Jump to content
SAU Community

Recommended Posts

which bridge boiracer? there are 2,

1 @ pumicestone and th other @ williams ? but nah diddnt see it...damn!

prolly kaaned it and hit the grid lock line of cars, due to resurfacing that mess of tar they called a road..or the humps they leave when beveling off the tar ..they're some diff crunchers!!

one way traffic for 15 minute intervals at the mom... truly shocking! although good to re stack cd's and change tunes, lol

Just joined sau my pads near strathpine.

Car: R34GTT.

Colour: White.

Mods: Exhaust,19" rims,dumped on super low sup.

Plans for the next Mods:R34 RB26

Owned for:2 years

Other imports: 300zx TT

northside cruz sounds sweet, when and where?

Just joined sau my pads near strathpine.

Car: R34GTT.

Colour: White.

Mods: Exhaust,19" rims,dumped on super low sup.

Plans for the next Mods:R34 RB26

Owned for:2 years

Other imports: 300zx TT

northside cruz sounds sweet, when and where?

We usually go to the pizza capers in the shopping centre on the corner of beams road and gympie road ( first right after the highway ends heading south)

We usually go to the pizza capers in the shopping centre on the corner of beams road and gympie road ( first right after the highway ends heading south)

sounds good but i cant make it tonight will try for next week, what time do you meet ?

hey guys,

i drive a black r32 gts-t

Stock as on a set of 18" rims and an exhaust, ive have the car about 8 months now cruising the caboolture area.

we meet up at the Carseldine shopping center (first traffic light after the bruce at beams road) most Thursday nights in front of pizza capers for the north side meetings but there hasn't been many ppl show up so far.

other than random hero and chris would like to see some more locals show their faces to make it more worthwhile. normally get there around 7:30 (ish) and have a bite to eat so if you feel like being social swing by :D

edit: oops wrong thread... how'd i manage that!?

Edited by mumslayer

Any one else have grief with ball joints and rear rack ends, I fix one, another goes, it's getting beyond annoying.

damn facking maintenance. My slug is still M.I.A

nah not yet mate. 45 thou km's and no issues. tie rod ends on the front are apparently a bit of an issue. 1 of mine is gettting to the point of needing replacing.

hey guys,

i drive a black r32 gts-t

Stock as on a set of 18" rims and an exhaust, ive have the car about 8 months now cruising the caboolture area.

we meet up at the Carseldine shopping center (first traffic light after the bruce at beams road) most Thursday nights in front of pizza capers for the north side meetings but there hasn't been many ppl show up so far.

other than random hero and chris would like to see some more locals show their faces to make it more worthwhile. normally get there around 7:30 (ish) and have a bite to eat so if you feel like being social swing by :D

edit: oops wrong thread... how'd i manage that!?

and you didnt mention me.....what am i?? swish cheese?? (no idea what that means)

havent posted my car up, but a few of you know it. White '96 R33 GTST, stocker than a rock. with Black onyx R33 GTR wheels.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
×
×
  • Create New...