Jump to content
SAU Community

Recommended Posts

hey guys i just did a wasted spark conversion and it works great but between 5-7k revs it miss fires... <5k it runs better than the rb20 coils and above 7k it runs way better than normal, what do i do? should i just get new coils? (these are second hand coils.) the leads are brand new from the box and the spark plugs are still the same ones that were running fine before the conversion.

i am now using au falcon coils.

Rb20 needs 7000 rpm lol. Only good thing about them is the fact they rev so freely lol. And yes splitfires are a rip off. I could happily afford a set if I choose to but in many circumstances there is no need. Nissan coil packs do a f**ken good job to last as long as they do. I run nissan items on my track car. No aftermarket coil pack is gunna last 15 to 20 years imo

Going to do a wasted spark conversion soon if I dont sell the R33.... coilpacks are giving me the shits, i dont want to spend $400 to get new JJR ones, so will just run a VN coil pack setup.... then if 10psi wastegate goes ok with it ill upgrade to MSD units. Don't know why everyone isn't doing this, surely the MSD VN V6 packs have more oomph then the RB ones!

hey guys i just did a wasted spark conversion and it works great but between 5-7k revs it miss fires... <5k it runs better than the rb20 coils and above 7k it runs way better than normal, what do i do? should i just get new coils? (these are second hand coils.) the leads are brand new from the box and the spark plugs are still the same ones that were running fine before the conversion.

i am now using au falcon coils.

You installed a new ignition system (completely different to the factory setup) and now spark is breaking down... I would be inclined to REMOVE it all and go back to a stock setup.

My 30DET is running standard RB20 coils with no dramas.

The Neo in my Stagea is running Splitfires as standard neo coilpacks are notoriously dodgy, older RB coilpacks (RB20/26) are pretty damn good.

If you're having misfire issues with a standard setup then I would also be looking at the wiring harness. I was troubleshooting a serious spark breakdown issue when hot on my 30, went through a couple of sets of coils and ignitors before I figured out that it was the plugs on the harness falling apart that was the cause of the issue.

Edited by bubba

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bah! I can't see the point in custom number plates at all. I went to the rego office, fished through a box of "premium" plates (the ones that had the "not as tall" option for the front plate) and picked the one that had a 32 in it. That's the limit of the effort and cost I will put into number plates. The only plate that I'd consider paying for would be 2332, but that's not possible here because it already exists from probably 90 years ago, and it would cost a fortune to obtain it, if it were available.
    • After chasing my tail with LS results..... and cheaper than a turbo swap... How confident are you that the dyno is accurate relative to other results? How fast is the car - What MPH does it actually run? Is this similar to what people running this power would expect?
    • Hi mate I am having an identical issue with my 98 R34 GTT. The engie suddenly cuts out under load at about 3-4k, black smoke out exhaust. Almost feels like traction control kicking in. No CEL but still going to check codes later today. Car was sitting in the shed for about 5 months before hand and only idled a few times, took her out with about 1/4 tank, filled up and thats when the issues started happening.  Threw on a spare set of coils/harness and checked plugs which was no help. Recently had fuel pump/filter changed so surely thats not the issue unless condensation in fuel, I just havent had the time to drain it It's running a hi flow turbo, bosch 1000cc injectors, walbro 450L, Z32, Nistune etc... All about 2000km old.
    • I always wonder where the obsession with legal/illegal spacing on number plates in the UK comes from. Because it comes up in comments in every UK-based video I see on youtube. From my point of view all of your plates look a bit odd. Just because there are no markings whatsoever. In Australia we have the state that has to be on it. In Europe you get stamps and state logos. Yours look a bit like a throwaway draft that people then stuck with. And attached with blu tack so that it falls off at the slightest disturbance. Not trying to hate, but it's interesting how things are done in different countries. Do you have to follow a lettering convention when choosing a custom plate?
    • Hybrid sounds like a supercharger... It's half a turbo, with a belt to drive it! Oh wait, they're just called super chargers...
×
×
  • Create New...