Jump to content
SAU Community

Recommended Posts

Hey all

So today whilst driving (with my daughter in the car) at speeds of a MASSIVE 40kph I got pulled over (a common occurrence) after the old pop of the bonnet , click of the camera I now have a EPA referral :-( . He says my exhaust is too loud which I wont argue till I have facts , my front mount needs to be emissions tested and my pod filter which is under a enclosed aluminum housing (his argument is the bottom is not enclosed . Has any one had to have a EPA test for any of these 3 things ? My problem is I don't have any stock parts to change over and I imagine the wouldn't be cheap . I'm going to see what my options are regarding the dealer I bought it from because it "passed" a blue slip fitted with these things , the cop said I can write to the EPA and have them hunt down the dealer ?

Link to comment
https://www.sau.com.au/forums/topic/355437-cops-got-me/
Share on other sites

bad luck there,we are all driving our liners with a fair amount of mods.So far in nearly 10 years of having a 33 i have never had pop the bonnet please,i guess being an old girl helps.I hope you get it sorted asap.Genelle. :cheers:

Link to comment
https://www.sau.com.au/forums/topic/355437-cops-got-me/#findComment-5690603
Share on other sites

theres a couple of threads relating to people having these problems...its a major pain in the ass..i had a similar thing happen to me...you dont want to go for an emmisions test coz it is pretty hard to pass...you will not pass with a stock exhaust..

.best option (which i ended up having to do in the end) is just just buy/ borrow or steal standard side mount, airbox and exhaust..swap em over, go to the inspection station get it cleared and it will be sweet, its a lot of mucking around considering 99% of people will just swap it back anyway

good luck

Link to comment
https://www.sau.com.au/forums/topic/355437-cops-got-me/#findComment-5690645
Share on other sites

i got EPA for noise, your car will NEED to be at or under 90 DB at 4,700 RPM. i went to the bloke at granville, he was a knob and failed me first time due the the silencer in my cannon not being fully welded and "part" of the exhaust. i came in at 90 db.

Metal flange piece and steel wool stuffed behind the cat. ive still got it if you need to borrow pm me it might fit.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/355437-cops-got-me/#findComment-5691982
Share on other sites

i got EPA for noise, your car will NEED to be at or under 90 DB at 4,700 RPM. i went to the bloke at granville, he was a knob and failed me first time due the the silencer in my cannon not being fully welded and "part" of the exhaust. i came in at 90 db.

Metal flange piece and steel wool stuffed behind the cat. ive still got it if you need to borrow pm me it might fit.

Mate thanks alot :) if it gets that far il get intouch hopefully it doesn't

Link to comment
https://www.sau.com.au/forums/topic/355437-cops-got-me/#findComment-5692012
Share on other sites

True, at least i know what to do now if i do get done again :)

At the time i got done, i had little money because of job issues and the missus had to help me out to buy all the stock parts, with 2 weeks to get all parts, installed and go for inspection....... I was really up sh*t creek. Makes me sick thinking about it actually.

Link to comment
https://www.sau.com.au/forums/topic/355437-cops-got-me/#findComment-5692561
Share on other sites

Tuff break ive had it happened to me a few times in the past and its getting ever more hard to get these cars past without going through the headaches

of finding the standard parts to go back to :/ luckily for me no emissions.i dont think i would of past with a power fc been told once tuned your car will

produce higher amounts of pollution resulting in failed inspection?

Link to comment
https://www.sau.com.au/forums/topic/355437-cops-got-me/#findComment-5702785
Share on other sites

i have the following if you need it.

Stock airbox + snorkel.

Stock dump pipe (no stock cat back sadly).

Stock Cat.

Stock SMIC with all hoses / piping needed to fit it.

Can also help fit it all if your not familiar with that kind of stuff.

PM me anytime :)

Link to comment
https://www.sau.com.au/forums/topic/355437-cops-got-me/#findComment-5708880
Share on other sites

I have a question, where were you driving when you got defected? I must be out of the loop but I've owned more than 10 skylines in the last 10 years and never been defected once. the closest I came was getting pulled over by highway patrol in a silvia I had just bought. it was heavily modifed, it started life as a CA non turbo auto, but was no SR20, manual, turbo, with trust turbo, stainless mani, nismo 2way LSD, twin plate clutch, 5 stud conversion, full uras kit, coil-overs etc etc. lots of mods. he said mate either get it engineered or take it off the road and make it a race car. he said "my advice is do the second option as it'll never pass rego". he let me off though with just that advice as I had only recently bought it.

Link to comment
https://www.sau.com.au/forums/topic/355437-cops-got-me/#findComment-5709773
Share on other sites

i have the following if you need it.

Stock airbox + snorkel.

Stock dump pipe (no stock cat back sadly).

Stock Cat.

Stock SMIC with all hoses / piping needed to fit it.

Mate you are an absolute legend thanks il get the date of my inspection and msg you thanks again

Can also help fit it all if your not familiar with that kind of stuff.

PM me anytime :)

Link to comment
https://www.sau.com.au/forums/topic/355437-cops-got-me/#findComment-5712285
Share on other sites

Mate you are an absolute legend thanks il get the date of my inspection and msg you thanks again

No worries.

Just throw us a PM on here or a txt on 0403 273 338.

i live on the central coast but work in north ryde so weekend is easier but can work something out :)

Link to comment
https://www.sau.com.au/forums/topic/355437-cops-got-me/#findComment-5712676
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...