Jump to content
SAU Community

Recommended Posts

First and foremost I wish to extend my condolences to the people of Japan. I don't have an economics or commerce background so I need some answers from some one who may have a better insight into the matter.

The question I have is exactly how much will these incidents affect import cost and import quality. I would imagine that a number of import vehicles would have been damaged but that's just going on presumptions.

Prior to the disasters, we where buying approximately 82-3 Yen for every $AUD, several days after the incidents we dropped to 73 from memory and now we are back up at about 80. I recognise the fact that a lot of Japanese investors are pulling out from overseas markets and backing up their economy, in saying this what will the ultimate result be say in 3 months time?

Edited by PSI-FED
  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

Hi PSI

to answer a few questions you have i would say the exchange rate has always been a major factor in exporting to Australia so i don't think much has changes as you just need to allow for this as a factor for importing. so yes it does impact the costs to a certain degree, but all leading importers always factor this into account.

As for Quality goes nothing changes any vehicle that have been flood effected get a certain rating usually grade 1 from auctions if the make it that far and really most cars affected will go straight to recycling plants as most of you would have seen the amount of damage to these cars on TV they are completely wrecked. Also the effected communities are not the types of places that you would see many performance vehicles or such as they are fishing villages and or small farming areas. finding a flood effected vehicle in the market for Australia i would assume is fairly well protected and if you are using buyers in japan that you have had long standing relations or know of many that have held high reputations should easily provide the information on any vehicle that has been involved in such floods or tsumami effected areas. also these areas are not normally areas exporters buy from also but this does not mean vehicles from these location do not get exported or moved to large auctions in japan.

another reason you would not see so many tsunami effected vehicles at auction is the superstition that Japanese have with all things used and one of the biggest items is the bad luck passed on by previous vehicles owners. i myself have spent many times at recycling plants in northern Japan buying vehicles for parts i have seen so many things inside cars that would make you think why is that still inside the car ( IE Mobile phones, clothes nice , jackets , brief cases , many CDS , jewelry and other personal effects) these are left inside the cars because if the owners survive the accidents the believe that the bad luck should stay with the cars and just walk away not claiming anything from inside the cars once they are clear. funny as it sounds but true in many cases.

Ultimately at the end of the day yes it does effect us importing for us in some ways but i believe the negativity of this being in a bad way will not factor into exports for Australians in a major way. for those who have had dealings with reputable companies in japan or have someone who is in the know of who is good or not you should continue to use those companies. buying blind off any 1 unknown company in japan has always been a hit and miss and buyer beware.

SSS automotive one of the oldest and most established import businesses in aus. Joe and Geoff have been importing stuff from japan for a long time (like since the 90s). Joe also has what was one of, if not the first RB30 powered GTR in aus (over 10 years old now). it now has over 200,000kms on it! currently pumping out somewhere around 500kw atw. They both travel to japan frequently and Joe has spent years living there buying cars and parts and shipping them back. They have their own house, and big workshop and yard in japan. I really hope their stuff is ok. Both are great guys and work bloody hard for their money.

http://www.sssautomotive.com.au/

That's Sad news :( as is anybody affected by it...

I was once asking for some part for a cefiro when I was younger and dumber... someone told me "SSS have heaps of cefiro handcuts right now!!"

So I was like oh sweet!!

So I jumped straight in my car and drove to SSS auto up the street from me....

http://www.sssauto.com.au/index.htm

...not the same shop

yeah not the same guys. SSS in sydney have been supplying bits all over aus since the aus import scene was in it's infancy. as I said Joe imported his R32 GTR back in the 90s and put a 3litre RB26 in it in the 90s too and ran masive tiwn high mount 2835s on it for around 400kw, with 6 speed box, big AP brakes etc and lots of cool touches. I think it had 30,000kms or something on it when he bought it and now has over 200,000. it's a very nice GTR still today.

yes.. it was an awkward moment for all when i walked into the reception area demanding to view their A31 cefiro halfcuts and saying that i was so hapy that someone local had a cefiro halfcut cos it was so hard to find parts for my car...

the owner comes out n he's like

...wtf is a cefiro. you mean a commodore?? we sell tail lights for your commodore...

my panel beater is waiting on parts from nissan japan to send over here so my car can finally be repaired but there are massive delays atm..the parts were ordered a couple of days before the tsunami hit so they hadnt been sent yet. has already been two months since the accident so little bit longer cant hurt compared to the suffering of other eople at the moment.

panel beater was saying that toyota and nissan are both shut down in japan at the moment

hope the news bout SSS turns out to be false, have got parts from there several times, really great guys

bad news for all concerned over there but any involved all over the world with any industry effected. i am tied up with uranium study and production and hearing all sort of negatives about the situation. regardless of that anyone remember what happen with the dunlop factory in Kobe when they had there problems there. took years for production to get up and running again. About 20% of solar panels that we use here in Aus are made in areas affected and will yet again takes years to catch up.

more important than all this is the loss of life and total loss of families.

yeah I checked about SSS last night. it's true unfortunately. and Geoff was over there at the time. he was lucky to get out when the quake hit but he said the yard is gone. :(

Given japan has bought back /repatriated a lot of its currency is thier currency going to get stronger?

This along with the supply available makes me think things out of Japan are going to be more expensive. Time will tell.

Japan currency wont get higher as the Japan Bank has poured billions of yen in to stop this happening.

If they hadnt you would have probably seen the Aussie dollar in the very low 70's if not lower and same for the US dollar against the yen right now.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...