Jump to content
SAU Community

Recommended Posts

those look nice there mate, been thinking about getting a new set of boots for the gear boot and hand break, but haven't been bothered as of yet, are they eBay special for like $20 odd plus like $5 for P/H?, if so, can you let me know how they go please

yeah they are, 20 bucks, and 9.90 postage from britania land, the leather is nice. everything fits well, even the rubber top in the gearstick boot. its made to replace the original exactly. i had to trim a little excess around the bottom of the gear boot, and the wire frame in the handbrake boot is a little to soft compared to the original, but hasnt been an issue yet (if it pops out ill add a few dabs of glue).

Mmmm car smells like leather

nice figures mate,

yeah it's sledgehammer like, on another note:

Those who are wanting to cruise down to QR as a group we are meeting at the southbound BP on the highway at 4:30am for a 4:45 leave time, This gives everyone 15 mins to grab some fuel a coffee and a feed.

Those who are wanting to cruise down to QR as a group we are meeting at the southbound BP on the highway at 4:30am for a 4:45 leave time, This gives everyone 15 mins to grab some fuel a coffee and a feed.

Make that 4AM just to account for slow people and a quick hello.

been thinking a little lately, i have 2x 10" thermos i want to install into the skyrine, and i was wondering if this would be benificial or would it be better to just get like say a single 16" thermo

Thermo fans are only benificial if you have a shroud for them. There are some shrouds if my memory serves me correct on ebay that suit the standard rad. Control wise, I'm not a hugh fan of the thermo control units that use the probe in the top hose, you would be better off using a thermo switch sender mounted in a bit of stainless pipe in the top hose. If you have an aftermarket computer you can use it to trigger a relay.

happy laps were double as happy!!

track started getting wet again after we had breaky and they asked us to go out again and dry the track off for them (V8 Experience guys).

sry for leaving yas behind, i was in a hurry. Clint you and old mate (forgot his name already) make it thru ok?? i got to the christening about 3 mins late :P close enough for me :thumbsup:

sry for leaving yas behind, i was in a hurry. Clint you and old mate (forgot his name already) make it thru ok?? i got to the christening about 3 mins late :P close enough for me :thumbsup:

Yeah I just took Joe up to Beams road and pointed him in the direction of the Highway. I saw ralph going back the other way what was that about?

Guys it was good to see you at Double Epic Super-Happy laps!:action-smiley-069:

Thanks for having us, I will finally after 5 years be filling out my membership form and getting that sorted Monday.

haha old mate!

ended up getting home and goin back to bed for 3 hours, 4am is far too early to be getting up..

had a good day though, would have been better if clint didnt steal my ride in Noel's 33!

BTW mate, didnt happen to run into any P plater Lancers on the way home did you ;)???

Edited by GTR_JOEY

haha old mate!

ended up getting home and goin back to bed for 3 hours, 4am is far too early to be getting up..

had a good day though, would have been better if clint didnt steal my ride in Noel's 33!

BTW mate, didnt happen to run into any P plater Lancers on the way home did you ;)???

Funny you should mention P plater lancers, there was one acting the fool on the way home in the wet.

I stole that seat fair and square, I have been eyeing off a ride in the wheelchair since it was unveiled.

You'll just have to come up again when it's at lakeside then he can take ya for a real lap.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...