Jump to content
SAU Community

Recommended Posts

hey guys as title says just need a bit of help before i take the next step

im going to put a Series 2 Front Bar on my Series 1 R33 and have been told i need a Series 2 REO bar as well as the bumper. Im guessing the series 2 reo will still bolt straight on to my r33 (series 1)'s chassis ?

and also with a Series 2 Grill will that fit into the lugs of the Series 1 headlights flush ?

cheers

hey guys as title says just need a bit of help before i take the next step

im going to put a Series 2 Front Bar on my Series 1 R33 and have been told i need a Series 2 REO bar as well as the bumper. Im guessing the series 2 reo will still bolt straight on to my r33 (series 1)'s chassis ?

and also with a Series 2 Grill will that fit into the lugs of the Series 1 headlights flush ?

cheers

Not 100% sure on this, but I think you also need the series 2 headlight's and bonnet as they are slighty different to the series 1

what was said above

you will need series 2 bonnet and lights to make the front bar look like it fits properly

you could just fit the front bar, but it will look like arse

guards on series 1 and 2 are identical

  • 2 weeks later...
  • 1 year later...

ahhh yeh, i get what you mean.

nice job on it! looks great with the s2 front :D

if you dont mind me asking, how much did the extra parts cost?

Edited by Skyline_034

Bought the bonnet and lights off a wreck

Bought the front bar and Grille from Japan off import monster.

Honestly, dont really remember as I bought a couple of other things off the wreck at the same time and

Import monster stuff cost about $500 delivered I think

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.  
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...