Jump to content
SAU Community

Recommended Posts

I got a set of STOCK Skyline 5 stud wheels, still in good condition just 1 rim has a bit of gutter rash as you can see in the pictures. Wrapped around in bridgestone tyres about 30-60% tread left.

lookin for quick $250 because tyres arnt that great but still driveable.

PM or call me on 0422319720

located in Paralowie 5108!

post-41719-1238503503_thumb.jpg

post-41719-1238503523_thumb.jpg

post-41719-1238503531_thumb.jpg

For Sale

Trust TD06-17C turbo (to suit RB20-25), HKS Cast Manifold (low mount arrangement) and 32mm external wastegate

Turbo has spacer plate so it can be bolted onto standard RB manifold (T3 Flange). Was told it was basically a bolt on upgrade kit for an RB20.

HKS Manifold has the same T3 flange and provision for external gate (said 32mm external gate supplied)

Has only been dummy mounted onto engine at this stage, not been used

Be looking at around $1300 as a package (which is well under what i paid for both items separately). Would consider swaps for a high mount manifold / gate + cash adjustment (or if you can get hold of an EVO turbo for me i'll consider a good deal, doesnt have to be in good condition)

pic (excusing my mate and his wacky look)

Image234.jpg

Edited by Matty 31
I got a set of STOCK Skyline 5 stud wheels, still in good condition just 1 rim has a bit of gutter rash as you can see in the pictures. Wrapped around in bridgestone tyres about 30-60% tread left.

lookin for quick $250 because tyres arnt that great but still driveable.

PM or call me on 0422319720

located in Paralowie 5108!

MORE PICS ADDED!!! had another look today the wheels have better tread than i thought.. 1 has abit of camber worn though but all the other ones are still good. atleast 60% life left lol

post-41719-1238571974_thumb.jpg

post-41719-1238572007_thumb.jpg

Ok really didnt wana sell this setup as its perfectly matched and top of the range quality parts. But as these parts dont suit the setup in my new car, sadly they must be sold.

Please note, these arnt the recent chinese sell out versions of soundstream parts. But were purchased when soundstream had a focus on quality rather than $$$.

Van Gogh Subs

-12"

-DVC

-600 RMS

-$600 each brand new when i bought them.

Basically top of the line SQ sub made by soundstream. With these u will hear ur music, not be a one note wonder.

vangogho.jpg

Edge Amp

-Monoblock

-900RMS

-$900 brand new when i bought it.

This is around the middle of the range in the spectrum of soundstream, however puts out a LOT of power.

ega900d.jpg

Box

-custom box tuned for the van gogh subs.

-fits in a s13 boot, so can fit anything.

-cost me around $150 to get made up, to fit a s13 boot, not a easy job.

l51042ff16a57efd1391de2.jpg

Now everyone knows how shallow and small a silvia boot is, let alone the space inside the cabin. Yet with no sound deadening or tuning the car acustics, this setup made 132 db. No doubt around the 140 mark if in a hatch or went to the effort of getting the setup tuned with the car.

As u can see, this setup cost me well over $2000. All parts are working 100%, as i wouldnt have them for sale otherwise. Duno how much these parts go for these days. I would consider selling the entire setup for $1000.

If u go for a walk thru JB, u will see how much $1000 will get u. maybe some dodgy sony gear with a box if ur lucky. its like comparing an excel with a lambo. Quality and performance cant be compared.

Let me know of any questions u may have, thanks.

Pedders Struts with lovells springs to suit R32

regency legal and sit at the exact height that is allowed

no knocks or leaks that i know off

still stiff enough for everyday driving

$450 FIRM

(dont try and lowball i need to get my car back so yeh)

inspections are welcome as there still on the car

call 0417 084 405

For Sale

Trust TD06-17C turbo (to suit RB20-25), HKS Cast Manifold (low mount arrangement) and 32mm external wastegate

Turbo has spacer plate so it can be bolted onto standard RB manifold (T3 Flange). Was told it was basically a bolt on upgrade kit for an RB20.

HKS Manifold has the same T3 flange and provision for external gate (said 32mm external gate supplied)

Has only been dummy mounted onto engine at this stage, not been used

Be looking at around $1300 as a package (which is well under what i paid for both items separately). Would consider swaps for a high mount manifold / gate + cash adjustment (or if you can get hold of an EVO turbo for me i'll consider a good deal, doesnt have to be in good condition)

pic (excusing my mate and his wacky look)

Image234.jpg

turbo sold pending payment

manifold / gate sold pending payment / pickup

Items

1) work rims not sure what model they are but they 17x9, 5x114.3 all round with tyres! rears are almost gone but the fronts are still practically new SOLD

2) avs model 6 17's 5x114.3, comes with a pair of tyre which are good and the other 2 are bare rims SOLD

3) r33 4 door rear pods

4) r33 gtr style rear pods, not painted

Ondition

1) the rims are average with alot of gutter rash on 1 rim

2) these were painted in black and are average

3) the pods are fine

4) these pods are new and never fitted

Extra info

1) the work rims are forsale because i feel like a change

2) the avs rims are just sitting there doing nothing

3) i brought the pods because i was basically lied to! the guy said they'll fit 2 door but they don't

4) i just brought these and though i would rather try and find a different rear bar! something like a 400r

Prices

1) $800

2) $400

3) $100

4) $150

Contact details

Pm me or msg on 0401581445

i'll prefer a msg because i work in a place where there's not very good reception

i got no pics of the stuff i'm selling but i have one with the work rims on my car

both rims sold

Selling R33 Gts-t Apexi ehxaust $500, Pick up at Elizabeth downs 5113. There is a small crack underneath which i only noticed when i pulled the exhaust off i didnt hear any leak what so ever so it was a surprise to me wouldnt really bother me but anyone with a welder could fix this easy. Reason for selling is because i just bought all new gear for my car so this has to go.

P020409_1700.jpg

P020409_170001.jpg

P020409_1701.jpg

ok got a bunch of stuff i want gone ASAP, need to fund new turbo!

R31 stockie, blown tyre, $5

033.jpg

16" tyre, good tread, $5

032.jpg

stack of 15" tyres, 7 in total, various sizes, most with decent tread, $100

031.jpg

R31 king springs, standard height, have been cut, not sure how much as have never used them, $20

029.jpg

R31 dash cluster, needs globes, all gauges work, $20

028.jpg

Autotechnica steering wheel, sweet looking wheel, leather, $100

002.jpg

Koya wheel nuts, unused, 8 in total with lock nut, 1.5mm thread, $20

003.jpg

Koya wheel nuts, 6 in total with lock nut, 1.25mm tread, $15

004.jpg

Random wheel nuts, 1.25mm and 1.5mm sizes, $5 per 4

005.jpg

Blue neon, powere by cigarette lighter, has had longer cord so can reach boot if needed, $10

006.jpg

R31 standard panhard rod, $5

008.jpg

8mm slip on spacer, 4 stud. $10

011.jpg

R31 front and rear standard swaybars, $10 each

013.jpg

R31 passeneger seat, good condition, small burn on the back, $20

014.jpg

R31 standard castor rods, $10

015.jpg

Hot dog/resinator to suit 3" exhaust system, $40

016.jpg

Tow rope, not needed now that i tow car up, $20

022.jpg

Nintendo DS Lite

Red/Black colour, used for about 20 minutes!

Comes with charger, Cooking Guide game and a red zip up case.

$200 (have box too)

PSP,black one, not the slim and lite one.

Used for a couple of weeks.

Comes with charger, Virtua Tennis World Tour, Outrun, Ricky Ponting Cricket, the psp headphones with controls and the media manager software.

$250

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...