Jump to content
SAU Community

Recommended Posts

Located in Southern Suburbs of SA.

Pickup preferred but will post if necessary.

No low-ballers please but willing to consider somewhat reasonable offers for prices listed that aren't firm.

Reason for sale is because I have since upgraded and no longer require the current parts:

PRICE DROP: for S14 / S15 2nd hand Hybrid FMIC RS Spec - $200 FIRM - Includes all silicon joiners and clamps!

Great for decent power gains required on a budget without much pressure drop.

Piping is damaged but will throw that in for free as I believe there may be missing pipes too (can only find 2 pieces since my last tune as tuners changed intercooler to a Blitz CS). Buyer is to arrange adequate piping for intercooler core.

Core was previously damaged due to the preivous owner incorrectly installing it, however it has been addressed with a weld and Epoxy. Doesn't leak any boost what-so-ever from the core.

If you are concerned it may leak then try some Expoy Multi-Metal from Sprint / Autobarn for $10, BUT I CAN GAURANTEE IT WILL NOT LEAK!

hybridfmic.jpg

PRICE DROP S15: Unused Whiteline Subframe Bush set (Plus Polyurethane Type) - $150 ONO

Stiffen up that chassis and minimise that horrible Noise, harshness and vibration on your daily / track car!

sfbushes.jpg

S14 / S15: Unused and Unpackaged K&N Panel Filter - $80 FIRM

Throw away that Ryco filter and get some air flow form a proven filter to provide better throttle response and economy.

knfilter.jpg

Unused Nismo 1.3 Bar Radiator Cap - $50 FIRM

Hold that pressure in for more effective cooling!

nismoradcap.jpg

Velocity 12" Subwoofer including box in OK condition - $50 ONO.

NOTE: There are some small dents at the front of the cone but nothing that should affect the output.

Good for a low-mid end system without too many hassles. Good bass for the price paid. Comes with harness holders without the belts, one broken but usable. Also has a plate for cable attachments (2nd pic).

subwoofa.jpg

subwoofa2.jpg

S15: Used Clutch fork pivot ball from an Xtreme Clutch set - $30 ONO

You will want this if you have an aftermarket kit and didn't install the upgraded clutch fort pivot ball to minimise the load that's placed on the standard one.

throwout.jpg

2nd Hand Gearbox and Engine Mounts from an S15, OK Condition - Make an offer $?

mount1j.jpgmount2v.jpg

mount3q.jpg

8x NGK BCPR7ES to Suit Modified CA / RB Setups (will fit SR but not the preferred sparkplug) - $30 ONO (RELISTED)

sparkplugs.jpg

In regards to contacting, please PM me and we can go from there.

Cheers.

still keen to swap my CF bonnet for your fibreglass one..

sorry Adrian I know you're keen, ........... but Im not :(

I like the bonnet I paid good $ for, and if the house sells soon enough I'll be keeping the track car.

For sale:

068bc2c2.jpg

R34 GTR Turbo's and split dump pipes.

78,000kms on turbos, amazing condition.

$500

Also for sale but only for the weekend as i'd rather keep them, my Midori front pipes 76mm diameter

b1eb5222.jpg

$1000 firm thats what I paid for them, you don't wanna pay 1k thats fine i'll keep them.

Also, BNR32 OEM Front Grille. Like new. With new clips. $200

For sale:

R32 4 door BN style kit, silver in colour, looks like new, no cracks or makers

$250

R33 GTR Front mount intercooler, used but in very good condition $200

R32 dash no bubbles or cracks perfect condition

$150

need it all gone, i have dropped prices

pics can be found in link,

0415490212

http://www.nissansilvia.com/forums/index.php?showtopic=507635

FOR SALE!

Cleaning excess stuff outa my garden shed.

R34 Coupe seats whole set. rails have been hacked. Would have been mint otherwise, no drivers side wear on bolster. $200 the lot

R33 Genuine floor mats, front only pretty mint. $80 the pair

R33 Fitted floor mats, funky Japanese brand, front & rear, good cond $50

Blitz LM replacement pod filter element. New in box. $20

Various Air box's used filters for 33. $20 ea

Standard r34 cooler and one bottom pipe. $30

Make a reasonable offer!

PH / text 0402.621.974

For Sale R32 bits from a 2 Door

. R32 - Vented Fibregalss Front Guards in Gunmetal Grey. In pretty good condition. RH Guard has part of a Fibreglass GTR kit on it and is sikaflexed on. $250ono for the pair.

. R32 2 Door - Fibreglass Side Skirts In Gunmetal Grey. Not the best condition. RH skirt is GTR N1 Style & LH Skirt is Type M. $60ono for the pair.

. R32 GTST - Front Indicators painted but look awsome on a dark color car. $70ono

Or take the lot for $360. Feel free to come and have a look at the parts. Willing to swap everything + Cash for a Genuine N1 GTR Front Bar in any color but would prefer Gunmetal.

Located southern suburbs. PM or txt for further info 0433 522 234

Cheers Tim

post-62269-0-71906300-1319355325_thumb.jpg

post-62269-0-94406800-1319355601_thumb.jpg

post-62269-0-46118600-1319355771_thumb.jpg

post-62269-0-96222900-1319355879_thumb.jpg

post-62269-0-35880000-1319355937_thumb.jpg

post-62269-0-25724900-1319355984_thumb.jpg

post-62269-0-84670900-1319356021_thumb.jpg

post-62269-0-52018500-1319356069_thumb.jpg

post-62269-0-80793900-1319356102_thumb.jpg

post-62269-0-27530000-1319356139_thumb.jpg

post-62269-0-51933200-1319356181_thumb.jpg

post-62269-0-82525800-1319356217_thumb.jpg

post-62269-0-16549500-1319356260_thumb.jpg

post-62269-0-23526700-1319356297_thumb.jpg

For Sale R32 bits from a 2 Door

. R32 - Vented Fibregalss Front Guards in Gunmetal Grey. In pretty good condition. RH Guard has part of a Fibreglass GTR kit on it and is sikaflexed on. $250ono for the pair.

. R32 2 Door - Fibreglass Side Skirts In Gunmetal Grey. Not the best condition. RH skirt is GTR N1 Style & LH Skirt is Type M. $60ono for the pair.

. R32 GTST - Front Indicators painted but look awsome on a dark color car. $70ono

Or take the lot for $360. Feel free to come and have a look at the parts. Willing to swap everything + Cash for a Genuine N1 GTR Front Bar in any color but would prefer Gunmetal.

Located southern suburbs. PM or txt for further info 0433 522 234

Cheers Tim

Forgot to put this pic up to show what they looked like on the car. What they look like on the car.

post-62269-0-19344000-1319363425_thumb.jpg

SaBelt 4 point harness 50$

Rb20 turbo 50$

R32 full catback (big) with cannon 100$

R32 front reo 50$

Teritorys stockies 200$ x 4

R32 drivers seat 50$

Back seats 50$

Mint center console 30$

Full set mspec Flore mats 80$

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...