Jump to content
SAU Community

Recommended Posts

Hey guys,

I recently moved over from Newcastle, NSW and am a big fan of a good Chicken Schnitzel. :yes:

But haven't had any success or luck in finding one yet. Have tried Cafe's, Pubs, Restaraunts. Checked out menus online but still haven't found anything.

Do they have Chicken Schniztel here in Perth? Haha

Cheers guys

Link to comment
https://www.sau.com.au/forums/topic/357525-good-chicken-schnitzel-in-perth/
Share on other sites

Hmmmm

I dont know from personal experience having never been there.... But I would personally suggest the Rembrandt in mt lawley... It's a polish restaurant...

I've heard it takes ages to get your dinner but apparently the food is f**kibg incredible

On the topic of good food in Perth - I've been struggling a little too.... can anyone tell me where to get a decent char grilled steak? Definately going to check out Nicholson's bar & grill, drive past it everyday it seems but I've never actually noticed it!!

HOLY BALLS.

i can feild this above question... but i cannot remember the fking name!!!!

it's next to the old swan brewery.. it's an italian sounding name...

but they do it good.

bit expensive however.. but i like cheap casual eats so what would i know!! :P

my favourable eating pleases in perth

ASIAN:

Munch Terrace - East perth, sinagpore/malay

Hawkers Cuisine - singaporean - northbridge chinatown

Tasty House - Northbridge china town - GREAT chinese food - not greasy, very clean

Golden King BBQ - Canning Vale - best chinese in perth IMO, also does BBQ meats..

Bintang Cafe - Vic Park, Indo.. mainly Madura food - Mi Ayam Jamur Pangsit is the bessstttt.. home made noodles

Ari-ga-ta-ya - Roe Street Northbridge - ramen house. home made noodles. delicious shoyu broth

To-To - vic park, vietnamese, good Pho

favourite western food:

ALFREDS KITCHEN - (for jimmy - someone take him here and pop his cherry for alfreds??? Group buy?????)

grill'd - he'd know of grill'd but apparently it's better over here?

CRUMPET - vic park... BEST coffee. BEST breakfast in perth... and VERY well priced

and coffee:

crumpet east vic park - only problem is they close fairly early

Poppies - north perth - open till 9... BEST coffee... full flavoured but not too strong taste.

and from what i been reading i'm assuming OP lives around the Morley area.. so please, go to charlies one day and get yourself either a meat pie from the bakery there... OR get some french bread from that bakery...

..or get a roll from the cafe area - i recommend the charlies mixed meat roll. =)

My picks of places would be:

Capri - little Italian restaurant in Freo.. THE BEST italian food from a restaurant (comes close to my irish-turned-italian mrs' cooking :P) and quire reasonable prices.

Chu Sing Chinese Restaurant in Stirling - along with the Capri, been going there since I was a little kid, the benchmark I hold all other chinese restaurants to.

+1 Alfreds Kitchen

Most Hogs Breaths do a good steak

Hippos Creek (although their 1kg steak broke me :( )

Late night/early morning (24/7) Bacon/Egg/Cheese roll, I usually hit up the Roadhaven BP truckstop in Kewdale.

The RE Store is the bestest continental deli eva. When I had a parking spot in the building I used to drive to the Leederville store for lunch quite often.

Edited by bubba

Thanks guys - will have to put them on my list! If only I wasn't so far away.....

Wouldnt take long to get there in the GTR

We only come up to the city every few months and always try to drop in to Hans Cafe at carousel.(think they are spread out across the city) the "Mee Krob" is unbelieveable. tastes nothing like chicken schnitzel but... :whistling:

hell no i`d get lost. usually just stick with suburbs i know. only seen northbridge at night after getting on it...not sure what the rest of hans menu is like as Mee Krob is the only thing ive tried.

You come to the city and think Hans is good lol.

Not been to Northbridge, have you?

If you think Hans Cafe is crap where do you recommend? Haven't found any decent pub or cafe yet that has good food at reasonable prices..... There's gotta be a heap

somewhere. Adelaide has Gouger St for Asian food, can't

go wrong... Surely Perth has some good cafe strips other than Freo?

Basically ANY chinese restaurant in northbridge will have you satisfied... All the shit ones are out of business (more or less)...

I love Regal on Roe for dim sum personally. (their lobster is yummy too)

Golden Century is also pretty awesome.

Also, I randomly went with a chicky friend to NB and just got dragged in by a shop owner offering us discounts for trying their stuff - was amazing. Forget name but know where... Its next door to a lan cafe.

*For Chinese food obviously.

Edited by Ten Four
  • 3 weeks later...

who knows where good sushi is at? we stopped at Zushibento in cannington other day and cost $55 was mediocre and we didnt have that much. would have cost $20 in Japan. have heard of Jaws but had trouble finding it once before.



  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...