Jump to content
SAU Community

Recommended Posts

I just wanted to touch on that horsepower thing the other guy was talking about.....I was doing a little thinking about the horse, the rope and the weight etc. Does the weight of the rope enter into the equation and could the 1.8hp horse actually be using a lighter rope and therefore 'generous dyno'???

Link to comment
https://www.sau.com.au/forums/topic/357541-sorry-nismoid-i-wasnt-finished/
Share on other sites

  • Replies 62
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

What if you stuffed said rope down horses spark plug hole. Would that up the c/r enough to make one horse a two horsepower horse.

wtf Noel! The rope is going to reduce the cc capacity of the chamber, in turn, reducing it's volumetric gallop ratio

I just wanted to touch on that horsepower thing the other guy was talking about.....I was doing a little thinking about the horse, the rope and the weight etc. Does the weight of the rope enter into the equation and could the 1.8hp horse actually be using a lighter rope and therefore 'generous dyno'???

Did you like the explanation of the history of the word boost. I thought it was pretty good.

As far as a generous dyno goes the weight of the rope is a constant. Dynos have to use the same grade rope. There will be some differences in the weight between the rope, the two main rope manufacturers of the day sourced their twine from different sides of the country, and there was some density difference, but this was so small that the weight difference is negligible compared to the weight of the mass.

That is not to say that generous dyno's didn't exist, because they did. When the horse did a "pull" on the dyno there was a person who had to count the revolutions of the sheave in a 30 second period if this guy got the count wrong by a rev or two that could put out the actual HP reading, Wetheringtons Horse Dyno Service was notorious for this as they used to employ the cheapest dyno operators who usually had trouble counting, giving a false reading.

Edited by robincooper

Did you like the explanation of the history of the word boost. I thought it was pretty good.

As far as a generous dyno goes the weight of the rope is a constant. Dynos have to use the same grade rope. There will be some differences in the weight between the rope, the two main rope manufacturers of the day sourced their twine from different sides of the country, and there was some density difference, but this was so small that the weight difference is negligible compared to the weight of the mass.

That is not to say that generous dyno's didn't exist, because they did. When the horse did a "pull" on the dyno there was a person who had to count the revolutions of the sheave in a 30 second period if this guy got the count wrong by a rev or two that could put out the actual HP reading, Wetheringtons Horse Dyno Service was notorious for this as they used to employ the cheapest dyno operators who usually had trouble counting, giving a false reading.

Were they located in Perth?

Who? Wetheringtons? The first Wetheringtons was a mobile service that went around to all the goldfields in Victoria so the miners could have their horses dynoed before they bought/sold a horse. The guy who had the mobile service, Arthur Wetherington later set up a workshop in Bendigo which was a great success. The business model was then franchised out to different people and I believe for a short while there was a Wetheringtons franchise in Perth.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks mate, couldn't find in VIC, ended up ordering one from NSW, getting rwc to get new plates and registration done.
    • Before all the EFR fan boys come in, have a look at: https://www.garrettmotion.com/racing-and-performance/performance-catalog/turbo/g-series-ii-g30-825-58mm/ It also comes in a T4 1.06 divided housing. I would dare say if you want response & also decent power, this thing would chop.   AND apologies, just re-read your post, you've already bought the turbo... whatever you do, make sure you stick with divided housing and proper twin scroll manifold.
    • People have got to stop doing that. ShatGPT is not a search engine. It is a hallucination factory.   I also would recommend the 1.05. The .83 will "work" for you , in that it will be more responsive, but I think you'll find that it won't be anywhere near as good running it out to 8000rpm as the big housing will be.
    • Decided for the first time ever I would tow my car TO the track day on the same working theory as bringing tools and spares "if I have it I wont need it, but if I leave it behind i will 100% need it" all setup and ready to go out and try these A050 for the first time First session showed I needed to stiffen up the dampers a touch but still managed a few 1:21's without much effort. things were looking good. Came in a dropped the tyres down  to 26/28 as they had gotten to 35/33C from 22C cold The first lap of session two I managed to drop into 1:20's. Then in the second lap into the second session. Coming into T3 and I suddenly lost brake pedal followed by some huge rear end vibrations and scraping sounds. Got it back into the pits after session ended and found this. in the attached video, all of the wobble is in the hub its self, wheel is mint, and bearing feels tight. lKXLqpd - Imgur.mp4   Deciding it was a bent spindle I tried to find bearing/hub assembly locally but was unsuccessful so it was loaded back onto the trailer i luckily brought it on to drag it back home  
    • 1.05 you’ve gotta let it breath 
×
×
  • Create New...