Jump to content
SAU Community

Recommended Posts

  • Replies 62
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Who? Wetheringtons? The first Wetheringtons was a mobile service that went around to all the goldfields in Victoria so the miners could have their horses dynoed before they bought/sold a horse. The guy who had the mobile service, Arthur Wetherington later set up a workshop in Bendigo which was a great success. The business model was then franchised out to different people and I believe for a short while there was a Wetheringtons franchise in Perth.

Were they related to the pigeon racing wetheringtons from Woy Woy ?

He aw He aw..... He awlways asked this question.

If only the rep buttons were still there, that's a plus one :thumbsup:

Back on topic, I believe that donkeys are the diesel of the animal kingdom, Not huge power, but heaps of torque

If only the rep buttons were still there, that's a plus one :thumbsup:

Back on topic, I believe that donkeys are the diesel of the animal kingdom, Not huge power, but heaps of torque

That was borrowed from the LULZ thread I believe. The Kings Speech.

Anyway, I will leave you with the history of the boost.

As far as horses making 1.5 HP it is very possible. I mean we all know horses have power-bands, like any engine. You know how when you ride a horse and when you squeeze your boots into it and it goes from a trot to a canter to a sprint and you feel the increase in torque, they called that the "boots" but somewhere along the line it was misread as "boost", so the term boost that we all know so well actually comes from the good old days when we all used horses to get around.

While on the subject of donkeys and horses.

What other animal would you say a donkey would be closely related to?

If you said horse you would be correct. They are in the same family tree as say a cat and a lion. A dog and a bear.

A donkey's DNA and a horse's DNA are so similar that they can actually mate and produce offspring. Only animals with similar DNA can do this. Therefore a cat and a horse could not produce offspring.

Now to my point.

The closest related primate to humans has DNA that is even closely related than that of the horse and the donkey.

Therefore the primate and a human could actually mate and produce offspring.

Food for thought.

The closest related primate to humans has DNA that is even closely related than that of the horse and the donkey.

Therefore the primate and a human could actually mate and produce offspring.

Food for thought.

That explains so much about America's last president

I think the point has been missed. When a horse does a dyno pull it's a measurement of how far the horse can actually pull the dyno, converted into horsepower. This may explain the difference between dyno readings, as some dynos are heavier than others. I understand the distance can be improved by the fitment of a Polarhorseariser.

That explains so much about America's last president

Explains a lot of the dumb shits on this planet lol.

EDIT: I swear the gods are looking down on me some times.

I just got a personal message that explains my DNA fact above.

This was a message I just received from a guy called NSNPWR.

Hey mate, remove head from ass anytime youre ready...let me just say a few things...I, like old mate in that thread ran 12s in my VL with around [email protected] to be precise with 205rwkw (on a DD dyno) out of a single cam RB30...Hiflow T3, T04B front, Haltech ECU, STOCK inlet and exhaust manifolds, STOCK head, baby Waggott cam, Jatco 4 speed and 2800 stall...I have the time slip right here if you' like to see it?...Pound for pound, a single cam RB30 will make as much if not more than a 25 and will hand a 20 its ass all day everyday!...Have you ever driven one with a decent setup? didnt think so...I know of one car here in SA that went low 10s at near on 140mph with the stock MX7 manual, 35/40 (1.06), Tighe cam with the stock head! That car made over 400rwkw on a hub dyno...I could go on but suggest you go do some reading before shooting your mouth off in future.

Cheers, Darren.

This message was aimed at my comment about no way in hell the OP in the previous thread made 200rwkw from a NA RB30 from spending $2000.

Any one notice the key factor that NSNPWR has some how missed? One key element?

How we survive as a species is beyond me.

While on the subject of donkeys and horses.

What other animal would you say a donkey would be closely related to?

If you said horse you would be correct. They are in the same family tree as say a cat and a lion. A dog and a bear.

A donkey's DNA and a horse's DNA are so similar that they can actually mate and produce offspring. Only animals with similar DNA can do this. Therefore a cat and a horse could not produce offspring.

Now to my point.

The closest related primate to humans has DNA that is even closely related than that of the horse and the donkey.

Therefore the primate and a human could actually mate and produce offspring.

Food for thought.

Well chimpanzees are most closely similar except we cannot mate with one since we have millions of base pairs of DNA that's different. Not to mention the fact that we have 23 pairs of chromosomes and they have 24.

Mating a female horse with a male donkey - Mule

Mating a zebra with a donkey - Zonkey

Mating a female tiger with a lion - liger

Just a few of the bizzare examples :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
×
×
  • Create New...