Jump to content
SAU Community

Recommended Posts

Here are the pics I took at the dyno day .... unfortunately my old camera died and the one I used on the day had no flash, so there aren't many action shots on the dyno :D .... if anyone doesn't want their picture on here, or want your number plate blacked out please let me know and I'll change it.

Enjoy

Link to comment
https://www.sau.com.au/forums/topic/35786-dyno-day-pics/
Share on other sites

Nah I was there and chatted to you a bit about cameras and stuff - my car is the maroon R32 in your 4th post.

I went for a crusie afterwards and had a big lock up, straight line luckily, near Meadows on one of the back roads.....saw a give way sign a bit late!! Afterwards my car didn't seem to feel very good so I'll get it checked out when my EBC arrives in the post and I get everything tuned.

Link to comment
https://www.sau.com.au/forums/topic/35786-dyno-day-pics/#findComment-714286
Share on other sites

There ya go Matt and Steve - pics amended as requested .... anyone else unhappy/want a change made?

Also, if anyone wants an original resolution/non compressed photo from here, PM me and I'll email an original to you. Same goes for any cruise or whatever photos I post - I cut them all down and compress them, and sometimes/usually the quality suffers as a consequence. If you want originals, all you need do is ask :P

Link to comment
https://www.sau.com.au/forums/topic/35786-dyno-day-pics/#findComment-714865
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...