Jump to content
SAU Community

Recommended Posts

For Sale - 1996 Nissan Skyline, original condition, unmolested, body work, interior, just everything is mint condition

Please contact me via phone as i don't come on here alot, Reece 0433349400 located in the gawler area

http://www.carsales....ne=15&__Dx=mode matchany&__D=r33&silo=1011&seot=1&__sid=12CDA5CFE580&__N=1216 1246 1247 1252 1282 901&__Ns=pCar_LastModifiedDate_DateTime|1&__Qpb=1&__Ntx=mode matchallpartial&Cr=1&__Ntt=r33&trecs=81

After $14,500 or best offer, thanks

Hey all, I'm stripping the inside of my track R32 atm. If anyone wants anything let me know asap, as in, in the next couple of days (preferably 2day) otherwise its pretty much all going in the bin. I just feel bad coz it's going to waste and someone might b able to use it. Most parts I'll giveaway. Let me know what u want.

Msg me, it's easier. 0433 975 575.

Drivers seat, Back seat, parstal shelf, trims, hood lining, rear seatbelts, heater core, fan unit, boot trims, etc.

I'm keeping the passenger seat, dash and possibly the centre console and unsure on door trims yet. Everything else is pretty much up for grabs.

Cheers. :)

forsale

brand new KINCROME torque wrench

graduated 10-150ft/lbs

13.6-203.5 nm

1/2 inch drive

http://www.ebay.com.au/itm/Kincrome-Micrometer-Torque-Wrench-1-2-Drive-NEW-MTW150F-/320667813317?pt=AU_Hand_Tools&hash=item4aa94a85c5

same as here...

$75 braught it for when i did my rebuild but lewis engines ended up assembling it all

1993 Series 1 Rolling shell

comes with;

complete series 2 block with ancillaries

gearbox

tailshaft

cusco 2 way

half shafts

solid cradle bushes

racing gear coilovers

brand new Bosch 040 in-tank pump (2,000kms old)

regency friendly window tint

basically its complete, all you really need is an engine and you've got yourself a good looking streeter

has clean rego, not defected or anything.

Looking for $5,000 or something S chassis for swaps (defected with fruit ideally)

i might even include 3 months rego on it

LOCATED IN SOUTH AUSTRALIA

PICs of what it used to look like

182651_10150101380359216_656279215_6061257_7814820_n.jpg

169087_10150101380264216_656279215_6061255_774383_n.jpg

R33 FOR SALE ( has near no comp on cyl 3 an no turbo )

car has done 110,000klms

- will come with rb30 bottom end, series 2 with 1500 klms

-red/maroon color

-SAFC

-adjustable castor

-adjustable camber

-cradle locks

-hicas lock

-HKS drag rear coils

-super low springs with a/m shocks front ( very stiff, cant think brand off head rite now )

-skirts

-pods

-walbro fuely

-pillar mounted boost gauge

-rear wing deleted

$3800 with 17x9 5 spoke eleganze with near brand new tread or $3000 firm bring your own wheels

( would rather sell without wheels )

-can throw in GTR GUARDS AN BONNET for extra $1000

txt for pics 0459 664 269

also pics on here if click on my old topics when was selling the rimzz

Edited by PROXIMITY

Running out of time to pay for parts on hold so...

I have

2x Stanton T.60 vinyl decks with cords and slipmats (got them 2nd hand off ebay 6 months ago)

2x Ortofon Om Pro S scratch/mix cartridges with new Stanton Headshells (brand new 6 months ago)

1x Audioline 4ch mixer (dmix4sp) with cords (brand new 6 months ago)

10x jungle/drumn'bass vinyl

old pair of headphones

record cleaner

old cartridge and headshell 1x

All items in good condition only used the setup a dozen times and is now in boxes under a spare bed

All you will need is an amp and speakers, I had it hooked up to my surround sound

$580 ono

More info and pics on request

Regretful sale, help fund my mods!

Price drop $520

post-78650-0-45378100-1306734919_thumb.jpg

post-78650-0-26334800-1306734940_thumb.jpg

post-78650-0-37894600-1306734958_thumb.jpg

hey guys, well time for a change so the car that has done me well for the past 3ish years is time to go. Been a great car, never had any problems with it.

2003 BA XT Falcon

White

196,***kms

tow bar

tinted windows

aftermarket exhaust

17" Drift R's

previous owner put a pod filter on it too

Standard otherwise.

Bad:

Brake discs need machining, bit of vibrations under brakes, which i was going to get done on next service.

Rear tyres could use replacing (not from doing skids either so dont get any ideas lol)

Headlight out and taillight out which i will try and get around to replacing before sale

Usual couple of small shopping trolley dents

Thats about it, reason for sale is i want to get a 4x4 for some off road fun so i will consider swaps for a suitable 4x4, otherwise looking for $9,900 $9000. $8500ono $8200!!!

Cheers.

Will come with 3 months rego too.

took it today for a professional clean inside and out and she came up a treat, so car now comes nice and sparkly clean if purchased soon. Here is a couple of pics i just took.

IMG_6353.jpg

IMG_6354.jpg

IMG_6355.jpg

IMG_6356.jpg

IMG_6357.jpg

IMG_6358.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...