Jump to content
SAU Community

Recommended Posts

mums daily car,

she doesnt need it anymore wants me to get rid of it.

91 KF laser, white, manual, 1.6L carby, think its just under 200,000kms or maybe just over. Runs fine, new cv joints, new brake pads, water pump/timing belt done less then 3 months ago. comes with 15" alloys, however one tyre is bust and is on a stocky. very very cheap on fuel. Battery less then a year old. Bit of paint missing on rear bumper but its cheap!!! Rego runs out soon.

$1,200ono.

pm me

or 0422 314 938 (Marko)

TRD sticker can be negotiated with the purchase :P

Can get pics on request but come and see it in person, take it for a test drive or whatever!!!

Item:

RB26- R32/33/34 complete oil cooler kit for sale with stainless hoses , filter holder + brackets

18 row cooler , complete with all adaptor fittings was $400 new

Item condition:

:P New

Contact details:

Please pm

Price:

$220 - or Reasonable offers !!!!!

Pics:

Drift special tyres, still lots of legal tread ??

235/40/18 x 2 Firenza ST08

,

some inner wear but not on the wear bars yet.

you pick them up from down south, $ 40 for the pair

PM... first one gets em.

wrecking s1 r33 in silver im keeping these parts but everything else for sale, the car has rear end damage

KEEPING: gearbox, front brakes,tail shaft,steering rack,front lower control arms,

THE ENGINE IS A SERIES 2 complete engine, loom,ecu

completely stock, never even been boosted.

still in the car so can hear running, compression and any other tests welcome....$1800 $1600

OTHER PARTS:

bonnet $100

S1 front bar $80

lh guard with indicator $100 each $80

s1 headlight $80 each

rh complete door $150 each

s2 spoiler $50

rh mirror $30 each

type m sides fiber glass $100 $80 needs bit a work

fuel flap $10

rear window $100 taken out

quarter glass $80

radiator $100

condenser $50

condenser fan $50

master cylinder non abs $80

washer bottle $20

cluster $100

dash $100

mint air bag steering wheel with clock spring $140

seats $100 pair

glove box $20

console $40

door trims and 1/4 panel trims $40 each

seat belts $20 each mint

indicator and wiper stalk $25

rear seats $40

manaul conversion pedals clutch master interior boot trim $150

anything else just ask, will swap for parts of interest!

LOCATED IN ATHOL PARK...TEXT or CALL on 0422030855

Edited by hcR324door
mums daily car,

she doesnt need it anymore wants me to get rid of it.

91 KF laser, white, manual, 1.6L carby, think its just under 200,000kms or maybe just over. Runs fine, new cv joints, new brake pads, water pump/timing belt done less then 3 months ago. comes with 15" alloys, however one tyre is bust and is on a stocky. very very cheap on fuel. Battery less then a year old. Bit of paint missing on rear bumper but its cheap!!! Rego runs out soon.

$1,200ono.

pm me

or 0422 314 938 (Marko)

TRD sticker can be negotiated with the purchase :bunny:

Can get pics on request but come and see it in person, take it for a test drive or whatever!!!

SOLD

S14 front 4 pot calipers + rotors $220

includes pins, shims, stock lines, good Bendix pads, slotted RDA rotors

Broken S14 SR20DET gearbox, 160,000kms old $60

Blown second gear, good for cut and shut bellhousing or rebuild

Factory S14 SR20DET sump $make an offer

Taken out of car to upgrade to bigger baffled unit

Whiteline eccentric camber adjustment bolts KCA414 $50

Adjust camber on the front struts, 14mm bolt, suits S14 and lots of others

180SX factory quarter window visor thingos $make an offer

a few clips broken when removed from car

R32 handbrake cables $20

Stock S14 swaybars $30

Can provide photos on request. Prices somewhat negotiable.

Located north eastern suburbs SA. PM or SMS 0424085308.

:)

Still got 2 sets of suspension to sell

$600 for Bilstein R32 GTR/GTS4 - provides a nice balance between street and track performance, but is not street legal due to eyebrow height

$500 for Tein HR R32 GTR/GTS4 - stiffer than the bilsteins, so more oriented to track use, however these actually ride higher and are street legal

and I can still source injectors for those who want it. Windowshoppers and shoegazers can get f**ked. PM me only if u want to buy, I dont tolerate time wasters

-D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
    • I don't care for these at all, but at least the underside looks straight and not rusty. A good basis for a long life. Many cars from Japan have been lifted with forklifts and f**ked almost irrepairably.
    • Yes, but it's not dumb or dodgy. You can build a perfectly good boost controller from a pressure reg, a relief valve (looks same same as a reg if all from Norgren or SMC, for example) and a check valve. I ran one for years. Only superceded with  EBC because I could get one for cheaps and wanted finer control.   THis mod is certainly not a sketchy boost mod, provided the boost is kept below the "spin to death" threshold of the turbos.
×
×
  • Create New...