Jump to content
SAU Community

Recommended Posts

They haven't seen any track days :) hardly even been driven on.. I sold the wheels i was using these for so no longer need them, i would keep them for my track car te37's but that build is not likely to be finished until end of the year now so I'd rather sell and use the cash now.

Pics attached... like i said they are practically new, still have the little rubber things on them :laugh: Price is firm at $1700.

post-10650-0-60485800-1299911033_thumb.jpg

post-10650-0-28842200-1299911076_thumb.jpg

post-10650-0-01641400-1299911254_thumb.jpg

there's a date on them?? where abouts? i'll have to check next time i get a chance to go down to the shop

they are not at all hard if that's what you want to know - still nice and soft/sticky

How does the date (of manufacture I suppose) affect the useability of the tyres? Do the tyres go off?

I am thinking of using semi tyres for my daily. Is that a good idea? especially taking into account my car only gets driven once a week maybe.

BTW, good price, as I got quoted $540 per tyre from Traction tyres.

How does the date (of manufacture I suppose) affect the useability of the tyres? Do the tyres go off?

I am thinking of using semi tyres for my daily. Is that a good idea? especially taking into account my car only gets driven once a week maybe.

BTW, good price, as I got quoted $540 per tyre from Traction tyres.

Matt,

I would personally not use semi comps for a street/daily driven car. They're noisy, pick up all loose stones and blasts them into your inner guards, annoying to say the least. Also you won't get the mileage out of them compared to a competent street tyre. I'd say go for some RE11's or AD08's, reasonable grip and very quiet...

Sorry for the hijack, good luck with the sale....

If any tyre is left exposed to the weather over time they can harden and will no longer be safely usable. With semi's, you lose the benefit of the high grip levels. I will check the date when I get a chance to go to the workshop next week, but I know they are still good :) so i don't mind either way, if they don't sell I will be keeping them to use myself.

Matt - they wouldn't last long if you do a lot of street driving on them, but if you want plenty grip and only drive it one or 2 days a week then could be an option. Of course you have to accept the tyre noise and stones flicking up, tram lining etc.

I'm driving my daily around on RE55's but that's because i'm too lazy to change wheels before and after a track day and i don't drive much at all anyway, only on weekends mainly.

ok so I checked the date and they are manufactures in week 50 (December) 2008. If anyone's interested in them drop me an email... no rush to sell, i'll just use them myself if i don't get a reasonable price for them.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
×
×
  • Create New...