Jump to content
SAU Community

Recommended Posts

Hmm - while he was a bit silly for not getting the DPI to state in writing that he was allowed to get his license back, there are govt f*k ups that work in our favour. Unfortunately for him it did a backflip and caught him..

Dan/Rob - you guys are probably right in some respects, but are also being pretty harsh in others.. we've all done stupid things when we were younger, I think there's alot of luck involved.. It's the old - "I got away with it, know I was lucky & know not to do it again" syndrome.. hindsight is a wonderful thing.. and Rob - someone like you or me or Dan could probably have about 5 std drinks and not blow more than 0.02, but a 17/18 year old without as much around the middle as us would be a different story.. :D

I think Joe has come up with the best way of attacking this. Write to the Ombudsman for unfair/inconsistent treatment by the Police/DPI and get a good Lawyer. I'm sure they're just trying to throw the book at him, but once the real circumstances are found out by a Judge things may look a bit more favourable for him..

That said - he still has another 7 months to serve on the suspended license - if he gets away with just having to do that and nothing else he should count himself lucky, not be pissed off at the system that made a paperwork muckup that he took advantage of..

My 2 cents anyways for what it's worth.. :)

i think ur friends goin down and it will for for quite awhile. his best chance of getting off is calling in the media. but to do that he has to admit he was a bad driver in the first place or they will pin everything on him.

with the license he was still probationary. if he lost his licence or had it suspenned when u get ur licence back your 'p' plate period starts afresh.

unless they have changed that law in the last few years. this happened to a friend i use to work with.

the media would cricify him the same way that dan and rob have.

get a good lawyer

dont rely upon the misgivings of an internet forum.

sounds like he's ****ed himself by listening to people that don't know what theyre talking about enough already.

I can sympathise with his plight though.

Also, you people basing these harsh views on very little information. I have lost my license previousely twice for Dangerous driving, yet in both instances I was no danger to anyone but myself, and even then it was minimal if at all. Also if I had gone to court with a lawyer I know both times i could probably have gotten off the offence. Naturally hindsight is a wonderful thing. :D

Its all his fault, Judge says, you dont drive for 12 months, you write down what day judge said this, and on that day in a year time you get your licence back, its pretty black and white if you ask me, of course some pencil neck in some office is gonna say sure, you can go for your licence, your over age, but the people who matter, the courts and to enforce this the police have said you dont drive for 12 months, geddit?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
    • I suppose it was relatively stock too, the JZ motor handle most mods thrown at them without even breaking a sweat 
×
×
  • Create New...