Jump to content
SAU Community

Recommended Posts

Have you thought about Soda Blasting? I've had the paint blasted off some plastic grill parts and it looks great. I've seen it strip the ink off a coke can and the can was fine. I'll post some photos when I get home later to show you the results. I'll also find the name of the bloke that did it for me.

Link to comment
https://www.sau.com.au/forums/topic/357458-acid-bathing/#findComment-5714641
Share on other sites

cheers , yes I was considering soda blasting there's a guy in carrum downs does it..

But I ended up going to paint mobile in dandy , he recomended some industrial paint stripper and it worked a treat..

I guess the stripper I was using just wasn't toxic enough to strip powdercoat :)

Link to comment
https://www.sau.com.au/forums/topic/357458-acid-bathing/#findComment-5714729
Share on other sites

There's paint stripper and there's paint stripper. The former being a clear, glue looking stuff that seems to just fade paint after half an hour. The latter closely resembling lava in both appearance and touch that seems to make shit bubble and peel after 5 minutes. Thick gloves = necessity lol.

Link to comment
https://www.sau.com.au/forums/topic/357458-acid-bathing/#findComment-5716239
Share on other sites

yeah thats the stuff, thick brown goo the can sizzles when u shake it..

I tried 3m spray stripper. 20$ for 2 cans did nothing

some green stuff from bunnings 40$ a litre was a little better but still no good.

25$ for half a litre of the good stuff from paint supplies store, i used half a tin and job done.

Link to comment
https://www.sau.com.au/forums/topic/357458-acid-bathing/#findComment-5717705
Share on other sites

Yeah, you paint the stuff on with a paintbrush :)

You had any splash on your skin? Instant BURN.

The one the smells like ammonia?

We used to put a drop on our palms and see who could hold it out the longest...

but i've always thought they wouldn't work on powdercoating because its like baked on plastic.

Link to comment
https://www.sau.com.au/forums/topic/357458-acid-bathing/#findComment-5719110
Share on other sites

No, the one that you smell and it burns your nose just because of the fumes lol. There's no way you could put this one on your palm and see who can hold it there the longest - it starts burning instantly and leaves something of a nasty chemical burn after 5-10 seconds.

Link to comment
https://www.sau.com.au/forums/topic/357458-acid-bathing/#findComment-5719487
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Great work! Thanks for documenting the process.
    • How would you even adjust the clutch if the pedal already has the correct free play? The operating cylinder has no adjustment in mounting position or rod length. On pull style clutches there is also no ability to adjust the bearing carrier. Push type I can see how adjusting the carrier height makes it all work.   If this is the twin plate clutch did you verify that your friction disks were oriented correctly? It's not mentioned in the directions at all you just have to notice that one side the friction disks have a part number on the hub fingers and a subtle coning to those fingers. Another thing that I noticed was if you put the friction disks in backwards the pressure plate fingers will not be even and flat when the clutch is installed.
    • yeah, mechanically, it is probably do-able, off the top of my head, there would be the transfer case, which I believe will bolt up to the rear of the RWD transmission, the shorter rear tail shaft. A front drive shaft, front diff, engine upper sump, front drive shafts, front hubs and front AWD struts (they are shaped around the front drive shafts), LCAs (at the very least from the front suspension) oil cooler.  You might want the rear diff from an AWD too, so you can be certain the front and rear diff rations are identical.  Who knows what brackets and mounts you might need.  So a whole doner car might be the best option if you need to maintain RHD. Then actually making it work, that would be a whole different story.
    • Take the fall as a warning sign for future endeavours  Stay safe mate
×
×
  • Create New...