver
- comes with all necassary mounting brackets, silicon joiners and hose clamps.
- 12 month warranty

IK-GTS-GT2-SHB.JPG

CLICK HERE FOR THE INSTALL GUIDE

-------------------------------------------------------------------------------------------------------------------------


INTERCOOLERS:

intercooler2.jpg

HDI GT SPEC FRONT MOUNT INTERCOOLER (600x300x76mm) - DISCONTINUED.
- Core Size: 600x300x78
- Overall size 800x300x78(including end tanks)
- 3"Inlet & 3"Outlet
- Polished Finish
- low pressure drop 0.2psi at 15psi
- strong tube and fin design
- tested for up to 80psi (around 800hp)
- Universal fit
- 12 Month warranty

GT%20spec.jpg

-------------------------------------------------------------------------------------------------------------------------


HDI GT2 FRONT MOUNT INTERCOOLER (580x285mmx78mm) - AU$440.00 delivered - Addtocart.gif
- Core Size: 580x285x78
- 2.75"Inlet & 2.75"Outlet
- Polished Finish
- low pressure drop
- strong tube and fin design
- Good for up to 900hp
- Universal fit
- 12 Month warranty

GT2%20INTERCOOLER2.JPG

-------------------------------------------------------------------------------------------------------------------------


More info on HDI Intercoolers & components.......

INTERCOOLER2.jpg INTERCOOLERkit2.jpg SILICON%20HOSE2.jpg SUPER%20CLAMP2.jpg

Sorry, no pick-up for these items.

Please PM or contact us if you have any questions regarding these items.

Cheers,
Paul. smile.gif
www.performance-wise.com
www.performance-wise.net
www.yellowjacketscoilpacks.com
Link to comment
https://www.sau.com.au/forums/topic/354153-hdihybrid-intercoolers-kits/
Share on other sites

  • 2 weeks later...

no charge for post

The Post costs are included in the prices.

If anyone wants to pick up then I can knock $50 off the price of a kit and $30 off the price of a cooler.

:cheers:

  • 1 month later...

Hey mate, does the R32 kits also fit R32 GTR?

Cheers

Unfortunately not sorry. I do however have some other kits for the R32 GTR which are listed on my site - see here

:cheers:

  • 6 months later...

The Post costs are included in the prices.

If anyone wants to pick up then I can knock $50 off the price of a kit and $30 off the price of a cooler.

:cheers:

So if i where to pick up the gt intercooler kit how much would it be and does it fit in r32. Gtst?

So if i where to pick up the gt intercooler kit how much would it be and does it fit in r32. Gtst?

It will fit the R32 GTST but we dont offer pick-up any more sorry.

:cheers:

  • 1 year later...

I have the HDi GT2 kits for the S14 and they are $620 delivered.

They are listed in my site here - http://www.performance-wise.com/USERIMAGES/procart12.htm

Some areas will need to be trimmed to fit this kit. Heres a basic copy of the installation manual - http://photos.imageevent.com/kadepunk/hybridinstallationguides/S1415%20instruction%2004.pdf

:cheers:

  • 5 months later...


  • Similar Content

  • Latest Posts

    • Have a vb in honour of the car comming back
    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
×
×
  • Create New...