Jump to content
SAU Community

Recommended Posts

For Sale:

Apexi SAFC2 Black Edition (new, only opened box for pic) & Apexi SITC (used)

$550 for both. Will not separate. Will not swap. PM me with interest.

Picture267.jpg

Want them sold this week.

Picture266.jpg

Edited by RubyRS4

TYRES FOR SALE

16's:

2x 205/55 R16 Michelin Pilot Preceda - 5mm tread - $70

Pics: http://hardtuned.net/forums/index.php?showtopic=354612

17's:

2x 205/45 R17 - Michelin Pilot Preceda/Fulda Exelero - 6mm tread - $80

2x 215/45 R17 - Maxxis MA-V1/Potenza RE050 - 6-7mm tread - $100

2x 235/45 R17 - Dunlop SP Sport 3000A - 5-6mm tread - $120

2x 235/45 R17 - Maxxis MA-V1 - 3mm tread - $40

Pics: http://hardtuned.net/forums/index.php?showtopic=354613

18's:

2x 215/45 R18 Bridgestone Potenza RE050A - 5-6mm tread - $120

2x 235/40 R18 Marshal Power Racer II - 6-7mm tread with camber wear - $80

Pics: http://hardtuned.net/forums/index.php?showtopic=354614

Located near Mitcham in SA.

Full set of R33 GTR Vspec-2 shocks and springs.

Bought these as seller assured me they'd fit on my gts-t but was not the case.

Very good condition, no leaks, cracks, not bent etc..

Have no use for these, I paid $350 all up...

willing to let them go for $300ono, make me an offer.

PIC: http://i2.photobucket.com/albums/y33/kfsRule_2/DSCF0203.jpg

BRAND NEW 520x-ring JT conversion for Honda CBR 250R/RR

Included are:

- 14 tooth front JT sprocket

- 48 tooth rear JT sprocket

- 520 pitch x-ring JT "Asahi" chain

The sprocket kit gives you lots of take off but reduces top speed to around 160. wheelies 1st and 2nd without much effort.

Great solution if you want more go for your underpowered 250r/rr. Beats any other mods by miles.

All quality parts, never used. I bought 2 sets by mistake... retail at $250+

Chasing around $220ono, make me an offer.

PIC: http://i2.photobucket.com/albums/y33/kfsRule_2/DSCF0202.jpg

Cmon guys, make an offer, ill throw in a GTR strut brace with the suspension for free!!

really need the money right about now :P

Have two BRAND NEW 5 Litre bottles of the following. I want $35 NO OFFERS for each bottle. RRP is $52 each. Located in SA (Northern Suburbs)

Castrol Edge 5W-30

Full Synthetic recommended for highly tuned four cylinder engines and the latest technology

EDGE Sport 5W-30 provides superb strength and ultimate protection even when running hard, fast or hot. It has been developed to provide enhanced fuel efficiency and good oil consumption control in modern petrol engines designed to operate on lower viscosity oils.

Specifically designed to:

* go the distance! This oil has been tested to last in scorching turbo temperatures

* provide outstanding protection fighting harmful deposits and other by products

* help keep catalyst working efficiently

* use synthetic technology to deliver improved performance over conventional oils.

* SAE 5W-30

* API SM/CF

* ACEA A3/B3/B4

You can look at the spec sheet of the oil here

post-17639-1229517527_thumb.jpg

Need to sell this weekend. After that they're not for sale. I thought these would be a hot item.

For Sale:

Apexi SAFC2 Black Edition (new, only opened box for pic) & Apexi SITC (used)

$550 for both. Will not separate. Will not swap. PM me with interest.

Picture267.jpg

Want them sold this week.

Picture266.jpg

Edited by RubyRS4

For Sale Brand New never used

Bosch 040 in tank with earls fitting or speed flow i forget

Microtech lt10s ecu been remapped bye microtech with rb25det base map also payed extra for the map put on 30psi bar map sensor witch is extra also

Custom wiring harness to suit rb25det cost a extra $200 to get made

Manual for lt ecu

i had to wait 2 to 3 weeks for this the only reason i am selling it because its no use to my new motor setup so i bought a lt12 for that setup

i would rather you see the stuff in person if your interested

i will let the whole lot go for $1100

contact me on 0401409575(Allan)

also have a b&m line locker too $50

&

Malpassi Adjustable EFI Rising Rate Fuel Pressure Regulator 1:1 with gauge $80

cheers

Allan

For sale.

Item:

R33 GTR wheels 17x9" +30 offset front and rear with tyres

215/45/r17 Yokohama stretched on the front 60ish% tread

225/50/r17 Dunlop stretched on the back on the rear with 85% tread.

Condition: Very minor gutter rash on a couple of the wheels, nothing noticeable, though.

Age:From an R33 GTR so about 1995.

Details: Forged wheels and very lightweight for 9" rims.

Very nice looking wheel with great offsets for any r32/33/34 with standard guards. they sit fairly flush with my r32 gaurds, with the bead of the rim slightly outside.

Price:$1200

Contact me via pm or sms/call me on 0431 320 803 if your interested.

Pics of the wheels on my r32:

IMG_0024.jpg

DSC00034.jpg

Edited by Greasy

FOR SALE R32 GTS-T TYPE M FRONT/REAR SEATS GOOD NIC A LITTLE DUSTY FROM STORAGE AS WELL AS THE REAR PILLAR TRIMS WITH ARM REST FOR REAR PASSNAGERS.

TAKING OFFERS ITEMS STILL IN CAR.LOCATION IS BRIGHTON.PM ME OR IF NEEDED 0402217466.CHEERS.

WILL SWAP WITH CASH FOR BRIDE SEAT TO SUIT 32.OR OTHER 32 BITZ.

ALSO HAVE STK GTS-T REAR BAR IN GOOD NIC PLUS REAR LOWER BAR/GUARD TRIMS PANELS 1 IS DAMAGED (HAS CRACKS AND SPLITS) IN MAROON.

Edited by SPRIGZY

hey guys, well im chasing some new wheels so wanting to offload these rather quick. As topic says 17" rims 5x114.3, unsure of offset but they almost fill the falcon guards so gives you some idea. They are all in good condition, some minor scratches. Tyres are still in good condition, front and rear both with legal tread. Bridgestone on rear and Antyres on front. Nice looking wheels, bit of dish. I have 3 of the 4 centre caps too.

After $600, wanting a quick sale.

pics, they really need a clean, come up looking very nice after a scrub but am in a rush this morning and already in my work clothes lol.

Image009.jpg

Image005_3.jpg

Image007_1.jpg

S13 track/drift project....

This has and is being built too give people the impression that it has come straight from the land of the rising sun....

here we go....

S13 Silvia

5 speed manual

CA

gtr cooler with custom piping

gtr fuel pump

air filter

front strut brace

rear strut brace

boot brace

full cage (with extra bracing -done in japan)

q45 afm (not fitted)

de sticks (not fitted)

2 way diff (not fitted)

aluminium radiator (not fitted)

garret 3071r (not fitted)

exedy 5 puk clutch (not fitted)

recaro fix backed seat with sliding rail

dildo knob

aftermarket steering wheel

interior stripped and painted

coilovers

full ET exhaust with screamer and cannon

17x9 +34 front rims and 17x9 +5ish offset on the rear (new tyres allround)

gtr style grill

vertex front bar

nismo side skirts

origin rear bar

carbon fibre bonnet

carbon fibre canads

carbon fibre roof spoiler

carbon fibre t wing

price wise id be looking for around the 9K mark O N O or willing to trade for another toy (road rego'd)

only got 2 photos which i will post up in a few minutes...

Cheers ADRIAN

R/C Helicopter for sale, 65cm Long. Can fly upsidedown!!

Model: Esky Belt-CP

Specs:

6 channel

Length:650mm

Height:230mm

Electric Brushless Motor (Very powerful!)

Belt drive tail rotor (Better control than separate tail motor)

Upgraded Aluminium/Alloy Head, Carbon fibre blades

Training Kit (Pingpong balls)

Transmitter (Controller)

2 Lithium-polymer batteries

Some spare parts

Comes with everything you see in the first picture.

$500

post-47300-1225881748_thumb.jpg

Old photo with training kit (pingpong balls)

post-47300-1225882164_thumb.jpg

Standard

post-47300-1225880741_thumb.jpg

Video -

- http://au.youtube.com/watch?v=H_KVZoouShI&...feature=related

Last minute crissy present for anyone.

Original Post on page 50 with pics

Price drop 400 bucks.

1) R32 Stock exhaust - Great for getting ya pride & joy off defect - Make me an offer

2) Complete set of 20 crome wheel nuts - brand new - $30 ono

3) Pair of 2003 model wrx seats - used for 2 weeks only - These are $2000 per seat brand new with railing from subaro. - The pair with rails: Make me an offer

Pm or call 0400 259 598 (Chris)

post-57119-1230010161_thumb.jpg

post-57119-1230010255_thumb.jpg

post-57119-1230010370_thumb.jpg

post-57119-1230010505_thumb.jpg

post-57119-1230010833_thumb.jpg

im looking at getting sum r34 gtr wheels on the stag... so im seeing what interest would be out there...

i would need to either swap, or organise it so i could get them put on the drop off my wheels (dont have spares)

will 225 40 18s fit on 34 gtr wheels? if so i would keep my tyers, and just get the wheels, and if not i would want them to come with wheels.

here are some quick pics, pm me for more pics of it your selling gtr wheels

mine are 18 inch Racing Hart wheels...18x9... i know of 2 other gold sets in adelaide... 1 on a black stag and 1 on a suby forester...

they are Dunlop Sport Maxx tyers (225 40 18) 2 brand new, 1 80% left and 1 40% left.

post-47249-1230012022_thumb.jpg

post-47249-1230012052_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...