Jump to content
SAU Community

Recommended Posts

hi all i am de modding my stagea

ive got a hks 'gt25/35 54t' turbo

fantastic upgrade for any rb 20 and 25!

huge response and great powerful turbo!

i ran this turbo on 16psi and got 260 rwkw on the neo 25, with usual mods, hit full boost at like 3250rmp :)

it is 15,000ks old, uses stock manfold, dump pipe, and cooler pipes.... great replacement for the stockie.

comes with all bolts, braided lines and oil drain, 12psi actuator (adjustable) this is completely ready to rock

$1500 plus postage

pick up in adelaide welcome or txt 0400099986

post-47249-0-03227200-1306759220_thumb.jpg

post-47249-0-23109000-1306759226_thumb.jpg

post-47249-0-54622900-1306759233_thumb.jpg

post-47249-0-33767800-1306759244_thumb.jpg

post-47249-0-66876300-1306759251_thumb.jpg

post-47249-0-91955200-1306759259_thumb.jpg

rb20/25 intercooler kit

AVARD brand, amazing quality no cutting req as it bolts from the side tanks to the chassis rails!.... no drilling cutting or ghettoness!

comes with all pipes clamps and brackets! $500 no bent fins too !!!

rb25 neo Seimens Deka injectors (top feed)

6 injecors

1x wiring loom (stock one, modded with new plugs)

2xrail spacers

all o rings etc

this will directly bolt up to your stock set up. nothing eles to worry about

$500

tein type CS coilovers

suit auto rs4 stagea (series 1 and 2)

32 wat dampner adj, heigh adj

comes with c spaners, some stickers from new, and the little dampner key.

also will include 10k old isc toe and camber arms

$850

PRICE DROP $800

post-47249-0-68509400-1306759987_thumb.jpg

post-47249-0-58085500-1306759996_thumb.jpg

Edited by chef_stagea

RETURNING TO STOCK!

All aftermarket parts for sale, Im not parting out the car only returning it to stock so if you see any aftermarket parts not listed just mention and I will grab a price.

Contact: 0401 404 104

ENGINE/POWER

- T3/T4 hi-flow turbo with VG30 exhaust housing, Comes with receipts for high flow. Currently making 252rwkw on 16 psi, If quick can be driven on the car.

$800

- Apexi Power FC, With hand controller. Comes with tune for Injectors/AFM/Turbo. $1300

- Turbo Back 3.5" Exhaust, straight through with twin 3" Stainless Steel pipes and built in Apexi Exhaust Valve Control. $650

- Z32 Air Flow Meter (Capable of 400rwkw) $200 (currently on hold)

- 550cc Aftermarket Injectors (Currently running at 77% injector cycle) $400 (currently on hold)

- Nismo Fuel Pressure Regulator $100

- Stainless Steel Intake Pipe $120

SUSPENSION

- TOP STOP Strut brace $150

- Rear Strut Brace $50

- Bilstein shocks with Whiteline Springs (Height Adjustable) $600

- Cusco Brake Stopper $60

INTERIOR

- Oil Temp, Blitz Gauge

- Oil Pressure, Blitz Gauge

- Boost pressure, Blitz Gauge $350 for all 3 gauges and senders

EXTERIOR

- DNA Wheels. 17x9 +30 all round $1100

SPARE PARTS

- JUN front bumper $150

- JUN Sideskirts $100

copyofsdc11928.jpg

copyofsdc11924.jpg

copyofsdc11926.jpg

enginecut.jpg

all up for sale I have:

1x pair stock R32 RB26 GTR manifolds $100 the pair

1x pair stock R32 Rb26 GTR turbo dump pipes $100 the pair.

1x 5-point clip-buckle harness, brand RCI. $50

1x r32 rb26 GTR oil pump, used but in good condition $50

1x r32 RB26 GTR harmonic balancer, in good condition (used) $80

1x oil catch can with mini pod-filter, brand new, $50

1x 3-guage holder set, new. $30

2x Q45 Air Flow Metres, Working condition, with plugs. $100 the pair, or $50 each

1x Z32 Air Flow Metre, working condition with plugs, $100

1x pair pod filters. Brand new never used. $50 the pair, or $30 each seperately

1x stock R32 RB26 GTR Intake pipwork, $50 the lot

1x stock R32 RB26 GTR coilpack cover blue, $100

1 x stock R32 RB26 GTR turbo two-into-one exhaust front pipe, good condition $50

1x 3" decat pipe with flex section, brand new never used $60

1x 3" twin barrel mid-muffler resonator section, brand new never used $80

1x full set Tein suspension to suit R32 GTS-T. Came out of four-door R32. Tein shocks/springs. In good condition $400

thanks. PM me and we'll arrange what you want, etc.

Offers considered

Also forgot to mention I have some 33 GTR rims with Toyo R888 Proxes which aren't very old!

taking reasonable offers now on everything but 25mm spacers, firm @ $100.

G-Tech

Injectors

Wheel studs

R32 disk brakes

etc.........

Well I've been offered $7900 as a trade in on my Stagea rs-4 1998 days edition. Refer to ad in general cars for sale.

If you can beat that offer, the car is yours. I'd really prefer it went to someone who wants one. 0421515816

Bride Low Max GIAS style (same as in pic) used in my 180 for a week and test fitted in my s15 so they are as new they are fiber glass witg black backs..... with power rails. $900 pair

bride material $100....about 1.2meters x 1.8meters

fake defi gauges new in box's never used, comes with all sensors, holders $250 for all 4

they look exactly the same as real defis

r34 rear 5 stud hubs, disks, calipers,pads, hand brake cables $300.

r34 gtt wheels with centre caps, 80% tread on 3 tires, the other has a puncture $400.

s13 sr20 5 bolt diff $40..

s15 weather shields $180 the pair

r34 4dr weather shields $100 for all 4

r34 gtt diff $100

r34 gtt power steering rack $100

located in mansfield pk s.a....pics will be up soon ....http://nissansilvia.com/forums/index.php?showtopic=493273

z32 afm sold

other stuff for sale

1x pair stock R32 RB26 GTR manifolds $100 the pair

1x pair stock R32 Rb26 GTR turbo dump pipes $100 the pair.

1x 5-point clip-buckle harness, brand RCI. $50

1x r32 rb26 GTR oil pump, used but in good condition $50

1x r32 RB26 GTR harmonic balancer, in good condition (used) $80

1x oil catch can with mini pod-filter, brand new, $50

1x 3-guage holder set, new. $30

2x Q45 Air Flow Metres, Working condition, with plugs. $100 the pair, or $50 each

1x pair pod filters. Brand new never used. $50 the pair, or $30 each seperately

1x stock R32 RB26 GTR Intake pipwork, $50 the lot

1x stock R32 RB26 GTR coilpack cover blue, $100

1 x stock R32 RB26 GTR turbo two-into-one exhaust front pipe, good condition $50

1x 3" decat pipe with flex section, brand new never used $60

1x 3" twin barrel mid-muffler resonator section, brand new never used $80

1x full set Tein suspension to suit R32 GTS-T. Came out of four-door R32. Tein shocks/springs. In good condition $400

WP_000069.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...