Jump to content
SAU Community

Recommended Posts

hey everyone,

im new to skylines australia but hav had me 33gtst series 1 for a good few years (sori if this looks dodge as im not sure how to use forums) but lately ive had the problem of the car just losing power and stalling for no reason, no throttle response during its dummy spit, sometimes if im lucky i can get the power back but not always!!!!

i have replaced the fuel filter recently but hav replaced 6 months ago the coilpacks, nismo intank fuel pump, spark plugs. hav checked for vacuum leaks when i did a forward facing plenum so all hoses were replaced, plus if it was a leak itd run like crap at idle, hav also put through injector cleaner and hav tried different 98 octane brands incase of dirty fuel! stil hav no idea, (thinking air flow meter now) but if anyone can help or has had this problem can u please help????

Link to comment
https://www.sau.com.au/forums/topic/355088-no-power/
Share on other sites

It sounds like an ignition cut, not sure a faulty afm would stop the motor but check it anyway, so so what DVS32R said. Also if you have a turbo timer check it. Does it still have fuel to the cylinders when this happens? Could be ECU and injectors?

Link to comment
https://www.sau.com.au/forums/topic/355088-no-power/#findComment-5687019
Share on other sites

hey everyone,

im new to skylines australia but hav had me 33gtst series 1 for a good few years (sori if this looks dodge as im not sure how to use forums) but lately ive had the problem of the car just losing power and stalling for no reason, no throttle response during its dummy spit, sometimes if im lucky i can get the power back but not always!!!!

i have replaced the fuel filter recently but hav replaced 6 months ago the coilpacks, nismo intank fuel pump, spark plugs. hav checked for vacuum leaks when i did a forward facing plenum so all hoses were replaced, plus if it was a leak itd run like crap at idle, hav also put through injector cleaner and hav tried different 98 octane brands incase of dirty fuel! stil hav no idea, (thinking air flow meter now) but if anyone can help or has had this problem can u please help????

i had this happen to my r33,was afm changed to a new one and everything was fine.

Link to comment
https://www.sau.com.au/forums/topic/355088-no-power/#findComment-5689165
Share on other sites

When it happens. How do u get it driving again?

Im thinking afm or ignitor. Both can be affected when they heat up

My R33 S1 runs a 0-100 in 9 seconds when warm... total different car when I first start it up let the oil circulate and put my foot down. I siliconed up the coilpacks, spark plugs are ok but when its warm it runs like crap. The pod is sucking air in from the engine bay and perhaps this could be fixed with an AFM swap? I know the RB30's had big problems with the AFM's. Maybe it will be another thing to check once I have done the wasted spark setup/new plugs.

Link to comment
https://www.sau.com.au/forums/topic/355088-no-power/#findComment-5689851
Share on other sites

mine used to this as well, was very random and i never figured out what it was but it stopped doin it...

I think it has something to do with the solder in the AFM, pretty sure there is a tutorial somehere about how to fix it as well..

EDIT>>>something like this one..

http://www.skylinesaustralia.com/forums/topic/113284-fixing-your-rb26-afms/

Edited by Arthur T3
Link to comment
https://www.sau.com.au/forums/topic/355088-no-power/#findComment-5689895
Share on other sites

I had a similar issue with mine, it would run like poo sometimes and other times it would run awesome, if you stopped at a set of lights it would sometimes just turn itself off, replaced the AFM and no problems after that. Then it came back again, but it was a bit different because it usually happened when driving at night time we could notice the lights dimming, turned out to be one of the amps powering a sub, removed it all and ran a 12" on a smaller amp and it was fine.

Link to comment
https://www.sau.com.au/forums/topic/355088-no-power/#findComment-5690186
Share on other sites

  • 1 month later...

sori the computer crashed couple days after postin this, um i usually get it started again by frantically tryin to crank it again and hopin for the best, actually just heard bout the ignitor today but where abouts is it on the car and how would i test it if possible???????

Link to comment
https://www.sau.com.au/forums/topic/355088-no-power/#findComment-5745691
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • oh they were with that motor, you need to remove the engine to change the spark plugs (don't have to, but it does make it easier)
    • I certainly fall into the annoyed camp, but glad to hear that if it's happening at low boost then I'm not likely going to blow a turbo and end up with metal shards in my oil. Just feels like it prevents me from really driving it without hesitation and "peak" performance. Wonder if it's the VCAM, it did an impressive job of shifting the torque curve and faster spool, but maybe now it's "too fast" and there's too much air for how open the throttle is.  Based on some other threads, will also do some reading on synchronizing the actuators. They are the default actuators that come on the Garrett's and I would think they would be set the same coming from the factory, but if the turbos don't actually work exactly the same way at the same time as previously mentioned, it would be worth making sure the actuators are actuating together properly
    • I went down this rabbit hole before, ended up sourcing a motor from the UK (I'm in Japan) which also didn't function correctly. With the original motor, I disassembled it and reassembled it and it works somewhat, sometimes. What I could deduce from all my screwing around is that there is calibration of the gears on the inside of the motor and two ramps on the main gear which activate switches that operate the motor and move the sunroof either to retract into the roof or tilt. Where I got stuck was that, it seemed in my case that one or both of the switches that are activated by the ramp on the gear did not always activate and thus the motor did not move, causing it to sometimes not retract or tilt (apologies, I've forgotten which way it didn't work.).  Of course this part is discontinued at Nissan now, it's the same part in the S15 but no other models. I also contacted the manufacturer of the component for schematics - forgot the name, they're based in Gifu - but they declined to share the information due to being bound by an NDA, sadly. Looking through my pictures now, it seems I last had a crack at this in 2022. See, I so kindly wrote "open" and "close" next to the switches. If you figure it out, please do tell me. Those little switches, with the red buttons may need to be replaced.
    • It says 300ZX, does that make it an Aus delivered car? Funny how back in the day I just couldn't care less about Z32's and these days I am just in love with them. Back when Nissan was into pushing the envelope. 🤣
×
×
  • Create New...